Page 1
Operation Manual, Parts Directory, and Price List
A Family Company Manufacturing
In The USA Since 1969
Self-Contained BaCk Bar CoolerS
*Cooler Serial numBer information
This manual is specic to self-contained coolers listed below
beginning with serial number 134169912 and purchased in 2017
and after.
• Back Bar - BB36, BB60, BB84, BB108
• Narrow Door - ND32, ND52, ND72, ND92
• Low Prole - LP36, LP60, LP84
• Pass Thru - PT36, PT60, PT84
• Keg Coolers - KC36, KC60, KC72, KC84
• Low Prole Narrow Door - LN32, LN52, LN72, LN92
• Narrow Door Pass Thru - NP32, NP52, NP72
• Low Prole Pass Thru - LPT36, LPT60, LPT84
• Low Prole Narrow Door Pass Thru - LNP32, LNP52, LNP72
Glastender, Inc. · 5400 North Michigan Road · Saginaw, MI · 48604-9780
800.748.0423 · 989.752.4275 · Fax 989.752.4444 · www.glastender.com
Rev. 01-09-18 OM001
© 2017 Glastender, Inc.
Page 2
index
Cooler Serial numBer information .......................... Cover
digital Controller operation ...........................................2
inStallation
Introduction .......................................................................3
Utility Requirements and Connections .............................3
Uncrating and Start-Up Instructions .................................3
Operation ...........................................................................3
Cleaning Instructions .................................................. 3 - 4
Sealing Vertical Door Cooler to Floor Instructions ..........4
Cooler Installation Checklist ............................................5
Beer Tower Installation .....................................................5
SpeCifiCationS
Wiring Diagrams ...............................................................6
replaCement partS
Compressor and Condenser Related Parts ........................7
Evaporator and Related Parts ...........................................8
LED Channel Assemblies ......................................... 9 - 10
Shelving, Racks and Related Parts ......................... 11 - 12
Doors and Related Parts .........................................13 - 17
Electrical Components ....................................................17
Refrigeration Compartment Covers ................................18
220 Volt Electrical Parts .................................................18
ServiCe and partS
Terms and Conditions .....................................................19
Warranty ..........................................................................20
1
OM001
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
Page 3
digital Controller operation
The operating temperature range is preset at the factory
according to the table below and can be adjusted up or down
within the limits shown.
Setting the desired temperature-
To access the setpoints setup menu, press Set for 2 seconds. The
message SP will appear on the display followed by the normal
setpoint set value. Use the Increase key or Decrease key to
modify the value and conrm by pressing Set. Immediately, the
message SP-E appears indicating the setting of the economic
setpoint. Again, use the Increase key or Decrease key to modify
the value and conrm by pressing Set. Finally, the - - - -
indication signals the set up completion. The setpoints can also
be adjusted individually in the quick access menu.
Factory Settings Range of Adjustment
Set Point Operating Range† Minimum Set Point Maximum Set Point
Standard Cooler Setting
Two Zone Cooler Settings*
B = Beer
W = White Wine
R = Red Wine
† Adjusting the factory set point will also adjust the operating range by the same amount
* To determine a Two Zone Cooler refrigeration conguration, refer to the 5th and 6th characters in the model number found on the
cooler data tag. These characters will always be one of the following: BW (Beer/White Wine), BR (Beer/Red Wine), or WR
(White Wine/Red Wine). Example: MODEL: BB60BRL-XS(LR).
34º F 34º F to 39º F 33º F 65º F
34º F 34º F to 39º F 33º F 65º F
50º F 50º F to 55º F 33º F 65º F
60º F 60º F to 65º F 33º F 65º F
The refrigerator is programmed to automatically defrost four times
daily for approximately twenty minutes. During defrost, the fan
inside the cooler will remain on and the refrigeration system will turn
off. The defrost process can be activated/deactivated manually in the
quick access menu through the dEFr or pressing the Increase key for 4
seconds. Activation or deactivation will be indicated by the messages
dEFr On or dEFr OFF respectively.
The thermostat controller has an “OFF” function. The shutdown of he
control functions allows the controller to operate only as a temperature
indicator, keeping the control outputs and alarms off. The use of this
feature is enabled or disabled by the shutdown function of the control
functions. When enabled, the control functions and alarms are switched
off CtrL OFF or on Ctrl On in the quick access menu through the
CtrL option. When the control functions are off, the message OFF is
displayed alternating with the temperature and other messages. Also
is possible turn on/turn off the control functions by pressing the Quick
Access Menu key for 5 seconds.
Models BB, ND, LP, PT Self Contained Coolers thermostat controller
The thermostat control probe wire may become disconnected when
the compressor compartment cover and/or grill are removed. This will
result in thermostat Err 1 or Err 3 code. Service calls to reconnect the
probe wiring are not covered by factory warranty.
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
SignalS
Ambient sensor disconnected or out of range.
Sensor 3 disconnected or out of range.
Operation with economic setpoint.
High ambient temberature alarm (sensor1).
Low ambient temperature alarm (sensor1).
High temperature in condenser alarm (level 1). If
this signal occurs, condenser may need cleaning.
High temperature in condenser alarm (level 2).
this signal occurs, condenser may need cleaning.
Compressor reached the maximum time on
without reaching the SP.
Control routines off.
It indicates that the temperature for end of
defrost has not been reached.
Please contact Full Gauge Controls.
Recongure the values of the functions.
OM001
If
2
Page 4
inStallation
introduCtion
This manual describes the operational features of the self-contained coolers listed on the front of this manual. Please review
this information before attempting installation and operation.
Long term, trouble-free service will follow if good housekeeping and maintenance procedures are followed. Thank you
for selecting Glastender, Inc. products.
utility requirementS and ConneCtionS
• Electrical: 120 Volt AC, 1 Phase, 60 Hz. A separate 15 Amp circuit is recommended. A 6-foot grounded
cord and plug is included with self-contained models.
