Glastender BB108 Series, ND72 Series, ND52 Series, ND92 Series, FV24 Series Operation Manual, Parts Directory, And Price List

...

Download

Operation Manual, Parts Directory and Price List

A Family Company Manufacturing

In The USA Since 1969

Vertical Door coolers

self-containeD MoDels - BB24, BB36, BB60*, BB84*, BB108*, ND52*, ND72*, ND92*,

FV24*, FV48*, LP60*, LP84*, LP108*, PT60, PT84, PT108, KC24, KC48, KC52, KC72, KC84*

reMote MoDels - BB24, BB48, BB72, BB96, LP48, LP72, LP96, PT48, PT72, PT96 Dry storage MoDels - DS24, DS48, DS72, LPDS24

*see Page 2 for iMPortant cooler serial nuMber inforMation

Rev. 06-29-15

FV24-BS(L)

BB60-L1-XSH(LR)

BB72-R1-BLN(LLR)

shown with optional wood panel doors

Glastender, Inc. · 5400 North Michigan Road · Saginaw, MI · 48604-9780

800.748.0423 · 989.752.4275 · Fax 800.838.0888 / 989.752.4444 · www.glastender.com

PT60-L1-LLH(LR/RL)

serVice anD Parts

Cooler Serial Number Information ................................................................. 2

Terms and Conditions...................................................................................... 3

Warranty .......................................................................................................... 4

installation

Introduction ..................................................................................................... 5

Utility Requirements and Connections ........................................................... 5

Uncrating and Start-Up Instructions ............................................................... 5

Operation ......................................................................................................... 5

Cleaning Instructions ..................................................................................5 - 6

Floor Sealing Instructions ............................................................................... 6

BB24 Minimum Air Flow Clearance Diagram ............................................... 6

Cooler Installation Checklist ........................................................................... 7

Cooler Design Change .................................................................................... 8

sPecifications

Electrical and Refrigeration Specifications ..................................................... 9

Wiring Diagrams ...................................................................................... 10-14

Endwall Models ...................................................................................... 10

Self-Contained Models ............................................................................11

Remote Models ....................................................................................... 12

Remote Models with Solenoid Control .................................................. 13

Built-in Fluorescent Light Fixtures ........................................................ 13

BB24 Self-contained and KC24 Models ................................................ 14

rePlaceMent Parts

Compressor and Condenser Related Parts ............................................... 15-22

BB24 Self-Contained & KC24 ............................................................... 15

BB36 ....................................................................................................... 16

LP60, LP84, LP108, and Non Endwall BB60, BB84, BB108,

ND52, ND72, ND92, KC72, and KC84 ................................................. 17

BB36, BB60, ND52, and KC52 Endwall ............................................... 18

BB84, BB108, ND72, ND92, KC72, and KC84 Endwall ..................... 19

KC48 ....................................................................................................... 20

PT60, PT84, PT108 ................................................................................ 21

FV24 and FV48 ..................................................................................... 22

Evaporator and Related Parts ................................................................... 23-25

Doors and Related Parts ........................................................................... 26-29

Shelving, Racks and Related Parts ................................................................ 30

Refrigeration Compartment Covers .............................................................. 31

220 Volt Electrical Parts ........................................................................... 32-33

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

cooler serial nuMber inforMation

bb & nD cooler serial nuMber inforMation

This manual is specic to self-contained BB60, BB84, BB108, ND52, ND72, and ND92 coolers

prior to the serial numbers and dates listed below.

BB60R 134121363F 02/26/09 BB60L 134121425F 03/03/09 BB84R 134121457F 03/04/09 BB84L 134121456F 03/04/09 BB108R 134121452F 03/04/09 BB108L 134121226F 02/17/09

ND52R 134121519F 03/09/09 ND52L 134121559F 03/11/09 ND72R 134121906F 04/08/09 ND72L 134121475F 03/11/09 ND92R 134121126F 02/09/09 ND92L 134122745F 06/10/09

fV cooler serial nuMber inforMation

This manual is specic to self-contained FV coolers prior to the serial numbers and dates listed below.

FV24 SN 134143788F and excluding SN 134142753F & SN 134143411F 05-13-13 FV48 SN 134143788F and excluding SN 134142796F 05-13-13

lP cooler serial nuMber inforMation

This manual is specic to self-contained LP coolers prior to the serial numbers and dates listed below.

LP60R SN 134128786F 09-28-10 LP60L SN 134128783F 09-28-10 LP84R SN 134129050N 09-28-10 LP84L SN 134128771N 09-28-10 LP108R SN 134131070N 09-28-10 LP108L SN 134129406N 09-28-10

Kc cooler serial nuMber inforMation

This manual is specic to self-contained KC84 coolers with serial numbers beginning with 404.

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

terMs anD conDitions

Prices:

All prices are LIST. Applicable taxes will be added.

Quotations:

Unless otherwise stated, quotations are effective for 30 days only.

accePtance:

All orders are subject to acceptance by Glastender, Inc.’s headquarters in Saginaw, Michigan. Possession of the Product Directory and Price List is not an offer to sell.

shiPMents:

F.O.B. factory in Saginaw, Michigan. Freight terms are Third Party or Collect if shipped directly to you. Prepay and Add to Invoice freight terms are available upon request. The approximate shipping weights of all products are listed with the prices. Partial shipments will be made unless otherwise specified by the customer. Surface freight classifications are: Glasswashers, Line Chillers - Class 92.5 Cocktail Stations, Underbar Equipment - Class 85 Bar Die/Underbar Equipment – Class 125 Refrigeration Equipment, 48” long or smaller - Class 100 Refrigeration Equipment, greater than 48” long - Class 110

All small items are evaluated to see the most cost effective means for shipment. Many small items ship via UPS or FedEx; however, when dimensional weight is excessive DB Schenker, UPS Supply Chain, or even common LTL carriers are the most cost effective choice. Spare parts orders received before 1:00 PM EST can usually be shipped the same day.

DeliVery:

The majority of equipment is manufactured to order and typically ships within three to six weeks after complete order information is received by the factory. In-stock equipment typically ships within two to three days of the factory receiving complete order information.

returns:

Items specified as “Manufactured to Order” are NOT returnable.

A Return Material Authorization (RMA) number must be issued by the factory in advance for any items that are returnable. The RMA number MUST be noted on the outside of the returned package. Returns must be received within 90 days of the RMA issue date. Shipping charges must be prepaid. A minimum 20% restocking charge will be applied to all authorized returns if received in new, unused condition in the original packaging.

The above conditions apply to spare part returns, except spare part returns must be received within 30 days of original shipment for electronic or electrical parts or within 90 days for all other parts.

loss or DaMage:

For customer routed shipments, Glastender, Inc. is not responsible for any loss, damage, or delay of merchandise during shipment. Such transit claims must be filed with the carrier. Merchandise must be examined on arrival. If shortages occur, Glastender, Inc. must be notified in writing within five (5) days of delivery to honor any shortage claim. Glastender will assume responsibility for freight claims on Prepay and Add shipments but the customer must inspect freight and note any damage upon receipt. Failure to do so may result in losses at the customer’s expense.

The order department is happy to assist with routing or shipping questions.

PayMent terMs:

Cash should be included with all orders unless credit terms have been arranged. To establish credit, banking and trade references are required. A convenient credit application is available upon request. Payment via credit card is not our normal means of receiving payment. Visa and MasterCard will be accepted, but must be charged at the time of shipment. In addition, a payment via credit card for orders totaling more than $500 will incur a 3% convenience fee on the total transaction amount.

custoM orDers:

Custom orders must be paid in advance and are not subject to cancellation.

laMinates:

Some products include common, readily available plastic laminates of the customer’s selection. There may be an additional charge if uncommon varieties are ordered.

05/18/10

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

Warranty stateMent

APPLICABLE TO ALL PRODUCTS SOLD WITHIN THE UNITED STATES AND CANADA

Glastender, Inc. warrants all products to be free of defects in material and workmanship. One-year labor and parts warranty applies to all glasswashers, self-contained refrigeration models, and BDS model bottle disintegration units. In established areas, a start up is included with GT-24 and GT-30 model glasswashers. Warranty is effective for one year from the date of installation or up to 18 months from date of factory shipment, whichever occurs sooner. Glastender, Inc. will replace any part or assembly found defective under normal use and service.

For warranty labor claims beyond 15 months from the date of factory shipment, proof of date of installation or occupancy must be provided. Authorization for labor must be obtained from Glastender within the warranty period and prior to the service being performed.

Labor warranty applies to the United States and Canada only.

Remote refrigeration models and beer line chillers include a one-year parts warranty only. There is no labor warranty on these products.

Field replacement parts not covered under the original warranty include a 90-day part warranty from the date of installation.

FOUR YEAR ADDITIONAL COMPRESSOR WARRANTY: Glastender will warrant to the original user the compressor for all selfcontained refrigeration models for an additional four years following the regular one-year warranty period. This plan applies to the compressor only.

A completed warranty claim form MUST accompany all returned defective parts or assemblies. Upon request, a defective part or assembly must be returned to Glastender, Inc., Saginaw, Michigan, with all transportation and delivery charges prepaid. Warranty repairs or replacements will be shipped FOB factory in Saginaw, Michigan. Reimbursement for applicable freight charges covers ground service only.

Glastender provides in-warranty repairs during a service company’s regular working days and hours. There is no provision for payment of a premium rate during “overtime” hours. When warranty service is requested during other than normal working hours, the end user will be charged the premium portion of the overtime rate.

