A family company manufacturing in the USA
www.glastender.com
LP48L-BL(LR)
4004503
Conforms to NSF/ANSI STD 7 and UL STD 471
Certied to CSA STD C22.2 No. 120
Meets NSF 7 requirements for closed container products
Project:
Item #: Qty:
Model #:
Low Prole Coolers
Two, Three and
Four Door Remote
LP__ _ -_ _ (___)
Size
48 = 48" Two Door
72 = 72" Three Door
96 = 96" Four Door
Refrigeration
Hook-Up Location:
L = Left or R = Right
† Specify a hinge location for each door
AIA#
SIS#
Door Hinge Location†:
(from left to right)
L = Left or R = Right
Top Style:
N = No finished top
L = Laminated
S = Stainless
D = Drainboard
Door Style:
B = Black vinyl-clad
U = Unlaminated
L = Laminated
S = Stainless
G = Glass
X = Stainless Glass
Y = Laminated Glass
Standard Features
• Remote unit
• All stainless steel interior with radius corners is easy to
keep clean
• Locking doors
• LED interior lighting
• Available without a finished top for integrated installation
Specications
Electrical
• 120V, 1 phase, 60 Hz
• Dedicated 15 amp circuit is required
• 14 gauge wire connection is made inside the cooler next to
evaporator housing - interior access is through one of the 3/4ʺ
side knock-out holes (electrician’s choice)
Refrigeration
• R134a* or R404a* expansion valve & temperature control
included. Specify type required when ordering.
• Refrigeration system capacity requirements*:
LP48 - 1,265 BTU/hr
LP72 - 1,850 BTU/hr
LP96 - 2,170 BTU/hr
* BTU/hr design loads are gured assuming 85° F
ambient, all glass doors, maximum internal loading, and
average compressor cycling. No solar heat gain has been
accounted for.
• All refrigeration hookups are made at the installation site
Plumbing
• A ten-foot length of 1/2ʺ ID by 5/8ʺ OD plastic tubing is
provided to drain condensate. The tubing should exit through
one of the 3/4ʺ side knock-out holes (installer’s choice). The
maximum drainage is one ounce per hour - consult local codes
for compliance - a oor drain may be required.
below customer supplied bar top
• 180° swinging doors
• Leg sockets recessed into base
• Stainless steel evaporator housing with separate removable
evaporator drain pan
Shelving
• One adjustable coated shelf and one bottom coated rack per
door included
Materials
• Stainless steel parts include: interior, front of cabinet, hinges,
hinge and lock brackets, and optional legs
• Black vinyl-clad steel parts include: standard sides and doors
• Galvanized steel parts include: exterior sub-top, back and
bottom
• Zinc plated CR steel parts include: leg sockets
Weight Bearing Capacity
• Counter tops and other accessories should not exceed 500
pounds per door
Capacities LP48 LP72 LP96
• 12 oz. bottles, cases 10.3 16.8 23.3
• 750ml wine bottles 84 126 168
Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA Rev. 01-19-17
4.07
Approval/Notes:
STANDARD CABINET WITH OPTIONAL 6" LEGS
PLAN VIEW
Remote Low Prole Coolers
Dimensional Information
18"
BACK LINER TO
INSIDE DOOR SILL
23-3/4"
DOOR
OPENING
X
Y
28-15/16"
EVAPORATOR
HOUSING
20-1/2"
10-5/8"
FRONT VIEW
7-3/8"
ADD 1" TO HEIGHT
FOR FACTORY
INSTALLED TOP
180° SWING
2"
29"
NOTE: Available with refrigeration
hook-up location left or right.
Use Model Number Key to specify
location when ordering.
SWING WILL
CONTINUE IF
NO CABINET
TO IMPEDE
Model X Y Doors
BB48 48" 44" 2
BB72 72" 68" 3
BB96 96" 92" 4
6-11/16"
20"
ADD 1" TO HEIGHT
FOR FACTORY
INSTALLED TOP
25-1/4"
7-3/8"
24-3/4"
20"
24"
EVAPORATOR
HOUSING
29"
SIDE VIEWS
22-3/4"
180° SWING
ADD 1" TO HEIGHT
FOR FACTORY
INSTALLED TOP
48"
25-1/4"
29"
22-1/2"
6"
5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
Loading...