• Plumbing:
Automatic condensate evaporator is included. No drain connection required.
unCrating and Start-up inStruCtionS
All models are shipped in one carton. These steps should be followed:
1. If legs or casters are included, bolt them to the base with the bolts provided.
2. Unwrap power cord from base if included.
3. Position unit and level and/or seal as required (see page 4 and 5).
4. All units intended for draft beer must be plumbed to an external drain. On self-contained models with draft beer
and a factory installed finished top, the beer tower drain pan is plumbed through the cabinet and stubs out in the
3" space below the compressor compartment. Connection to an external drain must be made from that point.
5. Place shelves in desired location.
6. Plug into 115 volt AC outlet.
7. Load with bottles or cans and allow time for products to cool.
8. Your Glastender equipment is now ready for use.
operation
The operating temperature range is 34°F (1°C) to 40°F (5°C).
Self-contained models include an automatic defrost system. The refrigerator will defrost four times daily for approximately
20 minutes. During the defrost, the fan inside the cooler will remain on and the refrigeration system will turn off.
Cleaning inStruCtionS
Cleaning is essential to sustaining the integrity of your equipment and preventing corrosion.
ESTIMATED CLEANING TIME: 5 to 10 minutes per unit daily, 45 minutes quarterly
FREQUENCY: Daily cleaning of exterior & door gaskets. Monthly cleaning of condenser filter. Quarterly cleaning of
interior, including shelves.
(Cleaning Instructions continued on page 4)
3
OM001
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
Page 5
inStallation
COOLER DOOR
COOLER CABINET
1" BASE
BEAD SEALANT
FLOOR
MAGNETIC GASKET
(Cleaning Instructions continued from page 3)
Cleaning condenser lter:
PROCEDURE:
1. A non-chlorine based cleaner or mild detergent and warm water
applied with a soft cloth or sponge to all contact surfaces.
2. Immediately rinse off cleaning agent(s), using clean warm water,
clean soft cloth or sponge.
3. Dry with a soft clean cloth, removing standing water as soon as
possible.
4. Condenser filter - remove small louvered covers only. Do NOT
remove compressor cover panel as thermostat control probe wire
will become disconnected and cause operation failure not covered
by factory warranty (see page 2).
NOTES:
1. Never use hydrochloric acid, wire brushes, steel wool, scrapers, or
chlorine based cleaners on stainless steel surfaces, since they will
break down the passivity layer and allow corrosion to occur.
2. On stainless steel surfaces, you may use a soft bristle brush or Scotch-Brite® pad for more stubborn stains. Always
scrub with the direction of the grain. Follow with a thorough cleaning as described above.
3. Deposits from food preparation must be properly removed. Even hard water deposits will rust stainless steel, if not
removed.
4. Repeated cleaning may dry up black-vinyl-clad steel (exterior) surfaces of the cooler. Armor All® or similar product
can bring back the shine. Apply the product to a cloth and then rub into the surface, rather than spraying it directly onto
the black-vinyl-clad surface.
5. The cooler door gaskets are most often overlooked when cleaning. Failure to clean them regularly will lead to prema-
ture failure, since alcohol and moisture build-up breaks down the gasket material.
Do NOT remove
compressor panel
Remove small louvered
covers only
Sealing vertiCal door Cooler to floor
To comply with NSF & health codes, the cooler base must be sealed to the floor using NSF listed sealant. Place a bead
of sealant along outer edges of the base and remove excess with disposable towel. The floor sealing procedure does not
apply to models that include legs or casters.
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
Side View of Cabinet
OM001
4
Page 6
inStallation
attention inStaller: WARNING!!
Failure to level this cooler WILL VOID THE FACTORY WARRANTY. Doors will not close properly causing
damage to hinges, handles, and/or gaskets which will adversely affect the refrigeration systems.
COOLER WITH 6" LEGS
Cooler inStallation CheCkliSt
Is the unit evenly and solidly supported, either upon legs, or flat on the base; check for high spots?
COOLER WITHOUT LEGS
If the unit was designed for legs, are they attached?
Is the unit level at the base, from end to end?
Do the doors open and close freely, without touching any other part of the unit in travel?
Are there open holes to the outside of the cabinet which are not plugged or insulated?
Are there obstructions of any kind to air flow into or out of the condensing unit?
Is product tubing or are other lines installed in such a manner to not allow shelf access?
SpeCial inStruCtionS for Beer tower inStallation
Before you begin:
1. Disassemble the tower into three parts, stiffener, skin, and top plate, by
unscrewing the top two screws.
2. Mount the column stiffener with the provided four 1/4"-20x1-1/2" bolts.
3. Install insulation provided into the bottom of the column stiffener.
4. Place the column skin over the stiffener. Run the beer lines through the
hole at the same time.
5. Install insulation provided into the top of the tower assembly.
6. Mount the column top plate to the column stiffener with the two #10-32x1/2" phillips at head s/s machine
screws provided.
