Glastender GW-24 Specifications

A family company manufacturing in the USA
GW24
Shown with sliding door
closed
Project:
Item #: Qty:
AIA#
SIS#
GW24 Rotary Glasswasher
24" wide by 24" deep Rotary Glasswasher
Standard Features
• Fill and dump style cycle uses less water and energy than traditional rotary glasswashers.
• Unit plugs into standard 120V electrical outlet for an easy installation.
• Computer controlled ll cycle allows for 75°F (24°C) rinse, providing clean glasses that are cool to the touch.
• The sliding cover and cold water rinse prevent steam from escaping during and after the cycle.
• Unique drainboard top provides integrated glassware landing area.
• Exclusive design with side notch provides space for three one-gallon chemical containers within the 24" by 24" foot print.
• Conveyor advance switch rotates conveyor one-half turn for easy loading and unloading of glassware.
• Covers and drainboard top are easily removable for cleaning access.
• Pre-programmed de-liming cycle for easy removal of mineral deposits during maintenance (de-liming agent must be added).
• Conveyor and stationary spray box are easily removed for cleaning and visual inspection.
• Automatic peristaltic metering pumps accurately dispense detergent, sanitizer, and rinse aid.
Specications
General Plumbing [Hot water and cold water required]
• Plumb with 1/2" water supply. Adapt to 3/8" FMPT.
• Minimum water pressure is 25 PSI
• Maximum water pressure is 100 PSI. Install water pressure regu­lator if line pressure is over 100 PSI. Water valve on unit has built-in strainer and flow control to provide consistent volume between 25 and 100 PSI
• Install separate water shut-off valve
• Unit has built-in air gap - vacuum breaker is not required
• Consumption is 3 gallons per cycle
Hot Water Supply
• Maximum temperature is 150ºF (66ºC)
• Minimum temperature is 130ºF (54ºC)
Cold Water Supply
• No minimum temperature requirement
Drain
• 1-1/2" tailpiece.
• Use open type floor drain for maximum drainage
Electrical
• 120V, single phase, 60Hz, 6-foot grounded cord included
• Dedicated 15 amp circuit recommended
• Power requirements - 3.5 amps
Detergent*
• Extra heavy duty, non-foaming, commercial liquid dishwashing detergent is required - .30% concentration
• Consult local chemical supplier to match detergent with local water conditions
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
1.12
Sanitizer*
• Liquid chlorine bleach (sodium hypochlorite - 5.25% solution) adjusted to 50 ppm
Rinse Aid*
• Liquid Rinse Aid adjusted for proper sheeting
Operation / Capacity
• 120°F (49ºC) minimum wash temp and rinse temp adjustable down to 75°F (24ºC)
• 2 minute 15 second cycle
• 41 glasses† per cycle
• Maximum glass height 10"
Materials
• 20 gauge stainless steel parts include: cabinet
• 18 gauge stainless steel parts include: floor and tanks
• 16 gauge stainless steel parts include: leg mounting brackets and legs
• 11 gauge stainless steel parts include: drive wheel
Service Access
• Front panel must remain accessible for service
* Detergent, Sanitizer, and Rinse Aid containers are stored externally.
The side cut-out in the machine provides space for three one-gallon chemical containers within the 24" by 24" foot print of the machine.
† Based on 2-3/4" diameter bar glasses
Approval/Notes:
Rev. 03-30-11
GW24 Rotary Glasswasher
Accessories
bottle rack - 01001500
Dimensional Information
Part No. DescriPtioN
01001500 Slide-out chemical bottle rack
01001525 Low level detection, sanitizer
01001526 Low level detection, sani & detergent
01001527 Low level detect, sani, det, & rinse aid
01001541 Export transformer 220V/50Hz electrical
-NOTE: Eliminates side notch
Slide-out chemical
24"
10-3/32"
Sliding Door Open
14.75"
24"
PLAN VIEW
7"
Mechanicals
Note: 1. In all cases, consult local plumbing, electrical and health codes for
regulations which may not be consistent with the information on the front of this specification sheet
2. The utility connections are made from the floor at the bottom of the unit approximately 7" to 8" high.
3. The Glastender policy of constant quality improvement means specifications are subject to change without notice.
1 = DRAIN
2 = HOT WATER
3 = COLD WATER
4 = ELECTRICAL
30"
6"
FRONT VIEW SIDE VIEW
24"
7"
24"
10.625"
5"
4.312"
2
3
10.5"
7.5" 4
1
15.531"
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com
9"
Printed in USA
Loading...