Glastender GT-18+1L Parts Manual
ParTs DIreCTory
GT-18, GT-18+1, GT-18+1L,
GT-18+1r, GT-18+2, GT-18+2-IC
GLasswashers (Manufactured after October 1, 1994 with motor driven drain stopper)
Rev. 01-09-18
GT-18+2
GT-18
Glastender, Inc. · 5400 North Michigan Road · Saginaw, MI · 48604-9780
800.748.0423 · 989.752.4275 · Fax 989.752.4444 · www.glastender.com
© 2010 Glastender, Inc.
InDex
Terms and Conditions ..................1
Warranty.............................2
Interior and Exterior Components ....... 3-4
Tops and Curtains ................... 5-6
Electrical Components................ 7-8
Recirculating Pump and Related Parts .. 9-12
Terms anD ConDITIons
PrICes:
All prices are LIST. Applicable taxes will be added.
QuoTaTIons:
Unless otherwise stated, quotations are effective for 30 days only.
aCCePTanCe:
All orders are subject to acceptance by Glastender, Inc.’s headquarters in
Saginaw, Michigan. Possession of the Product Directory and Price List
is not an offer to sell.
shIPmenTs:
F.O.B. factory in Saginaw, Michigan. Freight terms are Third Party or
Collect if shipped directly to you. Prepay and Add to Invoice freight
terms are available upon request. The approximate shipping weights of
all products are listed with the prices. Partial shipments will be made
unless otherwise specified by the customer. Surface freight classifications are:
• GT-24/GT-30/GW24 Glasswashers - Class 175
• GT-18 Glasswashers - Class 250
• All Underbar Equipment - Class 175
• Bar Die Orders – Class 250
• Portable Bars - Class 175
• Remote refrigerators (i.e., no compressor) or dry storage back bar
equipment - Class 175
• Self-contained refrigeration equipment - Class 150
• Ice Display Units (IDU and GDU) - Class 85
• Lighted Liquor Displays - Class 85
• Beer line chillers and beer towers (beverage dispensing equipment)
- Class 92.5
• Bottle Disintegration System - Class 150
• Ice Cream Freezers - Class 77.5
All small items are evaluated to see the most cost effective means for
shipment. Many small items ship via UPS or FedEx; however, when
dimensional weight is excessive, LTL carriers are the most cost effective
choice. Spare parts orders received before 1:00 PM EST can usually be
shipped the same day.
The order department is happy to assist with routing or shipping questions.
PaymenT Terms:
Cash should be included with all orders unless credit terms have been
arranged. To establish credit, banking and trade references are required.
A convenient credit application is available upon request. Payment via
credit card is not our normal means of receiving payment. Visa and
Peristaltic Pump, Chemical Tubing,
and Related Parts .................. 13-14
Drive Assembly Components ........ 15-16
Plumbing Components.............. 17-18
Recommended Spare Parts Inventory .....19
Parts Order Form .....................20
MasterCard will be accepted, but must be charged at the time of shipment. In addition, a payment via credit card for orders totaling more than
$500 will incur a 3% convenience fee on the total transaction amount.
DeLIvery:
The majority of equipment is manufactured to order and typically ships
within three to six weeks after complete order information is received by
the factory. In-stock equipment typically ships within two to three days
of the factory receiving complete order information.
reTurns:
Items specified as “Manufactured to Order” are NOT returnable.
A Return Authorization number must be issued by the factory in
advance for any items that are returnable. The number MUST be noted
on the outside of the returned package. Returns must be received within
90 days of the issue date. Shipping charges must be prepaid. A minimum 20% restocking charge will be applied to all authorized returns if
received in new, unused condition in the original packaging.
The above conditions apply to spare part returns, except spare part
returns must be received within 30 days of original shipment for electronic or electrical parts or within 90 days for all other parts.
Loss or DamaGe:
For customer routed shipments, Glastender, Inc. is not responsible for
any loss, damage, or delay of merchandise during shipment. Such transit
claims must be filed with the carrier. Merchandise must be examined on
arrival. If shortages occur, Glastender, Inc. must be notified in writing
within five (5) days of delivery to honor any shortage claim. Glastender
will assume responsibility for freight claims on Prepay and Add shipments but the customer must inspect freight and note any damage upon
receipt. Failure to do so may result in losses at the customer’s expense.