7. Apply a bead of silicone sealant around the perimeter of the column. Use your nger to smooth out the bead.
8. Wash tapping device and faucet with detergent and water. Flush beer tapping device and faucet lines.
top plate
stiffener
skin
5
OM001
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
Page 7
wiring diagram
RED
RED
CONTROL
OPTIONAL
06010156
FAN
RED
CONTROL
FAN
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
OM001
6
Page 8
CompreSSor and CondenSer related partS
part no. deSCription priCe
06008990 Single door compressor EM45HHR1 $390.00
06010021 Multiple door compressor FFU80HAX 385.00
1. 06010201 Electrical kit, 120V Embraco compressor, includes relay, cover, OLP, start cap 65.00
2. 06011060 Condensor assembly kit, endwall, single door 725.00
3. 06011062 Condensor assembly kit, endwall, multiple door 770.00
4. 06001449 Condenser fan motor 100.00
5. 06010027 Single door condenser fan blade, 6" diameter 10.00
6. 07000155 Multiple door condenser fan blade, 7" diameter 12.00
7. 11000080 Condenser coil 225.00
8. 06010023 Filter dryer, receiver combo 40.00
9. 06011056 Digital thermostat w/probe, preset to standard temp, range 34-40 degrees F 120.00
9. 06011057 Digital thermostat w/probe, preset to red wine temp, range 60-65 degrees F 120.00
9. 06011058 Digital thermostat w/probe, preset to white wine temp, range 50-55 degrees F 120.00
06006990 Condenser fan bracket 14.00
06005359 Drain pan assembly w/ wicking material 42.00
06001345 Drain tubing 1.45 per foot
1
2
3
4
5
7
9
6
7
OM001
8
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
Page 9
evaporatorS and related partS
part no. deSCription priCe
1. 06010030 Evaporator fan motor $190.00
2. 06010027 Single door evaporator fan blade, 6” diameter 10.00
3. 06010029 Multiple door evaporator fan blade, 7.25” diameter 10.00
4. 06010041 Evaporator fan guard 25.00
5. 06004231 Evaporator coil 200.00
06010046 Single door metering device (TXV) 110.00
6. 06006096 Multiple door metering device (TXV) 135.00
06006109 Power supply, LED light strip 60.00
06001412 Switch 5.00
06006107 LED light replacement (1 only) 12.50
06005372 Evaporator drain pan 48.00
06006995 Fan bracket 14.00
7. 06010047 Finger guard 5.00
2
3
1
4
7
5
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
6
OM001
8
Page 10
led Channel aSSemBlieS
part no. deSCription priCe
06010634 LED channel assembly, 24″ remote / 36″ self-contained, standard white $50.00
06010635 LED channel assembly, 24″ remote / 36″ self-contained, amber 50.00
06010636 LED channel assembly, 24″ remote / 36″ self-contained, blue 50.00
06010637 LED channel assembly, 24″ remote / 36″ self-contained, warm 50.00
06010638 LED channel assembly, 48″ remote / 60″ self-contained, standard white 75.00
06010639 LED channel assembly, 48″ remote / 60″ self-contained, amber 75.00
06010640 LED channel assembly, 48″ remote / 60″ self-contained, blue 75.00
06010641 LED channel assembly, 48″ remote / 60″ self-contained, warm 75.00
06010642 LED channel assembly, BB60TZ, standard white 75.00
06010643 LED channel assembly, BB60TZ, amber 75.00
06010644 LED channel assembly, BB60TZ, blue 75.00
06010645 LED channel assembly, BB60TZ, warm 75.00
06010646 LED channel assembly, 72″ remote / 84″ self-contained, standard white 100.00
06010647 LED channel assembly, 72″ remote / 84″ self-contained, amber 100.00
06010648 LED channel assembly, 72″ remote / 84″ self-contained, blue 100.00
06010649 LED channel assembly, 72″ remote / 84″ self-contained, warm 100.00
06010650 LED channel assembly, BB84TZ, standard white 100.00
06010651 LED channel assembly, BB84TZ, amber 100.00
06010652 LED channel assembly, BB84TZ, blue 100.00
06010653 LED channel assembly, BB84TZ, warm 100.00
06010654 LED channel assembly, 96″ remote / 108″ self-contained, standard white 125.00
06010655 LED channel assembly, 96″ remote / 108″ self-contained, amber 125.00
06010656 LED channel assembly, 96″ remote / 108″ self-contained, blue 125.00
06010657 LED channel assembly, 96″ remote / 108″ self-contained, warm 125.00
06010658 LED channel assembly, BB108TZ, standard white 125.00
06010659 LED channel assembly, BB108TZ, amber 125.00
06010660 LED channel assembly, BB108TZ, blue 125.00
06010661 LED channel assembly, BB108TZ, warm 125.00
06010662 LED channel assembly, ND32, standard white 50.00
06010663 LED channel assembly, ND32, amber 50.00
06010664 LED channel assembly, ND32, blue 50.00
06010665 LED channel assembly, ND32, warm 50.00
9
OM001
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
Page 11
led Channel aSSemBlieS
part no. deSCription priCe
06010666 LED channel assembly, 40″ remote / 52″ self-contained, standard white $75.00
06010667 LED channel assembly, 40″ remote / 52″ self-contained, amber 75.00
06010668 LED channel assembly, 40″ remote / 52″ self-contained, blue 75.00
06010669 LED channel assembly, 40″ remote / 52″ self-contained, warm 75.00
06010670 LED channel assembly, ND52TZ, standard white 75.00
06010671 LED channel assembly, ND52TZ, amber 75.00
06010672 LED channel assembly, ND52TZ, blue 75.00
06010673 LED channel assembly, ND52TZ, warm 75.00
06010674 LED channel assembly, 60″ remote / 72″ self-contained, standard white 100.00
06010675 LED channel assembly, 60″ remote / 72″ self-contained, amber 100.00
06010676 LED channel assembly, 60″ remote / 72″ self-contained, blue 100.00
06010677 LED channel assembly, 60″ remote / 72″ self-contained, warm 100.00
06010678 LED channel assembly, ND72TZ, standard white 100.00
06010679 LED channel assembly, ND72TZ, amber 100.00