The warranty covers substantiated travel expenses for up to 2 hours / 100 miles round trip and a maximum of $150. Any additional costs due to installations that require extra work, time, or travel to gain access for service are the sole responsibility of the equipment purchaser. Any exceptions to these travel and access limitations must be pre-approved by a factory representative.

The warranty does not cover equipment subjected to accidents, freight damage, alterations from the original design, improper power and/or plumbing hookups, improper chemical use, general misuse, or lack of routine required maintenance as determined by Glastender, Inc. Installation, normal control adjustments, general maintenance, correcting an installation error, or service calls that reveal the unit is functioning normally will not be reimbursed under warranty.

Condenser coils on self-contained refrigeration products must be cleaned regularly. Failure to provide adequate air flow to a refrigeration unit will void the warranty.

Glastender shall not be liable for loss of use, revenue, or profit, or for any other indirect, incidental, special, or consequential damage including, but not limited to, product spoilage or loss.

This warranty is conditioned upon Glastender receiving notice of any defect subject to this warranty within sixty (60) days of its discovery by the end user or dealer. All products are warranted only for the initial place of installation. Removal of a product automatically terminates this warranty.

SECOND YEAR EXTENDED PARTS & LABOR WARRANTY:

Glastender’s one-year parts and labor warranty on self-contained refrigeration units, excluding beer line chillers, can be extended to two years with the purchase of a two year parts and labor warranty. Specify part number EWR2 ($150 net price) when ordering.

EXPORT WARRANTY - One year parts only.

EXCLUSION OF WARRANTIES

EXCEPT AS PROVIDED ABOVE, GLASTENDER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.

LIMITATION OF REMEDIES AND DAMAGES If Buyer makes a valid and timely claim as outlined above, Glastender’s liability and Buyer’s remedies under this agreement will be limited solely to labor charges authorized and/or replacement or credit, at Glastender’s option, with respect to Products returned at Buyer’s expense within thirty (30) days after warranty repair. GLASTENDER’S LIABILITY WILL IN NO EVENT BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE RETURNED PRODUCTS. GLASTENDER WILL NOT BE LIABLE UNDER ANY CIRCUMSTANCE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, LABOR COSTS EXCEPT AS COVERED UNDER OUR WARRANTY, LOST PROFITS OR THE LOSS OF PERISHABLE PRODUCTS RESULTING FROM THE USE OF OR INABILITY TO USE OUR PRODUCTS OR FROM OUR PRODUCTS’ INCORPORATION INTO OR BECOMING A COMPONENT OF ANY OTHER PRODUCT. NEITHER PARTY WILL HAVE ANY NEGLIGENCE OR OTHER TORT LIABILITY TO THE OTHER, OR TO ANY THIRD PARTY, ARISING FROM ANY BREACH OF THIS AGREEMENT.

GOVERNING LAW - JURISDICTION

The terms and conditions of an order are to be governed and construed according to the laws of the State of Michigan, without regard to conflict of laws principles. Buyer hereby consents to the jurisdiction and venue of the courts located in Saginaw County, Michigan.

No representative, distributor, dealer, or any other person is authorized to modify this warranty. This warranty replaces all other written or verbal warranties.

NOTE: Glastender, Inc.’s policy of constant quality improvement means that prices, specifications, and policies are subject to change without notice. Questions regarding this warranty should be directed to Glastender’s Warranty Administrator.

06-11-15

IMPORTANT!!

Attention Service Companies

Please review the important warranty information on this page. If you believe a service call should be covered by the factory, please call the factory for authorization between 8AM and 5PM EST, Monday through Friday.

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

installation

introDuction

This manual describes the operational features of Vertical Door Coolers. Please review this information before attempting installation and operation.

Long term, trouble-free service will follow if good housekeeping and maintenance procedures are followed. Thank you for selecting Glastender, Inc. products.

utility reQuireMents anD connections

• Electrical: 115 Volt AC, 1 Phase, 60 Hz. A separate 15 Amp circuit is recommended. A 6-foot grounded cord and plug is included with self-contained models.

• Plumbing:

required.

through one of the 3/4 Self-contained Keg Coolers: The drain pain drain is pre-plumbed at the factory to stub out below

the compressor compartment. A field connection to an external drain must be made from that point.

uncrating anD start-uP instructions

All models are shipped in one carton. These steps should be followed:

Self-contained Models: Automatic condensate evaporator is included. No drain connection

Remote Models: An external drain connection is required. Use the ten foot length of 1/2" ID by

5/8" OD plastic tubing provided to run the drain line for condensate. The tubing should exit

side knock-out holes.

1. If legs or casters are included, bolt them to the base with the bolts provided.

2. Unwrap power cord from base if included.

3. Position unit and level and/or seal as required (see page 2 and 3).

4. The evaporator drain pan on remote models must be plumbed to an external drain. All units with draft beer must be plumbed to an external drain (except model KC24 which includes an internal plastic drain bottle). On selfcontained models with draft beer and a factory installed finished top, the beer tower drain pan is plumbed through the cabinet and stubs out in the 3" space below the compressor compartment. Connection to an external drain must be made from that point.

5. Place shelves in desired location.

6. Plug into 115 volt AC outlet if a power cord is included. Remote models require electrical connections to be made by an electrician or remote refrigeration contractor.

7. Load with bottles or cans and allow time for products to cool.

8. Your Glastender equipment is now ready for use.

oPeration

The operating temperature range is 36°F (2°C) to 40°F (5°C).

Self-contained models include an automatic defrost system. The refrigerator will defrost every six hours for approximately 20 minutes. Endwall coolers will defrost every four hours for approximately 15 minutes. During the defrost, the fan inside the cooler will remain on and the refrigeration system will turn off

cleaning instructions

Cleaning is essential to sustaining the integrity of your equipment and preventing corrosion.

ESTIMATED CLEANING TIME: 5 to 10 minutes per unit daily, 45 minutes quarterly

FREQUENCY: Daily cleaning of exterior & door gaskets. Quarterly cleaning of interior, including shelves.

Cleaning Instructions continued on page 4

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

MINIMUM CLEARANCE

installation

1" BASE

Cleaning Instructions continued from page 3

PROCEDURE:

1. A non-chlorine based cleaner or mild detergent and warm water applied with a soft cloth or sponge to all contact sur-

faces.

2. Immediately rinse off cleaning agent(s), using clean warm water, clean soft cloth or sponge.

3. Dry with a soft clean cloth, removing standing water as soon as possible.

NOTES:

1. Never use hydrochloric acid, wire brushes, steel wool, scrapers, or chlorine based cleaners on stainless steel surfaces,

since they will break down the passivity layer and allow corrosion to occur.

2. On stainless steel surfaces, you may use a soft bristle brush or Scotch-Brite® pad for more stubborn stains. Always

scrub with the direction of the grain. Follow with a thorough cleaning as described above.

3. Deposits from food preparation must be properly removed. Even hard water deposits will rust stainless steel, if not

removed.

4. Repeated cleaning may dry up black-vinyl-clad steel (exterior) surfaces of the cooler. Armor All® or similar product

can bring back the shine. Apply the product to a cloth and then rub into the surface, rather than spraying it directly onto the black-vinyl-clad surface.

5. The cooler door gaskets are most often overlooked when cleaning. Failure to clean them regularly will lead to prema-

ture failure, since alcohol and moisture build-up breaks down the gasket material.

sealing Vertical Door cooler to floor

To comply with NSF & health codes, the cooler base must be sealed to the floor using NSF listed sealant. Place a bead of sealant along outer edges of the base and remove excess with disposable towel. The floor sealing procedure does not apply to models that include legs or casters.

Side View of Cabinet

bb24 MiniMuM air floW clearance DiagraM

WARNING:

COMPRESSOR FAILURE DUE

TO RESTRICTION OR

BLOCKAGE OF AIR FLOW WILL

WARRANTY.

VOID

COMPRESSOR

COMPARTMENT

COOLER DOOR

FLOOR

BEAD SEALANT

FOR AIR FLOW

8 1/2"

1 1/2"

24" 21"

AIR FLOW

MAGNETIC GASKET

COOLER CABINET

10"

SWING WILL CONTINUE IF NO CABINET TO IMPEDE

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

Plan View

EVAPORATOR

HOUSING

180° SWING

installation

skin

attention installer: WARNING!!

Failure to level this cooler WILL VOID THE FACTORY WARRANTY. Doors will not close properly causing damage to hinges, handles, and/or gaskets which will adversely affect the refrigeration systems.

COOLER WITH 6" LEGS

cooler installation checKlist

Is the unit evenly and solidly supported, either upon legs, or flat on the base; check for high spots?

COOLER WITHOUT LEGS

If the unit was designed for legs, are they attached?

Is the unit level at the base, from end to end?

Do the doors open and close freely, without touching any other part of the unit in travel?

Are there open holes to the outside of the cabinet which are not plugged or insulated?

Are there obstructions of any kind to air flow into or out of the condensing unit?

Is product tubing or are other lines installed in such a manner to not allow shelf access?

sPecial instructions for Keg coolers

Before you begin:

1. Disassemble the tower into three parts, stiffener, skin, and top plate,

by unscrewing the top two screws.

2. Mount the column stiffener with provided four 1/4"-20x1-1/2" bolts.

3. Install insulation provided into the bottom of the column stiffener.

4. Place the column skin over the stiffener. Run the beer lines through

the hole at the same time.

5. Install insulation provided into the top of the tower assembly.

6. Mount the column top plate to the column stiffener with the two #10-32x1/2" phillips at head s/s machine

screws provided.

