Glastender KC60R-BS-LR User Manual
5-15P
A family company manufacturing in the USA
www.glastender.com
Project:
Item #: Qty:
Model #:
Keg Coolers
Two, Three and Four Keg
Self-Contained
KC__ _-_ S(___)
AIA#
SIS#
KC60L-BS(LR)
Standard Features
• Galvanized steel interior with stainless steel floor
• Stainless steel keg racks and 1/2″ thick high impact
polypropylene threshold scuff plate
• Stainless steel finished top
• Stainless steel draft beer tower and drain pan - 2-faucet
column (KC60), 3-faucet column (KC72), 4-faucet tee
(KC84)
• Locking doors
Size:
60 = 60" Two Keg
72 = 72" Three Keg
84 = 84" Four Keg
Refrig. Compartment:
L = Left or R = Right
4004503
Conforms to NSF/ANSI STD 7 and UL STD 471
Certied to CSA STD C22.2 No. 120
Meets NSF 7 requirements for closed container products
Door Hinge Location†:
(from left to right)
L = Left or R = Right
Top Style:
S = Stainless
Door Style:
B = Black vinyl-clad
S = Stainless
† Specify hinge location for each door
• Evaporator above compressor compartment to maximize
storage capacity
• Recessed compressor compartment back and 90° electrical
plug enables flush wall placement
• Easy to remove condenser filter can be regularly cleaned to
maintain condenser coil efficiency
• 180° swinging doors
• Leg sockets recessed into base
Specications
Electrical
• 120V, 1 phase, 60 Hz
• Full load amps - 5.7
• Dedicated 15 amp circuit is required
• Includes a 6 foot NEMA 5-15P grounded cord
and plug which exits the back of refrigeration
compartment
Refrigeration
• R134a
• Compressor - 1/4 HP
• Heat rejection - 2334 BTU/Hr
• Operating Range
• 34°F (1°C) to 40°F (4°C)
Plumbing
• Automatic condensate evaporator. No drain connection required
• 1/2″ tailpiece provided on drain pan and pre-plumbed drain line
which exits out bottom front of refrigeration compartment
Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA Rev. 12-21-16
G
W
Materials
• Stainless steel parts include: interior floor, evaporator cover, front
of cabinet, hinges, hinge and lock brackets, and optional legs
• Black vinyl-clad steel parts include: standard sides, doors, and
compressor cover
• Galvanized steel parts include: interior walls and ceiling, exterior
sub-top, back and bottom
• Zinc plated CR steel parts include: leg sockets
Capacities KC60 KC72 KC84
• 1/2 barrels 2 3 4
• 1/4 barrels 2 3 4
• 1/6 barrels* 8 11 14
*Consult factory for different tower options.
Approval/Notes:
4.12
RECESSED BACK
FOR ELECTRICAL
Self-Contained Keg Coolers
Dimensional Information
KC60
RECESSED BACK
FOR ELECTRICAL
PLUG SPACE
KC72
RECESSED BACK
FOR ELECTRICAL
PLUG SPACE
KC84
1-1/8"
PLUG SPACE
12"
1-1/8"
CONDENSING UNIT
COMPARTMENT
12"
1-1/8"
CONDENSING UNIT
COMPARTMENT
12"
CONDENSING UNIT
COMPARTMENT
X
Y
2"
180°
SWING
X
Y
X
Y
2"
180°
SWING
2"
180°
SWING
SWING WILL
CONTINUE IF
NO CABINET
TO IMPEDE
SWING WILL
CONTINUE IF
NO CABINET
TO IMPEDE
SWING WILL
CONTINUE IF
NO CABINET
TO IMPEDE
29-3/4"
29-3/4"
DOOR
OPENING
29-3/4"
DOOR
OPENING
20"
DOOR
OPENING
20"
20"
36"
36"
36"
Typical Side View
15-1/4"
10"
30-3/4"
STANDARD CABINET
10-5/8"
36"
20"
24"
5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
48"
22-3/4" 25-1/4"
180°
SWING
WITH OPTIONAL 6" LEGS
22-1/2"
Note: Available with compressor
left or right. Compressor left model
shown. Use Model Number Key to
specify location when ordering.
36"
6"
Printed in USA
Loading...