06010680 LED channel assembly, ND72TZ, blue 100.00
06010681 LED channel assembly, ND72TZ, warm 100.00
06010682 LED channel assembly, 80″ remote / 92″ self-contained, standard white 125.00
06010683 LED channel assembly, 80″ remote / 92″ self-contained, amber 125.00
06010684 LED channel assembly, 80″ remote / 92″ self-contained, blue 125.00
06010685 LED channel assembly, 80″ remote / 92″ self-contained, warm 125.00
06010686 LED channel assembly, ND92TZ, standard white 125.00
06010687 LED channel assembly, ND92TZ, amber 125.00
06010688 LED channel assembly, ND92TZ, blue 125.00
06010689 LED channel assembly, ND92TZ, warm 125.00
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
OM001
10
Page 12
Shelving, raCkS and related partS
part no. deSCription priCe
06011100 Shelf kit, 20″ (set of 3 shelves and 8 clips), BB, left door, includes 06010065 (3),
06001636 (2017 and after)
06011101 Shelf kit, 22″ (set of 3 shelves and 8 clips), BB, left door, includes 06010067 (3),
06001636 (2017 and after)
06011102 Shelf kit, 24″ (set of 3 shelves and 8 clips), BB, middle door, includes 06010066 (3),
06001636 (2017 and after)
06011103 Shelf kit, 22″ (set of 3 shelves and 8 clips), BB, right door, includes 06010068 (3),
06001636 (2017 and after)
06011104 Shelf kit, 20″ (set of 2 shelves and 4 clips), LP36, includes 06010065 (2), 06007724
(2017 and after)
06011105 Shelf kit, 22″ (set of 2 shelves and 4 clips), LP, left door, includes 06010067 (2),
06007724 (2017 and after)
06011106 Shelf kit, 24″ (set of 2 shelves and 4 clips), LP, middle door, includes 06010066 (2),
06007724 (2017 and after)
06011107 Shelf kit, 22″ (set of 2 shelves and 4 clips), LP, right door, includes 06010068 (2),
06007724 (2017 and after)
06011108 Shelf kit, 16″ (set of 2 shelves and 4 clips), LPND32, includes 06010055 (2), 06007724
(2017 and after)
06011109 Shelf kit, 18″ (set of 2 shelves and 4 clips), LPND, left door, includes 06010057 (2),
06007724 (2017 and after)
06011110 Shelf kit, 20″ (set of 2 shelves and 4 clips), LPND, middle door, includes 06010056 (2),
06007724 (2017 and after)
060 11111 Shelf kit, 18″ (set of 2 shelves and 4 clips), LPND, right door, includes 06010058 (2),
06007724 (2017 and after)
06011112 Shelf kit, 16″ (set of 2 shelves and 4 clips), LPNDPT32, includes 06010059 (2),
06007724 (2017 and after)
06011113 Shelf kit, 18″ (set of 2 shelves and 4 clips), LPNDPT, end door, includes 06010060 (2),
06007724 (2017 and after)
06011114 Shelf kit, 20″ (set of 2 shelves and 4 clips), LPNDPT, middle door, includes 06010061
(2), 06007724 (2017 and after)
06011115 Shelf kit, 20″ (set of 2 shelves and 4 clips), LPPT24, LPPT36, includes 06010062 (2),
06007724 (2017 and after)
06011116 Shelf kit, 22″, LPPT (set of 2 shelves and 4 clips), end door, includes 06010063 (2),
06007724 (2017 and after)
06011117 Shelf kit, 24″, LPPT (set of 2 shelves and 4 clips), middle door, includes 06010064 (2),
06007724 (2017 and after)
195.00
195.00
195.00
195.00
130.00
130.00
130.00
130.00
130.00
130.00
130.00
130.00
130.00
130.00
130.00
130.00
130.00
130.00
11
OM001
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
Page 13
Shelving, raCkS and related partS
part no. deSCription priCe
06011118 Shelf kit, 16″ (set of 3 shelves and 8 clips), ND32, ND53TZ, NDTZ, warm door,
includes 06010055 (3), 06001636 (2017 and after)
06011119 Shelf kit, 18″ (set of 3 shelves and 8 clips), ND, left door, includes 06010057 (3),
06001636 (2017 and after)
06011120 Shelf kit, 20″ (set of 3 shelves and 8 clips), ND, middle door, includes 06010056 (3),
06001636 (2017 and after)
06011121 Shelf kit, 18″ (set of 3 shelves and 8 clips), ND, right door, includes 06010058 (3),
06001636 (2017 and after)
06011122 Shelf kit, 16″ (set of 3 shelves and 8 clips), NDPT32, includes 06010059 (3), 06001636
(2017 and after)
06011123 Shelf kit, 18″ (set of 3 shelves and 8 clips), NDPT, end door, includes 06010060 (3),
06001636 (2017 and after)
06011124 Shelf kit, 20″ (set of 3 shelves and 8 clips), NDPT, middle door, includes 06010061 (3),
06001636 (2017 and after)
06011125 Shelf kit, 20″ (set of 3 shelves and 8 clips), PT36, includes 06010062 (3), 06001636
(2017 and after)
06011126 Shelf kit, 22″ (set of 3 shelves and 8 clips), PT, end door, includes 06010063 (3),
06001636 (2017 and after)
06011127 Shelf kit, 24″ (set of 3 shelves and 8 clips), PT, middle door, includes 06010064 (3),
06001636 (2017 and after)
06010158 Shelf divider, BB models 25.00
06010159 Shelf divider, PT models 25.00
06001557 Pilaster, aluminum, 24″ 5.00
06001574 Thumbscrew, stainless steel, for pilaster 2.00
06001565 Clip, for pilaster, stainless steel 2.00
00000018 Nut, acorn, 8/32″ natural nylon 1.00
06001579 ABS Scuff Channel with mounting screws 30.00
06001580 ABS Scuff Channel (ND models) with mounting screws 35.00
06006264 Wine rack shelf for BB, stainless steel with slots for 7 bottles 126.00
06006265 Wine rack shelf for ND, stainless steel with slots for 5 bottles 126.00
06009974 Keg rack, 16″ 126.00
06006236 Keg rack, 18″ 126.00
06006234 Keg rack, 20″ 126.00
06009975 Keg rack, 22″ 126.00
06006235 Keg rack, 24″ 126.00
195.00
195.00
195.00
195.00
195.00
195.00
195.00
195.00
195.00
195.00
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
OM001
12
Page 14
doorS and related partS
part no. deSCription priCe
06001462 Door handle, stainless $60.00
06001653 Door handle, brass 110.00
06001536 Door lock, stainless 36.00
06004009 Key, #806, for stainless cooler door lock (06001536) 4.00
06001535 Door lock, brass 43.00
06004010 Key, #606, for brass cooler door lock (06001535) 4.00