7. Apply a bead of silicone sealant around the perimeter of the column. Use your nger to smooth out the bead.

8. Wash tapping device and faucet with detergent and water. Flush beer tapping device and faucet lines.

top plate

stiffener

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

cooler Design change

iMPortant Design change inforMation

In February 2004, Glastender released new BB and ND self contained cooler designs with the evaporator housing moved into an area above the compressor compartment. The serial numbers for these units will be 90000 and above. As of September 2006, KC52, KC72, and KC84 model keg coolers are being manufactured as endwall models. Due to special customer request some BB and ND self contained models may not have the endwall design. Please be sure to verify which cooler design type you are ordering parts for. The term endwall will be used throughout this document to denote parts used for coolers featuring this design.

Standard cooler conguration with evaporator inside cooler area. Compressor compartment

may be located left or right.

Endwall cooler conguration (most BB and ND models manufactured after Feb. 2004, most

KC models manufactured after Sept. 2006) with evaporator located in housing above the compressor compartment. Compressor compartment may be located left or right.

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

electrical anD refrigeration sPecifications

bb24 self-containeD & Kc24 ManufactureD after 4/14/06

electrical refrigerant Pressure P.s.i.g.

115V, 1 phase, 60 Hz tyPe charge high loW

4.0 full load amps, 1/6 HP R134a 5.0 oz. 200 85

Kc24 ManufactureD before 4/14/06

electrical refrigerant Pressure P.s.i.g.

115V, 1 phase, 60 Hz tyPe charge high loW

2.8 full load amps, 1/6 HP R134a 5.0 oz. 200 85

fV24, fV48, anD bb36 self-containeD MoDels ManufactureD before 2/04

electrical refrigerant Pressure P.s.i.g.

115V, 1 phase, 60 Hz tyPe charge high loW

5.1 full load amps, 1/5 HP R22 13.5 oz. 285 144

bb24 reMote, bb48, bb72, bb96, lP48, lP72, lP96, Pt48, Pt72, Pt96

lectrical refrigerant Pressure P.s.i.g.

115V, 1 phase, 60 Hz tyPe charge high loW R22 n/a n/a n/a

lP60,

electrical refrigerant Pressure P.s.i.g.

115V, 1 phase, 60 Hz tyPe charge high loW

8.8 full load amps, 1/3 HP R22 13.5 oz. 285 144

lP84, lP108 & non-enDWall bb60, bb84, bb108, Kc48, Kc72, & Kc84

PT60, PT84

electrical refrigerant Pressure P.s.i.g.

115V, 1 phase, 60 Hz tyPe charge high loW

8.8 full load amps, 1/3 HP R404a 9.0 oz. 285 144

PT108

electrical refrigerant Pressure P.s.i.g.

115V, 1 phase, 60 Hz tyPe charge high loW

8.8 full load amps, 1/3 HP R404a 10.0 oz. 285 144

bb36, bb60, nD52, Kc52 enDWall MoDels

electrical refrigerant Pressure P.s.i.g.

115V, 1 phase, 60 Hz tyPe charge high loW

7.2 full load amps, 1/3 HP R134a *12.0 oz. 186 88

* 12.0 oz. charge Serial #134-106565-F and after. 20.0 oz. charge prior to Serial #134-106565-F.

bb84, bb108, nD72, nD92, Kc72, Kc84 enDWall MoDels

electrical refrigerant Pressure P.s.i.g.

115V, 1 phase, 60 Hz tyPe charge high loW

10.1 full load amps, 1/3 HP R404a 16.0 oz. 331 174

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

Wiring DiagraM for bb36, bb60, nD52, & Kc52 enDWall MoDels

WHITE

LIGHT RECEPTICAL AUX. RECEPTICAL

DEFROST TIMER

BLACK

WHITE

EVAPORATOR FAN

BLUE

WHITE

BLUE

WHITE

THERMOSTAT

ORANGE

MAIN

POWER

SUPPLY

CORD

115v AC

15amp

BLACK

LIGHT SWITCH

BLACK

WHITE

GREEN

CONDENSER FAN

BLACK

COMMON

RUN

COMPRESSOR

START

BLACK

WHITE

OVERLOAD

BLACK

RELAY

STARTER

BLUE

Wiring DiagraM for MoDels bb84, bb108,

nD72, nD92, Kc72, & Kc84 e

nDWall MoDels

2 143

ORANGE

MAIN POWER SUPPLY

CORD

115v AC

15amp

WHITE

LIGHT RECEPTICAL AUX. RECEPTICAL

BLACK

LIGHT SWITCH

BLACK

WHITE

GREEN

CONDENSER FAN

BLACK

COMMON

RUN

COMPRESSOR

START

BLACK

WHITE

OVERLOAD

RELAY

STARTER

BLUE

EVAPORATOR FAN

BLUE

BLACK

DEFROST TIMER

WHITE

2 143

WHITE

BLUE

WHITE

ORANGE

THERMOSTAT

ORANGE

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

Wiring DiagraM for self-containeD lP60, lP84, lP108, Pt60, Pt84, Pt108,

& non enDWall bb36, bb60, bb84, bb108, nD52, nD72, nD92, Kc48, Kc72, Kc84*

*NOTE: See page 7 for endwall BB, ND, and KC self-contained model wiring diagrams

115 VOLT

15 AMP SERVICE RECOMMENDED

LEGEND

B = Black

BL = Blue

W = White O = Orange G = Green

ELECTRICAL RATINGS

All wires are 16 Gauge

Compressor Condenser Fan Motor

Evaporator Fan Motor

Evaporator Assembly

Note: Some Units May Have Two Fans (Three Fans Shown)

7.05 AMP .80 AMP

.28 AMP(Each)

115V 115V

115V

BBL

CONDENSING UNIT

ITEM

DESCRIPTION

EVAPORATOR FAN BLADE

EVAPORATOR FAN MOTOR

LIGHT SWITCH3

CABINET LIGHT RECEPTACLE

THERMOSTAT

DEFROST TIMER

OVERLOAD

CAPACITOR

COMPRESSOR

START RELAY

CONDENSER FAN MOTOR

CONDENSER FAN BLADE

BALLAST13

TOMBSTONE

STARTER

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

Wiring DiagraM for reMote coolers incluDing MoDels

bb24, bb48, bb72, bb96, lP48, lP72, lP96, Pt48, Pt72, Pt96

Evaporator Assembly

Note: Some Units May Have Two Fans (Three Fans Shown)

115V

BLBL

TO LIGHTS

ITEM

3 LIGHT SWITCH

5 DEFROST TIMER

DESCRIPTION

EVAPORATOR FAN BLADE

EVAPORATOR FAN MOTOR

THERMOSTAT

LEGEND

BK = Black

BL = Blue

W = White O = Orange G = Green R = Red Y = Yellow Y/BL = Yellow w/blue stripe Y/R = Yellow

w/red stripe

NEUTRAL

CONDENSING

REMOTE

UNIT

ELECTRICAL RATINGS

All wires are 16 Gauge

Evaporator Fan Motor

115V

.28 AMP(Each)

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

Wiring DiagraM for reMote coolers With solenoiD for

Evaporator Assembly

Evaporator Fan Motor

FLOURESCENT LIGHT SYSTEM

nstalling More than one unit on one conDensing unit

Note: Some Units May Have Two Fans (Three Fans Shown)

BLBL

TO LIGHTS

ITEM

3 LIGHT SWITCH

5 DEFROST TIMER

DESCRIPTION

EVAPORATOR FAN BLADE

EVAPORATOR FAN MOTOR

THERMOSTAT

ELECTRICAL RATINGS

All wires are 16 Gauge

115V

.28 AMP(Each)

Wiring DiagraM for MoDels after 2/15/00

FLOURESCENT LIGHT SYSTEM

TWO LIGHT

115V

NEUTRAL

With fluorescent light systeM

ONE LIGHT

LEGEND

BK = Black

BL = Blue

W = White O = Orange

G = Green R = Red Y = Yellow Y/BL = Yellow w/blue stripe Y/R = Yellow w/red stripe

115V

BALLAST

Y/BL

LIGHT

Y/R

LIGHT

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

115V

BALLAST

STARTER

LIGHT

Wiring DiagraM for bb24 self-containeD & Kc24 after 4/14/06

120 VOLTS

POWER CORD

THERMOSTAT

ALL WIRE 16GA.

START RELAY

COMPRESSOR

EVAPORATOR

FAN

MOTOR

OVERLOAD

CONDENSER

FAN

MOTOR

TOTAL .1 AMPS

Kc24 before 4/14/06 Wiring DiagraM

120 VOLTS POWER CORD

START RELAY

FAN

TOWER

COOLING

MOTOR

COMPRESSOR

ELECTRICAL RATINGS COMPRESSOR, 2.7 AMPS

OVERLOAD

THERMOSTAT

ALL WIRE 16GA.

