Glastender KC24-N1-BS2-L User Manual
A family company manufacturing in the USA
5-15P
www.glastender.com
Project:
Item #: Qty:
AIA#
SIS#
Model #:
24" Keg Cooler
One Door Self-Contained
KC24-N_-_ S _ (_)
Conforms to NSF/ANSI STD 7
4004503
and UL STD 471
Certied to CSA STD C22.2 No. 120
Meets NSF 7 requirements for
closed container products
KC24-NC-BS2(L)
Shown with optional 2-faucet column
tower for use with 1/6 barrel mini kegs*
Standard Features
• Self-contained with six foot grounded cord and plug
• Stainless steel die cast handle with lock
• Galvanized steep interior construction with stainless steel
oor
• Stainless steel keg rack and 1/2" thick ABS plastic
threshold scuff platt
• Foamed-in-place insulation
Specications
Base Height:
1 = 1"
C = 2"Casters
6 = 6"Legs
Door Style:
B = Black vinyl-clad
S = Stainless
Door Hinge Location:
L = Left or R = Right
Tower Style:
1 = One Faucet
2 = Two Faucets
3 = Three Faucets
Top Style:
S = Stainless
* NOTE: 1/6 barrel keg availability varies by region. Please
consult your local distributor before ordering. Low
profile keg taps, which only fit domestic style kegs,
must be used for the 2nd and 3rd keg.
• Stainless steel nished top with recessed drain pan and lift-out
perforated inserts
• Stainless steel 1-faucet column tower and optional two or
three faucets for use with 1/6 kegs*
• Pre-plumbed plastic drain bottle for drain pan waste
• Black vinyl-clad steel exterior front and sides
• Forced air evaporator with blower hose for cooling column
tower
Electrical
• 120V, 1 phase, 60 Hz, 3.6 full load amps
• Dedicated 15 amp circuit is required
• Includes a 6 foot NEMA 5-15P grounded
cord and plug which exits the bottom rear
Refrigeration
• 1/6 HP, R134a refrigerant
• 1,146 BTU/hr heat rejection
Operating Range
• 34°F (1°C) to 40°F (4°C)
Plumbing
• Automatic condensate evaporator. No drain connection
required.
• Includes a pre-plumbed plastic bottle for drain pan waste. A
knock-out hole is provided if external draining is required.
Capacity
• One 1/4 barrel keg (7-3/4 gal.) or one 1/2 barrel keg (15-1/2
gal.) or three 1/6 barrel kegs (5 gal.)*
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
G
W
4.11
Materials
• 22 gauge stainless steel parts include: interior oor, front of
cabinet, and evaporator housing
• 22 gauge black vinyl-clad parts include: sides and standard door
• 22 gauge galvanized steel parts include: exterior sub-top and back
and interior walls and ceiling
• 20 gauge stainless steel parts include: keg rack, nished top, drain
pan inserts, and tower
• 16 gauge stainless steel parts include: legs
• 16 gauge galvanized steel parts include: base
• 16 gauge zinc plated CR steel parts include: leg sockets
• 12 gauge stainless steel parts include: hinges, hinge brackets, and
lock brackets
Approval/Notes:
Rev. 08-01-16
One Door 24″ Self-Contained Keg Cooler
FRONT VIEW
PLAN VIEW
WITH 2" CASTERS
SHOWN WITH OPTIONAL
Dimensional Information
MINIMUM CLEARANCE FOR AIR FLOW
WARNING
COMPRESSOR FAILURE DUE TO
RESTRICTION OR BLOCKAGE OF
AIR FLOW WILL VOID WARRANTY.
SHOWN WITH OPTIONAL 2-FAUCET
COLUMN TOWER FOR USE WITH
1/6 BARREL MINI KEGS
COLUMN TOWER FOR USE WITH
COMPRESSOR
COMPARTMENT
2-FAUCET
1/6 BARREL MINI KEGS
1 1/2"
10 1/4"
8"
AIR FLOW
8 1/2"
11 3/8"
13 15/16"
24"
21"
8"
16 1/4"
10"
6"
3"
SIDE VIEWS
EVAPORATO R
HOUSING
29 3/4"
48"
22 3/4"
25 1/4"
DOOR
OPENING
21"
36"
EVAPORATO R
HOUSING
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
7 1/8"
30 3/4"
24"
21"
24"
38 1/2"
COMPRESSOR
COMPARTMENT
180°
SWING
WITH OPTIONAL 6" LEGS
22 1/2"
36"
2 3/8"
6"
4 1/2"4 1/2"
Printed in USA
Loading...