06010394 Integrated lock components - stainless or moly 40.00
06010395 Integrated lock components - galvanized 40.00
06001677 Plug for door handle, stainless 1.00
00000200 Screws for top of handle, stainless (set of 2), 10/32 x 1″ PFH Machine Screw 1.00
00000016 Screws for top of handle, brass (set of 2), 10/32 x 5/8″ PFH Machine Screw 1.00
00000046 Screw for bottom of handle, stainless, and screws for old style brackets .50
00000043 Screw for bottom of handle, black .50
06006207 Hinge set and brackets, 180° swing, left (complete with screws) 35.00
06006208 Hinge set and brackets, 180° swing, right (complete with screws) 35.00
07000356 Lock bracket 5.00
06006596 Hinge set and brackets for wood doors, 180° swing, left (complete with screws) 45.00
06006597 Hinge set and brackets for wood doors, 180° swing, right (complete with screws) 45.00
06006269 Lock bracket for raised wood panel doors 10.00
06004390 Gasket, door, standard cooler, gray, 22-1/2″ x 32″ OD 45.00
06006178 Gasket, door, Narrow Door Energy Star, gray, 18-1/2″ x 32″ OD 45.00
00000067 Screw for door hinges (4 required) .50 each
00000041 Bolts for brackets (6 required) .50 each
06001485 Plastic washer for hinge 1.00
06001569 Bushing for hinge (gray) 1.00
06008325 Trim rail kit, laminated door, standard, left hinge (2017 and after) 35.00
06008326 Trim rail kit, laminated door, standard, right hinge (2017 and after) 35.00
06008327 Trim rail kit, laminated door, standard, left hinge, for integrated lock (2017 and after) 35.00
06008328 Trim rail kit, laminated door, standard, right hinge, for integrated lock (2017 and after) 35.00
06008329 Trim rail kit, laminated door, LP, left hinge (2017 and after) 35.00
06008330 Trim rail kit, laminated door, LP, right hinge (2017 and after) 35.00
06008331 Trim rail kit, laminated door, LP, left hinge, for integrated lock (2017 and after) 35.00
06008332 Trim rail kit, laminated door, LP, right hinge, for integrated lock (2017 and after) 35.00
06008333 Trim rail kit, laminated door, LPND, left hinge (2017 and after) 35.00
06008334 Trim rail kit, laminated door, LPND, right hinge (2017 and after) 35.00
06008335 Trim rail kit, laminated door, LPND, left hinge, for integrated lock (2017 and after) 35.00
06008336 Trim rail kit, laminated door, LPND, right hinge, for integrated lock (2017 and after) 35.00
06008337 Trim rail kit, laminated door, ND, left hinge (2017 and after) 35.00
06008338 Trim rail kit, laminated door, ND, right hinge (2017 and after) 35.00
06008339 Trim rail kit, laminated door, ND, left hinge, for integrated lock (2017 and after) 35.00
06008340 Trim rail kit, laminated door, ND, right hinge, for integrated lock (2017 and after) 35.00
06010383 Trim rail kit, compressor compartment, standard (July 2016 and after) 39.00
06010384 Trim rail kit, compressor compartment, LP (2017 and after) 39.00
13
OM001
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
Page 15
doorS and related partS
BB Doors
part no. deSCription priCe
06006250 Door, black, BB, e/s $308.00
06006253 Door, stainless, BB, e/s 358.00
06008341 Door, laminated, BB, left hinge (2017 and after) 428.00
06008342 Door, laminated, BB, right hinge (2017 and after) 428.00
06008343 Door, unlaminated, BB, left hinge (2017 and after) 308.00
06008344 Door, unlaminated, BB, right hinge (2017 and after) 308.00
06010420 Door, glass, black, BB (2017 and after) 598.00
06010421 Door, glass, stainless, BB (2017 and after) 648.00
06008345 Door, glass, laminated, BB, left hinge (2017 and after) 718.00
06008346 Door, glass, laminated, BB, right hinge (2017 and after) 718.00
06010285 Door, black, BB, integrated lock, left (2017 and after) 345.00
06010286 Door, black, BB, integrated lock, right (2017 and after) 345.00
06010287 Door, stainless, BB, integrated lock, left (2017 and after) 395.00
06010288 Door, stainless, BB, integrated lock, right (2017 and after) 395.00
06010289 Door, laminated, BB, integrated lock, left (2017 and after) 465.00
06010290 Door, laminated, BB, integrated lock, right (2017 and after) 465.00
06010291 Door, unlaminated, BB, integrated lock, left (2017 and after) 345.00
06010292 Door, unlaminated, BB, integrated lock, right (2017 and after) 345.00
06010423 Door, glass, black, BB, integrated lock, left (2017 and after) 635.00
06010424 Door, glass, black, BB, integrated lock, right (2017 and after) 635.00
06010425 Door, glass, stainless, BB, integrated lock, left (2017 and after) 685.00
06010426 Door, glass, stainless, BB, integrated lock, right (2017 and after) 685.00
06010427 Door, glass, laminated, BB, integrated lock, left (2017 and after) 755.00
06010428 Door, glass, laminated, BB, integrated lock, right (2017 and after) 755.00
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
OM001
14
Page 16
doorS and related partS
LP Doors
part no. deSCription priCe
06007595 Door, black, LP, e/s $308.00
06007593 Door, stainless, LP, e/s 358.00
06008349 Door, laminated, LP, left hinge (2017 and after) 428.00
06008350 Door, laminated, LP, right hinge (2017 and after) 428.00
06008351 Door, unlaminated, LP, left hinge (2017 and after) 308.00
06008352 Door, unlaminated, LP, right hinge (2017 and after) 308.00
06010438 Door, glass, black, LP (2017 and after) 598.00
06010439 Door, glass, stainless, LP (2017 and after) 648.00
06008353 Door, glass, laminated, LP, left hinge (2017 and after) 718.00
06008354 Door, glass, laminated, LP, right hinge (2017 and after) 718.00
06010293 Door, black, LP, integrated lock, left (2017 and after) 345.00