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

bb24 self-containeD & Kc24 coMPressor, conDenser anD relateD Parts

Part no. olD Part no. DescriPtion Price

1. 06008990 1/10 HP Embraco compressor, R134a $390.00

06009280 Start capacitor for 1/10 HP Embraco compressor 21.00

2. 06001647 GT-034101 Relay for 1/6 HP Aspera R134a compressor 15.00 06009279 Relay for 1/10 HP Embraco compressor 15.00

3. 06001341 GT-031200 Overload protector for 1/6 HP Aspera R134a compressor 15.00 06009287 Overload protector for 1/10 HP Embroac compressor 15.00

4. 06001397 GT-033000 Automatic defrost timer 32.00

5. 06001694 GT-035131 Condenser fan motor 35.00

6. 09000298 GT-032804 Condenser fan motor blade 5.00 06001125 GT-032315 Beer tower cooling fan shroud (KC24 models 05/01 - 04/14/06) 17.00 06001452 GT-035128 Beer Tower Cooling Fan Motor (KC24 models 05/01 - 04/14/06) 65.00 06001396 GT-032809 Exterior blade assembly (KC24 models 05/01 - 04/14/06) 10.00 06001395 GT-032802 Interior blade assembly (KC24 models 05/01 - 04/14/06) 5.00

7. 07000133 GT-031513 Condenser fan motor mounting bracket 20.00

8. 04000100 GT-032608 Condenser coil (7" L, 6-7/8" H, 2-1/2" W) 130.00 06001389 GT-032611 Static condenser coil (KC24 before 04/14/06) 125.00

9. 06004028 Filter dryer with service port 25.00

10. 06000176 GT-038000 Condensate pan 42.00

11. 07000234 Wicking material 24.00 05000644 Wicking Material (KC24 before 04/14/06) 10.00

12. 04000124 GT-032509 Cap tube 96" X .036 20.00

13. 06001405 GT-033202 Thermostat with knob and plate [Selco] 50.00

14. 06001632 GT-038419 Knob only 3.00

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

stanDarD bb36 coMPressor anD conDenser relateD Parts

Part no. olD Part no. DescriPtion Price

1. 11000082 GT-035005 1/5 HP Aspera compressor, R22 $535.00

2. 06001379 GT-032201 Start capacitor for 1/5 HP Aspera R22 compressor 20.00

3. 08000083 GT-034107 Relay for 1/5 HP Aspera R22 compressor 15.00

4. 08000069 GT-031204 Overload protector for 1/5 HP Aspera R22 compressor 15.00 06001444 GT-035027 1/5 HP Tecumseh compressor, R22 (after 4/00) 490.00 06001382 GT-032211 Start capacitor for 1/5 HP Tecumseh R22 compressor 25.00 06001415 GT-034117 Relay for 1/5 HP Tecumseh R22 compressor 19.00 06001303 GT-031212 Overload protector for 1/5 HP Tecumseh R22 compressor 10.00

5. 08000085 GT-035106 Condenser fan motor, 16W 135.00

6. 08000081 GT-032801 Condenser fan motor blade assembly 15.00

7. 06001321 GT-031515 Condenser fan motor mounting bracket 5.00

8. 08000076 GT-032601 Condenser coil (10"L x 7-15/16"W x 4”D) 220.00

9. 08000075 GT-032307 Fan shroud, condenser 11.00

10. 06004028 Filter dryer with service port 25.00

11. 06001648 GT-038001 Condensate pan (13-3/4"L x 9-1/2"W x 1"D) 58.00

12. 07000234 GT-038201 Wicking material (2 required) 24.00

13. 06001461 Elbow, white nylon, 1/2" x 1/2" 2.00

14. 06001345 GT-031716 Tubing, drain, clear plastic, 1/2" ID x 5/8" OD, per foot 1.45

15. 08000074 GT-031532 Base, condensing unit 30.00

16. 06001397 GT-033000 Automatic defrost timer, 6hr. 32.00

17. 06001313 GT-031400 Condensing unit power cord 20.00 11000120 GT-031717 Cap tube 60" X .036 20.00

18. 06001384 GT-032501 Accumulator, suction line 40.00

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

coMPressor anD conDenser relateD Parts for lP60, lP84, lP108,

& non enDWall bb60, bb84, bb108, nD52, nD72, nD92, Kc72, anD Kc84

Part no. olD Part no. DescriPtion Price

1. 07000172 GT-035002 1/3 HP Aspera compressor, R22 $500.00

2. 06001379 GT-032201 Start capacitor for 1/3 Aspera HP R22 compressor 20.00

3. 06001414 GT-034103 Relay for 1/3 HP Aspera R22 compressor 14.00

4. 08000068 GT-031202 Overload protector for 1/3 HP Aspera R22 compressor 12.00 06001443 GT-035025 1/3 HP Tecumseh compressor, R22 (after 2/00) 400.00 06001380 GT-032206 Start capacitor for 1/3 HP Tecumseh R22 compressor 20.00 07000168 GT-034112 Relay for 1/3 HP Tecumseh R22 compressor 18.00 07000128 GT-031207 Overload protector for 1/3 HP Tecumseh R22 compressor 12.00

5. 08000085 GT-035106 Condenser fan motor 135.00

6. 08000081 GT-032801 Condenser fan motor blade assembly 15.00

7. 06001321 GT-031515 Condenser fan motor mounting bracket 5.00

8. 08000076 GT-032601 Condenser coil (10"L x 7-15/16"W x 4"D) 220.00

9. 08000075 GT-032307 Fan shroud, condenser 11.00

10. 06004028 Filter dryer with service port 25.00

11. 06001648 GT-038001 Condensate pan (13-3/4"L x 9-1/2"W x 1"D) 58.00

12. 07000234 GT-038201 Wicking material (2 required) 24.00

13. 06001461 Elbow, white nylon, 1/2" x 1/2" 2.00

14. 06001345 GT-031716 Tubing, drain, clear plastic, 1/2" ID x 5/8" OD, per foot 1.45

15. 08000074 GT-031532 Base, condensing unit 30.00

16. 06001397 GT-033000 Automatic defrost timer, 6hr. 32.00

17. 06001313 GT-031400 Condensing unit power cord 20.00 06001614 GT-032510 Cap tube 110" X .054 20.00

18. 06001384 GT-032501 Accumulator, suction line 40.00

1/3 HP, R22

(BB60, BB84, BB108, ND52, ND72, LP60,

LP84, LP108, KC72, KC84)

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

bb36, bb60, nD52, & Kc52* coMPressor anD conDenser

relateD Parts for enDWall MoDels

Part no. olD Part no. DescriPtion Price

1. 06001439 GT-035014 1/3 HP Tecumseh compressor, R134a $435.00

2. 09000481 GT-032210 Start capacitor for 1/3 HP Tecumseh R134a compressor 10.00

3. 09000479 GT-034114 Relay for 1/3 HP Tecumseh R134a compressor 20.00

4. 09000480 GT-031211 Overload protector for 1/3 HP Tecumseh R134a compressor 11.50

5. 06001449 GT-035114 Condenser fan motor 100.00

6. 08000081 GT-032801 Condenser fan blade assembly 15.00

7. 06001319 GT-031512 Condenser fan motor mounting bracket 5.00

8. 08000076 GT-032601 Condenser coil 220.00

9. 08000075 GT-032307 Fan shroud, condenser 11.00

10. 06004028 Filter dryer with service port 25.00

11. 06000155 Condensate pan 48.00

12. 07000234 Wicking material 24.00

13. 06001350 GT-031732 Tubing, drain, clear plastic, per foot, 3/4" ID 3.50

14. 06000845 GT-031539 Base, condensing unit 22.00

15. 06001615 GT-033013 Automatic defrost timer 4hr. 32.00

16. 06001313 GT-031400 Condensing unit power cord 20.00 06001673 GT-031809 Capillary tubing 48" X 0.036" (prior to Serial #134-106565-F) 10.00 09000527 Capillary tubing 65" X 0.049" (Serial #134-106565-F and after) 20.00

17. 06001384 GT-032501 Accumulator, suction line 40.00

* KC52 production began with serial number 134099618N.

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

bb84, bb108, nD72, nD92, Kc72*, & Kc84* coMPressor

anD conDenser relateD Parts for enDWall MoDels

Part no. olD Part no. DescriPtion Price

1. 07000173 GT-035008 1/3 HP Embraco compressor, R404a $450.00

2. 07000151 GT-032203 Start capacitor for 1/3 HP Embraco R404a compressor 25.00

3. 06001675 GT-034103 Relay for 1/3 HP Embraco R404a compressor 15.00

4. 07000127 GT-031205 Overload protector for 1/3 HP Embraco R404a compressor 15.00

5. 08000085 GT-035106 Condenser fan motor 135.00

6. 08000081 GT-032801 Condenser fan blade assembly 15.00

7. 06001319 GT-031512 Condenser fan motor mounting bracket 5.00

8. 06001393 GT-032619 Condenser coil 230.00

9. 08000075 GT-032307 Fan shroud, condenser 11.00

10. 06004028 Filter dryer with service port 25.00

11. 06000155 Condensate pan 48.00

12. 07000234 Wicking material 24.00

13. 06001350 GT-031732 Tubing, drain, clear plastic, 3/4" dia, per foot 3.50

14. 06000845 GT-031539 Base, condensing unit 22.00

15. 06001615 GT-033013 Automatic defrost timer 4hr. 32.00

16. 06001313 GT-031400 Condensing unit power cord 20.00 06001676 GT-031810 Cap tube 84" x .049 20.00

17. 06001384 GT-032501 Accumulator, suction line 40.00

*KC72 Endwall conguration production began with serial number 404103097N. *KC84 Endwall configuration production began with serial number 404103109N.

