Glastender KC24 Specifications
Project:
Item #: Qty:
AIA#
SIS#
Model #:
24" Keg Cooler
One Door Self-Contained
KC24-N_-_ S _ (_)
KC24-NC-BS2(L)
Shown with optional 2-faucet column
tower for use with 1/6 barrel mini kegs*
Standard Features
• Self-contained with six-foot grounded cord and plug
• Galvanized steel interior construction with stainless steel
floor
• Stainless steel keg rack and 1/2″ thick ABS plastic
threshold scuff plate
• Foamed-in-place insulation
• Stainless steel finished top with recessed drain pan and
lift-out perforated inserts
Specications
Base Height:
1 = 1"
C = 2"Casters
6 = 6"Legs
Door Style:
B = Black vinyl-clad
S = Stainless
Door Hinge Location:
L = Left or R = Right
Tower Style:
1 = One Faucet
2 = Two Faucets
3 = Three Faucets
Top Style:
S = Stainless
* NOTE: 1/6 barrel keg availability varies by region. Please
consult your local distributor before ordering. Low
profile keg taps, which only fit domestic style kegs,
must be used for the 2nd and 3rd keg.
• Stainless steel 1-faucet column tower and optional two or
three faucets for use with 1/6 kegs*
• Pre-plumbed plastic drain bottle for drain pan waste
• Black vinyl-clad steel exterior front and sides
• Chain included for securing optional CO2 bottle
• Forced air evaporator with blower hose for cooling column
tower
Electrical
• 120V, 1 phase, 60 Hz, 3.6 full load amps
• Dedicated 15 amp circuit is required
• Includes a 6-foot grounded cord and plug which exits the
bottom rear
Refrigeration
• 1/6 HP, R134a refrigerant
Operating Range
• 34º F to 40º F
Plumbing
• Automatic condensate evaporator. No drain connection
required
• Includes a pre-plumbed plastic bottle for drain pan waste.
A knock-out hole is provided if external draining is required.
Capacity
• One 1/4 barrel keg (7-3/4 gal.) or one 1/2 barrel keg
(15-1/2 gal.) or three 1/6 barrel kegs (5 gal.)*
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
4.11
Materials
• 22 gauge, stainless steel parts include: interior floor, front of
cabinet, and evaporator housing
• 22 gauge black vinyl-clad parts include: sides and
standard door
• 22 gauge galvanized steel parts include: exterior sub-top and back
and interior walls and ceiling
• 20 gauge stainless steel parts include: keg rack, finished top, drain
pan inserts, and tower
• 16 gauge stainless steel parts include: legs
• 16 gauge galvanized steel parts include: base
• 16 gauge zinc plated CR steel parts include: leg sockets
• 12 gauge stainless steel parts include: hinges,
hinge brackets, and lock brackets
Approval/Notes:
Rev. 08-11-09
One Door 24″ Self-Contained Keg Cooler
FRONT VIEW
PLAN VIEW
SHOWN WITH OPTIONAL
Dimensional Information
MINIMUM CLEARANCE FOR AIR FLOW
WARNING
COMPRESSOR FAILURE DUE TO
RESTRICTION OR BLOCKAGE OF
AIR FLOW WILL VOID WARRANTY.
SHOWN WITH OPTIONAL 2-FAUCET
COLUMN TOWER FOR USE WITH
1/6 BARREL MINI KEGS
COLUMN TOWER FOR USE WITH
COMPRESSOR
COMPARTMENT
2-FAUCET
1/6 BARREL MINI KEGS
1 1/2"
10 3/16"
8"
AIR FLOW
8 1/2"
11 1/2"
13 15/16"
24"
21"
8"
16 1/4"
10"
6"
3"
SIDE VIEWS
EVAPORATOR
HOUSING
29 3/4"
48"
22 3/4"
25 1/4"
DOOR
OPENING
21"
36"
EVAPORATOR
HOUSING
COMPRESSOR
7 1/8"
30 3/4"
24"
21"
24"
38 1/2"
COMPARTMENT
WITH 2" CASTERS
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
180°
SWING
WITH OPTIONAL 6" LEGS
22 1/2"
36"
2 3/8"
6"
4 1/2"4 1/2"
Printed in USA
Loading...