06010294 Door, black, LP, integrated lock, right (2017 and after) 345.00
06010295 Door, stainless, LP, integrated lock, left (2017 and after) 395.00
06010296 Door, stainless, LP, integrated lock, right (2017 and after) 395.00
06010297 Door, laminated, LP, integrated lock, left (2017 and after) 465.00
06010298 Door, laminated, LP, integrated lock, right (2017 and after) 465.00
06010299 Door, unlaminated, LP, integrated lock, left (2017 and after) 345.00
06010300 Door, unlaminated, LP, integrated lock, right (2017 and after) 345.00
06010441 Door, glass, black, LP, integrated lock, left (2017 and after) 635.00
06010442 Door, glass, black, LP, integrated lock, right (2017 and after) 635.00
06010443 Door, glass, stainless, LP, integrated lock, left (2017 and after) 685.00
06010444 Door, glass, stainless, LP, integrated lock, right (2017 and after) 685.00
06010445 Door, glass, laminated, LP, integrated lock, left (2017 and after) 755.00
06010446 Door, glass, laminated, LP, integrated lock, right (2017 and after) 755.00
15
OM001
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
Page 17
doorS and related partS
ND Doors
part no. deSCription priCe
06006260 Door, black, ND, e/s $308.00
06006263 Door, stainless, ND, e/s 358.00
06008364 Door, laminated, ND, left hinge (2017 and after) 428.00
06008365 Door, laminated, ND, right hinge (2017 and after) 428.00
06008366 Door, unlaminated, ND, left hinge (2017 and after) 308.00
06008367 Door, unlaminated, ND, right hinge (2017 and after) 308.00
06010474 Door, glass, black, ND (2017 and after) 598.00
06010475 Door, glass, stainless, ND (2017 and after) 648.00
06008368 Door, glass, laminated, ND, left hinge (2017 and after) 718.00
06008369 Door, glass, laminated, ND, right hinge (2017 and after) 718.00
06010309 Door, black, ND, integrated lock, left (2017 and after) 345.00
06010310 Door, black, ND, integrated lock, right (2017 and after) 345.00
06010311 Door, stainless, ND, integrated lock, left (2017 and after) 395.00
06010312 Door, stainless, ND, integrated lock, right (2017 and after) 395.00
06010313 Door, laminated, ND, integrated lock, left (2017 and after) 465.00
06010314 Door, laminated, ND, integrated lock, right (2017 and after) 465.00
06010315 Door, unlaminated, ND, integrated lock, left (2017 and after) 345.00
06010316 Door, unlaminated, ND, integrated lock, right (2017 and after) 345.00
06010477 Door, glass, black, ND, integrated lock, left (2017 and after) 635.00
06010478 Door, glass, black, ND, integrated lock, right (2017 and after) 635.00
06010479 Door, glass, stainless, ND, integrated lock, left (2017 and after) 685.00
06010480 Door, glass, stainless, ND, integrated lock, right (2017 and after) 685.00
06010481 Door, glass, laminated, ND, integrated lock, left (2017 and after) 755.00
06010482 Door, glass, laminated, ND, integrated lock, right (2017 and after) 755.00
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
OM001
16
Page 18
doorS and related partS
LN Doors
part no. deSCription priCe
06006308 Door, black, LN $308.00
06006309 Door, stainless, LN 358.00
06008357 Door, laminated, LN, left hinge 428.00
06008358 Door, laminated, LN, right hinge 428.00
06008359 Door, unlaminated, LN, left hinge 308.00
06008360 Door, unlaminated, LN, right hinge 308.00
06010456 Door, glass, black, LN 598.00
06010457 Door, glass, stainless, LN 648.00
06008361 Door, glass, laminated, LN, left hinge 718.00
06008362 Door, glass, laminated, LN, right hinge 718.00
06010301 Door, black, LN, integrated lock, left 345.00
06010302 Door, black, LN, integrated lock, right 345.00
06010303 Door, stainless, LN, integrated lock, left 395.00
06010304 Door, stainless, LN, integrated lock, right 395.00
06010305 Door, laminated, LN, integrated lock, left 465.00
06010306 Door, laminated, LN, integrated lock, right 465.00
06010307 Door, unlaminated, LN, integrated lock, left 345.00
06010308 Door, unlaminated, LN, integrated lock, right 345.00
06010459 Door, glass, black, LN, integrated lock, left 635.00
06010460 Door, glass, black, LN, integrated lock, right 635.00
06010461 Door, glass, stainless, LN, integrated lock, left 685.00
06010462 Door, glass, stainless, LN, integrated lock, right 685.00
06010463 Door, glass, laminated, LN, integrated lock, left 755.00
06010464 Door, glass, laminated, LN, integrated lock, right 755.00
eleCtriCal ComponentS
part no. deSCription priCe
06006121 Replacement powercord assembly, includes (06001572 06009527) $40.00
17
OM001
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
Page 19
refrigeration Compartment CoverS
part no. deSCription priCe
06007628 Grill, black vinyl clad, for BB & ND w/digital control (control not included),
12″, replacement kit
06007629 Grill, stainless, for BB & ND w/digital control (control not included) 12″, replacement kit 140.00
06007630 Grill, unlaminated, for BB & ND w/digital control (control not included),
12″, replacement kit
06001360 Grill insert, refrigeration compartment cover, polypropylene, black 25.00
06001361 Grill insert, refrigeration compartment cover, polypropylene, gray 25.00
06001546 Filter, refrigeration compartment grill insert 7.00
06001848 Laminated compressor compartment trim rail kit, for BB and ND models 39.00
06010353 Grill assembly, LP, front, black 125.00
06010354 Grill assembly, LP, front, stainless 150.00
06010355 Grill assembly, LP, front, stainless, louvered 175.00
06010356 Grill assembly, LP, front, laminated 200.00
06010357 Grill assembly, LP, front, unlaminated 125.00
06010358 Grill assembly, LP, front, WD hardware 125.00