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

coMPressor anD conDenser relateD Parts for Kc48

Part no. olD Part no. DescriPtion Price

1. 07000172 GT-035002 1/3 HP Aspera compressor, R22 $500.00

2. 06001379 GT-032201 Start capacitor for 1/3 HP Aspera R22 compressor 20.00

3. 06001414 GT-034103 Relay for 1/3 HP Aspera R22 compressor 14.00

4. 08000068 GT-031202 Overload protector for 1/3 HP Aspera R22 compressor 12.00 06001443 GT-035025 1/3 HP Tecumseh compressor, R22 (same models, after 2/00) 400.00 06001380 GT-032206 Start capacitor for 1/3 HP Tecumseh R22 compressor 20.00 07000168 GT-034112 Relay for 1/3 HP Tecumseh R22 compressor 16.00 07000128 GT-031207 Overload protector for 1/3 HP Tecumseh R22 compressor 12.00

5. 08000085 GT-035106 Condenser fan motor, 16W 135.00

6. 09000299 GT-032805 Condenser fan blade 10.50

7. 06000586 Condenser fan motor mounting bracket 9.00

8. 06001392 GT-032618 Condenser coil (19"L x 7"W x 3-1/2"D) 175.00

9. 06000405 Fan shroud, condenser (prior to 9/6/06) 11.00 06002853 Housing, condenser fan, 8" models (after 9/6/06) 11.00 06002854 Bracket, condenser fan, top, 8" models (after 9/6/06) 6.00 06002855 Bracket, condenser fan, bottom, 8" models (after 9/6/06) 6.00

10. 06004028 Filter dryer with service port 25.00

11. 06001651 GT-038024 Condensate pan (7-7/8"L x 7-1/2"W x 1-1/2"D) 42.00

12. 07000234 Wicking material 24.00

13. 06001461 Elbow, white nylon, 1/2" x 1/2" 2.00

14. 06001345 GT-031716 Tubing, drain, clear plastic, 1/2" ID x 5/8" OD, per foot 1.45

15. 06001397 GT-033000 Automatic defrost timer 6hr. 32.00

16. 06001313 GT-031400 Condensing unit power cord 20.00 06001614 GT-032510 Cap tube 110" X .054 20.00

17. 06001384 GT-032501 Accumulator, suction line 40.00

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

coMPressor anD conDenser relateD Parts for

Pt60, Pt84,

Part no. olD Part no. DescriPtion Price

1. 07000173 GT-035008 1/3 HP Aspera compressor, R404a $450.00

2. 07000151 GT-032203 Start capacitor for 1/3 HP Aspera R404a compressor 25.00

3. 06001675 GT-034115 Relay for 1/3 HP Aspera R404a compressor 15.00

4. 07000127 GT-031205 Overload protector for 1/3 HP Aspera R404a compressor 15.00 07000175 GT-035026 1/3 HP Tecumseh compressor, R404a (after 1/00) 375.00 06001380 GT-032206 Start capacitor for 1/3 HP R404a Tecumseh compressor 20.00 07000168 GT-034112 Relay for 1/3 HP R404a Tecumseh compressor 16.00 07000128 GT-031207 Overload protector for 1/3 HP R404a Tecumseh compressor 12.00

5. 08000085 GT-035106 Condenser fan motor 135.00

6. 08000081 GT-032801 Condenser fan motor blade assembly 15.00

7. 06001319 GT-031512 Condenser fan motor mounting bracket 5.00

8. 08000076 GT-032601 Condenser coil (10"L x 7-15/16"W x 4"D) 220.00

9. 08000075 GT-032307 Fan shroud, condenser 11.00

10. 06004028 Filter dryer with service port 25.00

11. 06001648 GT-038001 Condensate pan (13-3/4"L x 9-1/2"W x 1"D) 58.00

12. 07000234 GT-038201 Wicking material (2 required) 24.00

13. 06001461 Elbow, white nylon, 1/2" x 1/2" 2.00

14. 06001345 GT-031716 Tubing, drain, clear plastic, 1/2" ID x 5/8" OD, per foot 1.45

15. 08000074 GT-031532 Base, condensing unit 30.00

16. 06001397 GT-033000 Automatic defrost timer 6hr. 32.00

17. 06001313 GT-031400 Condensing unit power cord 20.00 06001614 GT-032510 Cap tube 110" X .054 20.00 06001384 GT-032501 Accumulator, suction line 40.00

anD Pt108

1/3 HP, R404A

(PT60, PT84 and PT108)

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

coMPressor anD conDenser relateD Parts for fV24 anD fV48

Part no. DescriPtion Price

1. 11000082 1/5 HP Aspera compressor, R22 (before 04/00) $535.00 06001444 1/5 HP Tecumseh compressor, R22 (after 04/00 and before 01/01/10) 490.00 11000084 Compressor, 1/4hp, 120V, Tecumseh model AEA4430YXA (after 01/01/10) 390.00

2. 06001379 Start capacitor for 1/5HP Aspera R22 compressor (before 04/00) 20.00 06001382 Start Capacitor, compressor, 1/4hp 134a & 1/5hp R22, 120V 25.00 Tecumseh model AEA4430YXA (after 04/00)

3. 06001675 Relay for 1/5 HP Aspera R22 compressor (before 04/00) 15.00 06001415 Relay, compressor, 1/4hp R134a & 1/5hp R22 (after 04/00) 19.00

4. 08000069 Overload protector for 1/5 HP Aspera R22 compressor (before 04/00) 15.00 06001303 Overload protector, 1/4hp 134a & 1/5hp R22, 120V, Compressor, model 10.00 AEA4430YXA & AEA9415EXA (after 04/00)

5. 07000152 Fan shroud, condenser 15.00

6. 06001449 Condenser fan motor, 6W 100.00

7. 07000155 Condenser fan motor blade 12.00

8. 06001321 Condenser fan motor mounting bracket 5.00

9. 08000078 Condenser coil (13"L x 8-1/4"W x 2-1/2"D) 145.00

10. 06004028 Filter dryer with service port 25.00

11. 08000125 Condensate pan (17"L x 3-7/8"W x 1-1/2"D), FV24 60.00

12. 07000234 Wicking material (2 required for the FV48) 24.00 07000260 Condensate pan, FV48 65.00

13. 06001461 Elbow, white nylon, 1/2" x 1/2" 2.00

14. 06001345 Tubing, drain, clear plastic, 1/2" ID x 5/8" OD, per foot 1.45

15. 06001397 Automatic defrost timer 6hr. 32.00

16. 06001313 Condensing unit power cord 20.00 11000120 Cap tube 60" X .036" (before 01/01/10) 20.00 06001359 Cap tube .049", per foot, 110" required (after 01/01/10) 2.00 06001384 Accumulator, suction line 40.00

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

eVaPorators anD relateD Parts

Part no. olD Part no. DescriPtion Price

1. 06002423 GT-034304 Expansion valve, remote model, R22 refrigerant $115.00 06001416 GT-034309 Expansion valve, remote model, R134a refrigerant 120.00 06001417 GT-034311 Expansion valve, remote model, R404a refrigerant 130.00

2. 06001385 GT-032502 Filter dryer for remote coolers 20.00

3. 06001405 GT-033202 Thermostat with knob and plate [Selco] 50.00

4. 06001632 GT-038419 Knob only 3.00

5. 06001431 GT-034935 Rope lighting, replacement kit, for BB24, BB36 41.00 06001432 GT-034936 Rope lighting, replacement kit, for BB60, ND48, ND52, LPT36 61.00 06001433 GT-034937 Rope lighting, replacement kit, for BB84, ND72 81.00 06001434 GT-034938 Rope lighting, replacement kit, for BB108 101.00

6. 06001419 GT-034905 Light, fluorescent, plug-in 25.00

7. 01000549 GT-033400 Switch (prior to 9/04) 18.00 06001412 GT-033421 Switch 5.00

8. 06000888 GT-033310 Electrical Outlet, black (Triboro with no ground) 7.50 06001409 GT-033304 Receptacle, snap in with ground 5.00

9. 06001589 GT-041308 Solenoid valve, remote cooler 85.00

10. 06001590 GT-041309 Solenoid Coil, 120V, remote cooler 50.00

11. 06001553 GT-038420 Thermometer 6.00

12. 06001424 GT-034925 Light bulb cover. clear plastic 10.00

13. 08000286 Light socket with wire lead, set of 2 4.00

14. 06001425 GT-034926 Light bulb, GE# F6T5 13.00 06001426 GT-034927 Ballast for one light evaporator housing 30.00 06004141 Kit, fluorescent light conversion, replaces single ballast for dual light systems 125.00 06001427 GT-034928 Ballast for two light evaporator housing 60.00 06001421 GT-034912 Starter base, fluorescent light 7.00 06001420 GT-034911 Starter, fluorescent light, 4-6-8 watt 5.00 12000089 GT-034908 Light bulb, fluorescent, 36" long, T12 (prior to 08-07) 13.50 06001423 GT-034917 Ballast, 120V, 2 lamp, rapid start (use with 12000089) 76.00 12000326 Bulb, Fluorescent 36", 25W T8 (after 08-07) 14.00 12000323 Ballast, 32W T8 (use with 12000326) 76.00 12000530 Lamp holder, Fluorescent light, set of 2 9.50

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

eVaPorators anD relateD Parts

Blower Motor Assembly

Endwall BB84, BB108,

ND72, ND92, KC52, KC72*, KC84

*KC72 Note: Prior to SN 404143273N

Mf’d 4-11-2013

06001387

Evaporator Coil for

BB24 Self-contained , KC24

(8" L, 4-1/8" H, 3-1/2" W)

06001390

Evaporator Coil for

BB24 Remote, BB36, LP48,

LP60, PT48, FV24, FV48

(18-3/4" L, 2-5/8" H, 4" W)

