Glastender IBA-18 User Manual
A family company manufacturing in the USA
www.glastender.com
IBA-24
Project:
Item #: Qty:
AIA#
SIS#
Model #:
Ice Bins
See reverse side for model number key
Standard Features
• All stainless steel construction
• One-piece, seamless top and backsplash
• PVC plastic breaker strip around ice bin liner: creates 5/16″
raised edge around liner, acts as thermal barrier to prevent
heat transfer, and makes the cover slide easier.
• Tubing chase available centered in backsplash of 12″ and
larger models. Specify accessory model #TC-BS.
• Available in 6″ incremental lengths from 6″ to 48″
• 24″ deep version provides larger ice bin not just a deck exten-
sion on the back of the 19″ deep model
• Sliding stainless steel cover
• CFC free foamed-in-place insulation
• Adjustable stainless steel bullet feet
• Ten circuit available with all 24″ and wider models (add
suffix ‘-CP10’ to model number )
• Extra deep version is optional (add suffix ‘-ED’ to model
number)
TC-BS Accessory
4004503
Conforms to ANSI/NSF STD 2
To view underbar installation instructions, please visit: http://www.glastender.com/PDF/F-750-165_Underbar_Installation_Instructions.pdf
To view cleaning and care instructions, please visit: http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf
Specications
Drain
• Non-cold plate model: 1-1/2″ tailpiece
• Ten circuit cold plate model ‘-CP10’: 3/4″ MPT
Tubing Chase in Backsplash (Optional)
• 2-3/8″ by 4″ hole centered in backsplash
Cover
• Two-piece sliding cover, 20 gauge stainless steel,
included with all models
Cold Plate (Models with ‘-CP10’ suffix)
• Ten circuit available with all 24″ and wider models
• Connectionis5/16″O.D.stainlesssteeltubingwith
swaged end
Liner Depth
• 10-1/2″ standard
• 14-1/2″ for extra deep models
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
Ice Capacity
• “A” depth standard = 2.79 lbs X length
• “A” depth extra deep = 3.85 lbs X length
• “B” depth standard = 3.54 lbs X length
• “B” depth extra deep = 4.89 lbs X length
Legs
• 1-5/8″ diameter 16 gauge stainless steel
• Stainless steel bullet feet
Materials
• 20 gauge stainless steel
• PVC plastic breaker strip around opening of ice bin liner
Approval/Notes:
3.01
Rev. 12-07-16
Ice Bins
37"
Dimensional Information
“A” Depth-19″ Deep Models
15"
PLAN VIEW
BACKSPLASH
19"
SLIDING COVER
OVERALL
LENGTH
7"
OPTIONAL
SPEED RAIL
30"
16"
1" ADJUSTABLE
BULLET FEET
SIDE ELEVATION FRONT ELEVATION
“B” Depth-24″ Deep Models
10 1/2"
19"
Model Number Overall Length
IBA-6* 6"
IBA-12 12"
IBA-18 18"
IBA-24 24"
IBA-30 30"
IBA-36 36"
IBA-42 42"
IBA-48 48"
* Note: 6" unit cannot be free standing
BACKSPLASH
24"
SIDE ELEVATION
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
PLAN VIEW
SLIDING COVER
OPTIONAL
SPEED RAIL
30"
16"
1" ADJUSTABLE
BULLET FEET
20"
OVERALL
LENGTH
7"
10 1/2"
FRONT ELEVATION
24"
37"
Model Number Overall Length
IBB-6* 6"
IBB-12 12"
IBB-18 18"
IBB-24 24"
IBB-30 30"
IBB-36 36"
IBB-42 42"
IBB-48 48"
* Note: 6" unit cannot be free standing
Printed in USA
Loading...