06010359 Grill assembly, LPT, back, moly 125.00
06010360 Grill assembly, LPT, back, stainless 150.00
06010361 Grill assembly, LPT, back, stainless, louvered 175.00
06010362 Grill assembly, LPT, back, laminated 200.00
06010363 Grill assembly, LPT, back, unlaminated 125.00
06010364 Grill assembly, LPT, back, WD hardware 125.00
06007643 Grill, black, two zone 135.00
06007644 Grill, stainless, two zone 150.00
06007645 Grill, laminated, two zone 200.00
06007646 Grill, unlaminated, two zone 135.00
06001555 Rubber bumper 2.15
$120.00
140.00
220 volt eleCtriCal partS
part no. deSCription priCe
06009150 Compressor, single door 220V $400.00
06010022 Compressor, multiple door 220V 400.00
06011061 Condensor assembly kit 220V, endwall, single door 790.00
06011063 Condensor assembly kit 220V, endwall, multiple door 790.00
06010193 Electrical kit for FFU80HAX, 220V (includes relay, cover, OLP and start cap) 25.00
06010050 Motor, evaporator fan, 220 volt, 6 watt 200.00
06001451 Motor, condensor fan, 220V 9 watt 125.00
06011056 Digital thermostat w/probe, preset to standard temp, range 34-40 degrees F 120.00
06011057 Digital thermostat w/probe, preset to red wine temp, range 60-65 degrees F 120.00
06011058 Digital thermostat w/probe, preset to white wine temp, range 50-55 degrees F 120.00
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
OM001
18
Page 20
warranty Statement
APPLICABLE TO ALL PRODUCTS SOLD WITHIN THE UNITED STATES AND CANADA
Glastender, Inc. warrants all products to be free of defects in material and workmanship. One-year labor and parts warranty applies to
all glasswashers, self-contained refrigeration models, and BDS model
bottle disintegration units. In established areas, a start up is included
with GT-24 and GT-30 model glasswashers. Warranty is effective for
one year from the date of installation or up to 18 months from date of
factory shipment, whichever occurs sooner. Glastender, Inc. will replace
any part or assembly found defective under normal use and service.
For warranty labor claims beyond 15 months from the date of factory
shipment, proof of date of installation or occupancy must be provided.
Authorization for labor must be obtained from Glastender within the
warranty period and prior to the service being performed.
Labor warranty applies to the United States and Canada only.
Remote refrigeration models and beer line chillers include a one-year
parts warranty only. There is no labor warranty on these products.
Field replacement parts not covered under the original warranty include
a 90-day part warranty from the date of installation.
FOUR YEAR ADDITIONAL COMPRESSOR WARRANTY:
Glastender will warrant to the original user the compressor for all selfcontained refrigeration models for an additional four years following the
regular one-year warranty period. This plan applies to the compressor
only.
A completed warranty claim form MUST accompany all returned defective parts or assemblies. Upon request, a defective part or assembly must
be returned to Glastender, Inc., Saginaw, Michigan, with all transportation and delivery charges prepaid. Warranty repairs or replacements
will be shipped FOB factory in Saginaw, Michigan. Reimbursement for
applicable freight charges covers ground service only.
Glastender provides in-warranty repairs during a service company’s
regular working days and hours. There is no provision for payment
of a premium rate during “overtime” hours. When warranty service is
requested during other than normal working hours, the end user will be
charged the premium portion of the overtime rate.
The warranty covers substantiated travel expenses for up to 2 hours /
100 miles round trip up to a maximum of $150. Any additional costs
due to installations that require extra work, time, or travel to gain access
for service are the sole responsibility of the equipment purchaser. Any
exceptions to these travel and access limitations must be pre-approved
by a factory representative.
The warranty does not cover door gaskets, chemical tubing, pump
squeeze tubing, and/or any equipment subjected to accidents, freight
damage, alterations from the original design, improper power and/or
plumbing hookups, improper chemical use, general misuse, or lack
of routine required maintenance as determined by Glastender, Inc.
Installation, normal control adjustments, general maintenance, correcting an installation error, or service calls that reveal the unit is functioning normally will not be reimbursed under warranty.
Condenser coils on self-contained refrigeration products must be
cleaned regularly. Failure to provide adequate air flow to a refrigeration
unit will void the warranty.
Glastender shall not be liable for loss of use, revenue, or profit, or for
any other indirect, incidental, special, or consequential damage including, but not limited to, product spoilage or loss.
This warranty is conditioned upon Glastender receiving notice of any
defect subject to this warranty within sixty (60) days of its discovery
by the end user or dealer. All products are warranted only for the initial
place of installation. Removal of a product automatically terminates
this warranty.
19
OM001
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
SECOND YEAR EXTENDED PARTS & LABOR WARRANTY:
Glastender’s one-year parts and labor warranty on self-contained refrigeration units, excluding beer line chillers, can be extended to two years
with the purchase of a two year parts and labor warranty. Specify part
number EWR2 ($150 net price) when ordering.