Evaporator Fan Replacement Parts

Endwall BB36, BB60, ND52, All Non Endwall Models, and

KC72 SN 404143273N Mf’d 4-11-2013 and later

06001893

Evaporator Coil for

Endwall Models

BB36, BB60, BB84, BB108,

ND52, ND72, ND92, KC52, KC72, KC84

(16" L, 6" H, 4" W)

06001391

Evaporator Coil for

LP72, LP84, LP96, LP108,

PT72, PT84, PT96, PT108

(39-1/4" L, 2-5/8" H, 4" W)

06000174

Drain Pan for BB24 Self-contained, KC24

(8-1/2" L, 3-7/8" H, 1" W)

06003683

Evaporator Drain Pan, Left, for Endwall Models

BB36, BB60, BB84, BB108,

ND52, ND72, ND92,

KC52, KC72, and KC84

(19-1/8" L, 5" H, 1/2" W)

Drain Pan Assembly for Non Endwall Models

BB48, BB60, BB72, BB84,

ND52, ND72, KC48, KC72, KC84

(28-5/8" L, 2-5/8" H, 3/4" W)

Drain Pan for BB96, BB108 (39-1/2" L, 2-5/8" H, 3/4" W)

(20-3/8" L, 4-3/4" H, 1" W)

06005361

06000481

06000620

Drain Pan for PT48

06001386

Evaporator Coil for

Non Endwall Models

BB48, BB60, BB72, BB84,

ND48, ND40, ND52, ND60 ND72,

KC48, KC72, KC84

(27-1/2" L, 4" H, 1-7/8" W)

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

Evaporator Coil for

BB96, BB108, ND80

(38-1/2" L, 4" H, 1-7/8" W)

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

08000077

Drain Pan for PT72, PT84, PT96, PT108

06000607

(41-1/8" L, 4-3/4" H, 1" W)

06000613

Drain Pan for BB24 Remote, BB36, LP48, LP60

(20-3/8" L, 4-3/4" H, 1" W)

06000632

Drain Pan for LP72, LP84, LP96, LP108

(41-1/8" L, 4-3/4" H, 1" W)

eVaPorators anD relateD Parts

Part no. olD Part no. DescriPtion Price

1. 06001453 GT-035129 Blower motor assembly (Endwall BB84, BB108, ND72, ND92, $225.00 KC52, KC72, KC84)

2. 06001383 GT-032301 Evaporator fan guard (Endwall BB36, BB60, ND52 & All Non Endwall Models) 12.00

3. 06001395 GT-032802 Evaporator fan motor blade, white plastic (All Non Endwall Models) 5.00

4. 06001445 GT-035107 Evaporator fan motor (Endwall BB36, BB60, ND52 & All Non Endwall Models) 45.00

5. 07000310 GT-031514 Evaporator fan motor mounting bracket (Endwall BB36, BB60, ND52 14.00 & All Non Endwall Models)

6. 06001387 GT-032605 Evaporator coil (BB24 Self-contained, KC24) 135.00

7. 06001893 Evaporator coil (Endwall Models BB36, BB60, BB84, BB108, 210.00 ND52, ND72, ND92, KC52, KC72, KC84) (after 3/06) 06003051 Evaporator coil replacement kit (BB36, BB60, BB84, 220.00 BB108, ND52, ND72, ND92 Endwall Models) (prior to 3/06) It is also necessary to purchase a drain pan, 06003684 or 06003683

8. 06001390 GT-032612 Evaporator coil (BB24 Remote, BB36, LP48, LP60, PT48, FV24, FV48) 220.00 06001394 GT-032628 Evaporator coil (PT60) 320.00

9. 06001391 GT-032613 Evaporator coil (LP72, LP84, LP96, LP108, PT84, PT96, PT108) 310.00

10. 06001386 GT-032603 Evaporator coil (Non Endwall Models, BB48, BB60, BB72, BB84, 170.00 ND40, ND48, ND52, ND60 ND72, KC48, KC72, KC84)

11. 08000077 GT-032604 Evaporator coil (BB96, BB108, ND80) 285.00

12. 06001110 TXV valve extension Cover (3 door remote coolers) 12.00

13. 06001111 TXV valve extension Cover (4 door remote coolers) 12.00

14. 06001105 TXV valve Cover (all remote coolers) 12.00 15 06000174 GT-038002 Evaporator drain pan (BB24 Self-contained, KC24) 48.00 06000618 Evaporator drain pan (KC24) (prior to 04/14/06) 54.00

16. 06003684 Evaporator drain pan, Right (Endwall Models BB36, BB60, BB84, 60.00 BB108, ND52, ND72, ND92, KC52, KC72, KC84) (after 3/06) 06003683 Evaporator drain pan, Left (Endwall Models BB36, BB60, BB84, 60.00 BB108, ND52, ND72, ND92, KC52, KC72, KC84) (after 3/06) 06000844 GT-038027 Evaporator drain pan (Endwall Models BB36, BB60, BB84, 60.00 BB108, ND52, ND72, ND92) (prior to 3/06)

17. 06005361 Drain pan assembly , evaporator, 2 fan, remote (Non Endwall Models, 54.00 BB48, BB60, BB72, BB84, ND52, ND72, KC48, KC72, KC84)

18. 06000481 GT-038004 Evaporator drain pan (BB96, BB108) 60.00 06001185 Evaporator drain pan (PT60) 54.00

19. 06000620 Evaporator drain pan (PT48) 54.00

20. 06000607 GT-038018 Evaporator drain pan (PT72, PT84, PT96, PT108) 60.00

21. 06000613 GT-038019 Evaporator drain pan (BB24 Remote, BB36, LP48, LP60) 54.00

22. 06000632 GT-038020 Evaporator drain pan (LP72, LP84, LP96, LP108) 60.00 06000663 Evaporator drain pan (FV24, FV48) 54.00 06004182 Assembly, shroud, evaporator, 2-fan, 1-2 door e/w, 110 Volt 180.00 06004188 Assembly, shroud, evaporator, 2-fan, 1-2 door e/w, 110 Volt, digital t-stat 150.00

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

Doors anD relateD Parts

Part no. olD Part no. DescriPtion Price

1. 06001462 GT-035402 Door handle, stainless $60.00 06001653 GT-035401 Door handle, brass 110.00 06001899 Door handle, tab style, glass door, right (Prior to 2003) 65.00 06003704 Door handle, tab style, glass door, left (Prior to 2003) 65.00

2. 06001536 GT-036602 Door lock, stainless 36.00 06004009 Key, #806, for stainless cooler door lock (06001536) 4.00 06001535 GT-036601 Door lock, brass 43.00 06004010 Key, #606, for brass cooler door lock (06001535) 4.00 06001677 GT-035406 Plug for door handle, stainless 1.00 06001678 GT-035408 Plug for door handle, brass 1.00 00000200 GT-038733 Screws for top of handle, stainless (set of 2), 10/32 x 1" PFH Machine Screw 1.00 00000016 GT-038779 Screws for top of handle, brass (set of 2), 10/32 x 5/8" PFH Machine Screw 1.00 00000046 GT-038759 Screw for bottom of handle, stainless, and screws for old style brackets .50 00000043 GT-038748 Screw for bottom of handle, black .50

3. 11000076 GT-032114 Hinge set, 120º swing, set of two w/screws and washers 25.00

4. 06002510 GT-032101 Hinge set, 180º swing, set of two (prior to 1/99 - w/ screws and washers) 25.00

5. 06001616 GT-032115 Hinge bracket, bottom, left (prior to 1/99 - w/ 2 screws) 15.00 06001617 GT-032116 Hinge bracket, bottom, right (prior to 1/99 - w/ 2 screws) 15.00

6. 06001372 GT-032120 Hinge set and brackets, 180º swing, left (complete with screws) 35.00

7. 06001373 GT-032121 Hinge set and brackets, 180º swing, right (complete with screws) 35.00

8. 06001322 GT-031543 Lock bracket 10.00 06001376 GT-032130 Hinge set & brackets for wood doors, 180º swing, left (complete with screws) 45.00 06001377 GT-032131 Hinge set & brackets for wood doors, 180º swing, right (complete with screws) 45.00 06001378 GT-032135 Lock bracket for wood doors 10.00

9. 06001304 GT-031307 Cooler door gasket, push-in style, black, 23-1/2" x 32-1/2" OD 42.00 06001305 GT-031308 Cooler door gasket, 06001307 GT-031317 Cooler door gasket, LP and FV models, black, 23½" x 26½" OD 42.00 06001309 GT-031323 Cooler door gasket, narrow door, black, 19½" x 32½" OD 42.00