EXPORT WARRANTY - One year parts only.
EXCLUSION OF WARRANTIES
EXCEPT AS PROVIDED ABOVE, GLASTENDER MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
OR NON-INFRINGEMENT.
LIMITATION OF REMEDIES AND DAMAGES
If Buyer makes a valid and timely claim as outlined above, Glastender’s
liability and Buyer’s remedies under this agreement will be limited solely
to labor charges authorized and/or replacement or credit, at Glastender’s
option, with respect to Products returned at Buyer’s expense within thirty (30) days after warranty repair. GLASTENDER’S LIABILITY WILL
IN NO EVENT BE GREATER IN AMOUNT THAN THE PURCHASE
PRICE OF THE RETURNED PRODUCTS. GLASTENDER
WILL NOT BE LIABLE UNDER ANY CIRCUMSTANCE FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING,
BUT NOT LIMITED TO, LABOR COSTS EXCEPT AS COVERED
UNDER OUR WARRANTY, LOST PROFITS OR THE LOSS OF
PERISHABLE PRODUCTS RESULTING FROM THE USE OF OR
INABILITY TO USE OUR PRODUCTS OR FROM OUR PRODUCTS’
INCORPORATION INTO OR BECOMING A COMPONENT OF
ANY OTHER PRODUCT. NEITHER PARTY WILL HAVE ANY
NEGLIGENCE OR OTHER TORT LIABILITY TO THE OTHER, OR
TO ANY THIRD PARTY, ARISING FROM ANY BREACH OF THIS
AGREEMENT.
GOVERNING LAW - JURISDICTION
The terms and conditions of an order are to be governed and construed
according to the laws of the State of Michigan, without regard to conflict
of laws principles. Buyer hereby consents to the jurisdiction and venue
of the courts located in Saginaw County, Michigan.
No representative, distributor, dealer, or any other person is authorized
to modify this warranty. This warranty replaces all other written or
verbal warranties.
NOTE: Glastender, Inc.’s policy of constant quality improvement
means that prices, specifications, and policies are subject to change
without notice. Questions regarding this warranty should be directed to
Glastender’s Warranty Administrator.
04-19-17
IMPORTANT!!
Attention Service Companies
Please review the important warranty information on this page. If you
believe a service call should be covered by the factory, please call
the factory for authorization between 8AM and 5PM EST, Monday
through Friday.
Page 21
termS and ConditionS
priCeS:
All prices are LIST. Applicable taxes will be added.
quotationS:
Unless otherwise stated, quotations are effective for 30 days only.
aCCeptanCe:
All orders are subject to acceptance by Glastender, Inc.’s headquarters in
Saginaw, Michigan. Possession of the Product Directory and Price List
is not an offer to sell.
ShipmentS:
F.O.B. factory in Saginaw, Michigan. Freight terms are Third Party or
Collect if shipped directly to you. Prepay and Add to Invoice freight
terms are available upon request. The approximate shipping weights of
all products are listed with the prices. Partial shipments will be made
unless otherwise specified by the customer. Surface freight classifications are:
• GT-24/GT-30/GW24 Glasswashers - Class 175
• GT-18 Glasswashers - Class 250
• All Underbar Equipment - Class 175
• Bar Die Orders – Class 250
• Portable Bars - Class 175
• Remote refrigerators (i.e., no compressor) or dry storage back bar
equipment - Class 175
• Self-contained refrigeration equipment - Class 150
• Ice Display Units (IDU and GDU) - Class 85
• Lighted Liquor Displays - Class 85
• Beer line chillers and beer towers (beverage dispensing equipment)
- Class 92.5
• Bottle Disintegration System - Class 150
• Ice Cream Freezers - Class 77.5
delivery:
The majority of equipment is manufactured to order and typically ships
within three to six weeks after complete order information is received by
the factory. In-stock equipment typically ships within two to three days
of the factory receiving complete order information.
returnS:
Items specified as “Manufactured to Order” are NOT returnable.
A Return Authorization number must be issued by the factory in
advance for any items that are returnable. The number MUST be noted
on the outside of the returned package. Returns must be received within
90 days of the issue date. Shipping charges must be prepaid. A minimum 20% restocking charge will be applied to all authorized returns if
received in new, unused condition in the original packaging.
The above conditions apply to spare part returns, except spare part
returns must be received within 30 days of original shipment for electronic or electrical parts or within 90 days for all other parts.
loSS or damage:
For customer routed shipments, Glastender, Inc. is not responsible for
any loss, damage, or delay of merchandise during shipment. Such transit
claims must be filed with the carrier. Merchandise must be examined on
arrival. If shortages occur, Glastender, Inc. must be notified in writing
within five (5) days of delivery to honor any shortage claim. Glastender
will assume responsibility for freight claims on Prepay and Add shipments but the customer must inspect freight and note any damage upon
receipt. Failure to do so may result in losses at the customer’s expense.
CuStom orderS:
Custom orders must be paid in advance and are not subject to cancellation.
All small items are evaluated to see the most cost effective means for
shipment. Many small items ship via UPS or FedEx; however, when
dimensional weight is excessive, LTL carriers are the most cost effective
choice. Spare parts orders received before 1:00 PM EST can usually be
shipped the same day.
The order department is happy to assist with routing or shipping questions.
payment termS:
Cash should be included with all orders unless credit terms have been
arranged. To establish credit, banking and trade references are required.
A convenient credit application is available upon request. Payment via
credit card is not our normal means of receiving payment. Visa and
MasterCard will be accepted, but must be charged at the time of shipment. In addition, a payment via credit card for orders totaling more than
$500 will incur a 3% convenience fee on the total transaction amount.
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
laminateS:
Some products include common, readily available plastic laminates of
the customer’s selection. There may be an additional charge if uncommon varieties are ordered.
12/14/17
OM001
20
Loading...