10. 00000067 GT-038813 Screw for door hinges (4 required) .50

11. 00000041 GT-038746 Bolts for brackets (6 required) .50

12. 06000140 Hinge rail, bottom, front vent coolers (2 - 06001485 washers required, not 20.00 included) 06001485 GT-036012 Plastic washer for hinge 1.00 06001569 GT-038495 Bushing for hinge (gray) 1.00 06001844 Standard laminated door trim rail kit 35.00 06001846 Laminated door trim rail kit, for narrow doors 35.00 06001847 Laminated door trim rail kit, for low profile narrow doors 35.00 06001845 Laminated door trim rail kit, for low profile doors 35.00

screw-on style (wooden doors before 6/9/90) 23½" x 32½" OD

42.00

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

Doors anD relateD Parts

rePlaceMent Doors for units ManufactureD Prior to January 1999

rePlaceMent Doors for bb, Pt, rf, Ds, Kc72, anD Kc84 MoDels

Part no. olD Part no. DescriPtion Price

06001489 GT-036208 Black vinyl clad door (prior to 1/99) $308.00 06001487 GT-036205 Unlaminated door (prior to 1/99) 308.00 06001488 GT-036207 Laminated door (prior to 1/99) 428.00 06001490 GT-036209 Stainless door (prior to 1/99) 358.00 06007221 Glass door, black (prior to 1/99) 598.00 06007222 Glass door, stainless (prior to 1/99) 648.00

rePlaceMent Doors for lP anD fV MoDels

06001505 GT-036267 Black vinyl clad door, low profile (prior to 1/99) 308.00 06001506 GT-036268 Unlaminated door, low profile (prior to 1/99) 308.00 06001507 GT-036269 Laminated door, low profile (prior to 1/99) 428.00 06001508 GT-036270 Stainless door, low profile (prior to 1/99) 358.00 06007226 Glass door, low profile, black (prior to 1/99) 598.00 06007225 Glass door, low profile, stainless (prior to 1/99) 648.00

rePlaceMent Doors for nD MoDels

06001511 GT-036273 Black vinyl clad door, narrow (prior to 1/99) 308.00 06001512 GT-036274 Unlaminated door, narrow (prior to 1/99) 308.00 06001513 GT-036275 Laminated door, narrow (prior to 1/99) 428.00 06001514 GT-036276 Stainless door, narrow (prior to 1/99) 358.00 06007224 Glass door, narrow , black (prior to 1/99) 598.00 06007223 Glass door, narrow, stainless (prior to 1/99) 648.00

NOTE: Door gaskets, handles and hinges are sold separately, see page 26 for part numbers

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

Doors anD relateD Parts

rePlaceMent Doors for units ManufactureD January 1999 anD after

rePlaceMent Doors for bb, Pt, rf, Ds, anD Kc MoDels

Part no. olD Part no. DescriPtion Price

06001517 GT-036280 Black vinyl clad door $308.00 06001518 GT-036281 Unlaminated door 308.00 06001519 GT-036282 Laminated door 428.00

1. 06001520 GT-036283 Stainless door 358.00 06001597 Glass door, black 598.00 06001596 Glass door, stainless 648.00

rePlaceMent Doors for lP anD fV MoDels

2. 06001523 GT-036286 Black vinyl clad door, low profile 308.00 06001524 GT-036287 Unlaminated door, low profile 308.00 06001525 GT-036288 Laminated door, low profile 428.00 06001526 GT-036289 Stainless door, low profile 358.00 06001600 Glass door, low profile, black 598.00

3. 06001599 Glass door, low profile, stainless 648.00

rePlaceMent Doors for nD MoDels

06001529 GT-036292 Black vinyl clad door, narrow 308.00 06001530 GT-036293 Unlaminated door, narrow 308.00

4. 06001531 GT-036294 Laminated door, narrow 428.00 06001532 GT-036295 Stainless door, narrow 358.00 06001603 Glass door, narrow, black 598.00 06001602 Glass door, narrow, stainless 648.00

NOTE: Door gaskets, handles and hinges are sold separately, see page 26 for part numbers

/16

27 ½

/16

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

Doors anD relateD Parts

rePlaceMent glass Doors for units ManufactureD sePteMber 2003 anD after

NOTICE: In September of 2003, we released new style glass doors for our vertical door coolers. These

new style doors t all of our units manufactured AFTER January 1999, However these new style glass

doors look different than the glass doors manufactured BETWEEN January 1999 and September 2003. Please consider this fact if you need to match the look of your replacement glass door with that of existing glass doors. If you need to order the style of glass doors manufactured between January 1999 and September 2003, please refer to page 25.

rePlaceMent Doors for bb, Pt, rf, Ds, anD Kc MoDels

Part no. olD Part no. DescriPtion Price 06001596 GT-042000 Stainless Steel Glass Door $648.00 06001597 GT-042001 Black Vinyl Clad Glass Door 598.00

15. 06001598 GT-042002 Laminated Glass Door 718.00

rePlaceMent Doors for lP anD fV MoDels

Part no. olD Part no. DescriPtion Price

16. 06001599 GT-042010 Stainless Steel Glass Door 648.00 06001600 GT-042011 Black Vinyl Clad Glass Door 598.00 06001601 GT-042012 Laminated Glass Door 718.00

rePlaceMent Doors for nD MoDels

Part no. olD Part no. DescriPtion Price

06001602 GT-042020 Stainless Steel Glass Door 648.00

17. 06001603 GT-042021 Black Vinyl Clad Glass Door 598.00 06001604 GT-042022 Laminated Glass Door 718.00

NOTE: Door gaskets, handles, and hinges are sold separately, see page 26 for part numbers

33 3/8"

23 5/8"

33 3/8"

27 1/2"

19 5/8"

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

shelVing, racKs anD relateD Parts

Part no. olD Part no. DescriPtion Price

1. 06001399 GT-033101 18⅞" x 20⅛" grey coated shelf (fits BB24, BB36, FV24, $77.00 ND72 middle door and refrig. end of remote PT models)

2. 06001400 GT-033102 18⅞" x 22-1/16" grey coated shelf with corner notch (fits end 77.00 doors on BB, and LP models and both doors on FV48) 06001401 GT-033103 18⅞" x 23⅞" grey coated shelf (fits middle doors on BB, LP, 77.00 PT and RF models) 06001402 GT-033125 18⅞" x 18-1/16" grey coated shelf (fits end doors on ND models) 77.00 06001403 GT-033127 18⅞" x 22-1/16" grey coated shelf (fits end doors on PT and RF models) 77.00 06003971 18⅞" x 22-1/16" grey coated shelf (fits NDPT48 and 72 coolers) 77.00 06001404 Shelf divider 25.00 06001278 Floor, stainless, fits BGS-18 104.00 06001279 Floor, stainless, fits BGS-24 137.00 06001280 Floor, stainless, fits BGS-30 169.00 06001281 Shelf, stainless, fits BGS-18 104.00 06001282 Shelf, stainless, fits BGS-24 137.00 06001283 Shelf, stainless, fits BGS-30 169.00 06001284 Shelf angle for BGS 20.00 11000081 GT-033126 13½" X 32¼" coated shelf (fits CM models) 106.00 07000159 19⅝" X 19⅝" shelf (ts MFV bottom and middle) 50.00 07000160 9-13/16" X 19⅝" shelf (ts MFV top) 35.00

3. 06000165 18⅞" X 20⅛" dry storage shelf (fits DS24 manufactured before 04/03) 63.00 (fits BB24, BB36, FV24, ND72 middle door and refrig. end of remote PT models) 06001195 GT-033135 20⅝" X 21½" dry storage shelf (fits DS24 manufactured after 04/03) 63.00

4. 06001196 GT-037707 Floor for DS24 (manufactured after 04/03) 63.00

06000167 GT-033129 18⅞" X 15⅞" dry storage shelf (fits DS36) 63.00 06000168 18⅞" X 18-1/16" dry storage shelf (fits end doors on ND models) 63.00 06000169 GT-033130 18⅞" X 22-1/16" dry storage shelf (fits DS48 and DS72 ends) 63.00

06000170 GT-033131 18⅞" X 23⅞" dry storage shelf (fits DS72, middle) 63.00 06001557 GT-038434 Pilaster 5.00 06001574 GT-038833 Thumbscrew, stainless steel, for pilaster 1.50 06001565 GT-038468 Clip, for pilaster, stainless steel 1.50 00000018 Nut, acorn, 8/32" natural nylon 1.00 06001579 GT-040305 ABS Scuff Channel with mounting screws 26.00 06001580 GT-040328 ABS Scuff Channel (ND models) with mounting screws 26.00

5. W-RACK-18 Wine racks, set of two for 18-1/16" shelf (shelf not included) 88.00 W-RACK-20 Wine racks, set of two for 20⅛" shelf (shelf not included) 88.00 W-RACK-22 Wine racks, set of two for 22-1/16" shelf (shelf not included) 88.00 06001610 K-RACK-ND Keg rack, stainless, 18¾" (ND end) 195.00 06000041 K-RACK-KC Keg rack, stainless, 20¾" (KC24 models manufactured before 04/14/06) 195.00 06001608 K-RACK-21 Keg rack, stainless, 20¾" (BB self contained & KC24, BB end & ND middle) 195.00

6. 06001609 K-RACK-24 Keg rack, stainless, 24½" (BB middle doors) 195.00 06003035 K-RACK-PT Keg rack, stainless, 24½" (PT end) 195.00 06000043 Keg rack, stainless, 24½" (PT middle) 195.00

18-7/8" x 20-1/8"

18-7/8" x 22-1/16"

DS24 Dry Storage Floor

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

Dry Storage Shelf

Wine Rack

(shelf not included)

Keg Rack

refrigeration coMPartMent coVers

efrigeration coMPartMent coVers for

Part no. olD Part no. DescriPtion Price

06002814 Panel, access, BB24/KC24 $44.00

efrigeration coMPartMent coVers for enDWall

1. 06000624 GT-036180 Grill, black vinyl clad, endwall BB, ND, or KC, 33-1/2”H, 11-3/4”L, 1-3/8”W 120.00 06003050 GT-036181 Grill, stainless, endwall BB, ND, or KC, 33-1/2”H, 11-3/4”L, 1-3/8”W 140.00

06000661 Grill, unlaminated, endwall BB, ND, or KC, 33-1/2”H, 11-3/4”L, 1-3/8”W 140.00

2. 06007631 06007632 Grill, stainless, PT and non-endwall BB, ND, or KC, 33-1/2”H, 11-3/4”L, 1-3/8”W 140.00

06001736 Grill, unlaminated, PT and non-endwall BB, ND, or KC, 33-1/2”H, 11-3/4”L, 1-3/8”W 140.00

3. 06000662 GT-036182 Grill, black vinyl clad, 12” low refrigeration, PT and non-endwall BB, ND, or KC, 110.00 19-1/2”H, 11-3/4”L, 1-3/8”W 06001737 GT-036183 Grill, stainless, 12” low refrigeration, PT and non-endwall BB, ND, or KC, 19-1/2”H, 130.00 11-3/4”L, 1-3/8”W

06001738 GT-036186 Grill, black vinyl clad, LP models, 27-1/2”H, 11-3/4”L, 1-3/8”W 120.00

4. 06001739 GT-036187 Grill, stainless, LP models, 27-1/2”H, 11-3/4”L, 1-3/8”W 140.00 06007634 Grill, unlaminated, LP models, 27-1/2”H, 11-3/4”L, 1-3/8”W 140.00

5. 06001740 GT-036190 Grill, black vinyl clad, 8” refrigeration, 33-1/2”H, 7-3/4”L, 1-3/8”W 80.00 06001741 GT-036191 Grill, stainless, 8” refrigeration, 33-1/2”H, 7-3/4”L, 1-3/8”W 100.00

6. 07000202 GT-036129 Grill, front, black vinyl clad, ST24 or FV24, 9-3/8”H, 20-7/8”L, 3/8”W 50.00 07000203 GT-036130 Grill, front, stainless, ST24 or FV24, 9-3/8”H, 20-7/8”L, 3/8”W 80.00 06001742 Grill, front, black vinyl clad, FV48, 9-3/8”H, 44-7/8”L, 3/8”W 70.00

06001743 Grill, front, stainless, FV48, 9-3/8”H, 44-7/8”L, 3/8”W 90.00

06001744 GT-036195 Grill, black vinyl clad, 18” refrigeration, 33-1/2”H, 17-3/4”L, 1-3/8”W 90.00 06001745 GT-036196 Grill, stainless, 18” refrigeration, 33-1/2”H, 17-3/4”L, 1-3/8”W 150.00

7. 06001746 GT-036197 Grill, black vinyl clad, 18” low refrigeration, 19-1/2”H, 17-3/4”L, 1-3/8”W 80.00 06001735 GT-036198 Grill, stainless, 18” low refrigeration, 19-1/2”H, 17-3/4”L, 1-3/8”W 140.00

8. 06001360 GT-032005 Grill insert, refrigeration compartment cover, polypropylene, black 25.00

9. 06001361 GT-032006 Grill insert, refrigeration compartment cover, polypropylene, gray 25.00 06001546 GT-037023 Filter, refrigeration compartment grill insert 7.00

10. 06001848 Laminated compressor compartment trim rail kit, for BB, PT, and ND models 39.00 06001849 Laminated compressor compartment trim rail kit, for LP models 39.00 06001850 Laminated compressor compartment trim rail kit, for special low profile compartments 39.00 06001555 Rubber Bumper 2.15

efrigeration coMPartMent coVers for

Grill, black vinyl clad, PT and non-endwall BB, ND, or KC, 33-1/2”H, 11-3/4”L, 1-3/8”W

efrigeration coMPartMent coVers for

efrigeration coMPartMent coVers relateD Parts

Pt,

anD non enDWall

bb24

anD

Kc24 M

oDels after

bb, nD, Kc52, Kc72 & Kc84 M

bb, nD52, nD72, Kc72,

lP M

oDels

nD48

anD

Kc48 M

fV24

anD

18” W

fV48 M

iDe coMPressor coMPartMents

oDels

4/14/06

anD

oDels

Kc84 M

oDels

120.00

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

220 Volt electrical Parts

BB24 SeLF CoNTaiNeD & KC24 ComPreSSor, CoNDeNSer & reLaTeD ParTS

Part no. DescriPtion Price

06001437 Compressor, 1/6HP, 220V, 50Hz, R134a $435.00 06004143 Relay, compressor, 1/6HP, 220V/50Hz, R134a 15.00 06004144 Overload protector, compressor, 1/6HP, 220V/50Hz, R134a 15.00 06001398 Automatic defrost timer, 6 hour, 220V, 50Hz 43.00 06001448 Condenser fan motor, 220V 57.00

STaNDarD BB36 ComPreSSor, CoNDeNSer & reLaTeD ParTS

11000083 Compressor, 1/5 HP, 220V, 50Hz, R22 $500.00 11000196 Start capacitor, 1/5 HP, R22, 220V/50Hz Tecumseh compressor 15.00 11000198 Relay, 1/5 HP, R22, 220V/50Hz Tecumseh compressor 19.50 11000199 Overload protector, 1/5 HP, R22, 220V/50Hz Tecumseh 15.00 09000337 Condenser fan motor, 220V, 16 watt 140.00 06001398 Automatic defrost timer, 6 hour, 220V, 50 Hz 43.00

LP60, LP84, LP108, NoN eNDwaLL BB60, BB84, BB108, ND52, ND72, ND92, KC48, KC72, KC84

06001436 Compressor, 1/3 HP, 220V, 50Hz, R22 $500.00 06001793 Start capacitor, for 1/3 HP R404A and R22 compressor, 220/50Hz 25.00 06004146 Relay, compressor, 1/3HP, 220V/50Hz, R22 15.00 06004147 Overload protector, compressor, 1/3HP, 220V/50Hz, R22 15.00 09000337 Condenser fan motor, 220V, 16 watt 140.00 06001398 Automatic defrost timer, 6 hour, 220V, 50 Hz 43.00

BB36, BB60, ND52, & KC52 ComPreSSor & CoNDeNSer reLaTeD ParTS For eNDwaLL moDeLS

06001440 Compressor, 1/3 HP, 220V, 50Hz, R134a $525.00 06004203 Relay, 1/3 HP 220V 50Hz R134a Tecumseh compressor 12.00 06004057 Overload protector, 1/3 HP 220V 50Hz R134a Tecumseh compressor 17.00 11000196 Start capacitor, 1/3 HP 220V 50Hz R134a Tecumseh compressor 15.00 06001451 Condenser fan motor, 9 watt, 220V 50Hz 120.00 06001398 Automatic defrost timer, 6 hour, 220V, 50 Hz 43.00

BB84, BB108, ND72, ND92, KC72 & KC84 ComPreSSor & CoNDeNSer reLaTeD ParTS For eNDwaLL moDeLS

06001438 Compressor, 1/3 HP, 220V, 50Hz, R404a $510.00 06001793 Start capacitor, for 1/3 HP R404A and R22 compressor, 220/50Hz 25.00 06001794 Relay, 1/3 HP 220V 50Hz R404a compressor 15.00 06001795 Overload protector, 1/3 HP 220V 50Hz R404a compressor 15.00 09000337 Condenser fan motor, 220V, 16 watt 140.00 06001398 Automatic defrost timer, 6 hour, 220V, 50 Hz 43.00

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

220 Volt electrical Parts

PT60, PT84 & PT108 ComPreSSor & CoNDeNSer reLaTeD ParTS

FV24 & FV48 ComPreSSor & CoNDeNSer reLaTeD ParTS Prior To 2010

11000083 Compressor, 1/5 HP, 220V, 50Hz, R22 $500.00

11000196 Start capacitor, 1/5 HP 220V/50Hz R22 Tecumseh compressor 15.00 11000198 Relay, 1/5 HP 220V/50Hz R22 Tecumseh compressor 19.50 11000199 Overload protector, 1/5 HP 220V/50Hz R22 Tecumseh compressor 15.00 06001451 Condenser fan motor, 9 watt, 220V 50Hz 125.00 06001398 Automatic defrost timer, 6 hour, 220V, 50 Hz 43.00

FV24 & FV48 ComPreSSor & CoNDeNSer reLaTeD ParTS aFTer 01/01/2010

VerTiCaL Door CooLer eVaPoraTorS & reLaTeD ParTS

06001430 Rope lighting, 220V, 50Hz, per foot 9.00 06001318 Rope lighting power cord and connector, 220V European plug style 20.00 06001455 Blower motor, 220V (Endwall BB84, BB108, ND72, ND92, KC52, KC72, KC84) 270.00 06001448 Evaporator fan motor, 220V (Endwall BB36, BB60, ND52, & All Non EW Models) 57.00 06004201 Assembly, shroud, evaporator, 2-fan, 1-2 door e/w, 220 Volt 445.00 06004202 Assembly, shroud, evaporator, 2-fan, 1-2 door e/w, 220 Volt, digital t-stat 600.00

electrical coMPonents

Part no. DescriPtion Price

06006121 Replacement powercord assembly, includes (06001572 06009527) $40.00

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.com

UNPARALLELED UNDERBAR DESIGN & ENGINEERING

Expect more

more flexibility

more features

Glastender has the most complete line of bar equipment and the ability to manufacture custom units, giving you virtually

unlimited design exibility. Each piece of equipment is engineered with features that enhance your efciency, ease

your maintenance, and prolong the life of your investment.

GLASSWASHERS • COCKTAIL STAT IONS • COOLERS • FROST ERS • BEER SYST EMS

The exibility you want. The features you need.

Glastender. Expect more.

Glastender BB108 Series, ND72 Series, ND52 Series, ND92 Series, FV24 Series Operation Manual, Parts Directory, And Price List

Specifications and Main Features

Frequently Asked Questions

User Manual