CusTom orDers:
Custom orders must be paid in advance and are not subject to cancellation.
LamInaTes:
Some products include common, readily available plastic laminates of
the customer’s selection. There may be an additional charge if uncommon varieties are ordered.
12/14/17
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
1
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
warranTy sTaTemenT
APPLICABLE TO ALL PRODUCTS SOLD WITHIN THE UNITED STATES AND CANADA
Glastender, Inc. warrants all products to be free of defects in material and workmanship. One-year labor and parts warranty applies to
all glasswashers, self-contained refrigeration models, and BDS model
bottle disintegration units. In established areas, a start up is included
with GT-24 and GT-30 model glasswashers. Warranty is effective for
one year from the date of installation or up to 18 months from date of
factory shipment, whichever occurs sooner. Glastender, Inc. will replace
any part or assembly found defective under normal use and service.
For warranty labor claims beyond 15 months from the date of factory
shipment, proof of date of installation or occupancy must be provided.
Authorization for labor must be obtained from Glastender within the
warranty period and prior to the service being performed.
Labor warranty applies to the United States and Canada only.
Remote refrigeration models and beer line chillers include a one-year
parts warranty only. There is no labor warranty on these products.
Field replacement parts not covered under the original warranty include
a 90-day part warranty from the date of installation.
FOUR YEAR ADDITIONAL COMPRESSOR WARRANTY:
Glastender will warrant to the original user the compressor for all selfcontained refrigeration models for an additional four years following the
regular one-year warranty period. This plan applies to the compressor
only.
A completed warranty claim form MUST accompany all returned defective parts or assemblies. Upon request, a defective part or assembly must
be returned to Glastender, Inc., Saginaw, Michigan, with all transportation and delivery charges prepaid. Warranty repairs or replacements
will be shipped FOB factory in Saginaw, Michigan. Reimbursement for
applicable freight charges covers ground service only.
Glastender provides in-warranty repairs during a service company’s
regular working days and hours. There is no provision for payment
of a premium rate during “overtime” hours. When warranty service is
requested during other than normal working hours, the end user will be
charged the premium portion of the overtime rate.
The warranty covers substantiated travel expenses for up to 2 hours /
100 miles round trip up to a maximum of $150. Any additional costs
due to installations that require extra work, time, or travel to gain access
for service are the sole responsibility of the equipment purchaser. Any
exceptions to these travel and access limitations must be pre-approved
by a factory representative.
The warranty does not cover door gaskets, chemical tubing, pump
squeeze tubing, and/or any equipment subjected to accidents, freight
damage, alterations from the original design, improper power and/or
plumbing hookups, improper chemical use, general misuse, or lack
of routine required maintenance as determined by Glastender, Inc.
Installation, normal control adjustments, general maintenance, correcting an installation error, or service calls that reveal the unit is functioning normally will not be reimbursed under warranty.
Condenser coils on self-contained refrigeration products must be
cleaned regularly. Failure to provide adequate air flow to a refrigeration
unit will void the warranty.
Glastender shall not be liable for loss of use, revenue, or profit, or for
any other indirect, incidental, special, or consequential damage including, but not limited to, product spoilage or loss.
This warranty is conditioned upon Glastender receiving notice of any
defect subject to this warranty within sixty (60) days of its discovery
by the end user or dealer. All products are warranted only for the initial
place of installation. Removal of a product automatically terminates
this warranty.
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
SECOND YEAR EXTENDED PARTS & LABOR WARRANTY:
Glastender’s one-year parts and labor warranty on self-contained refrigeration units, excluding beer line chillers, can be extended to two years
with the purchase of a two year parts and labor warranty. Specify part
number EWR2 ($150 net price) when ordering.
EXPORT WARRANTY - One year parts only.
EXCLUSION OF WARRANTIES
EXCEPT AS PROVIDED ABOVE, GLASTENDER MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
OR NON-INFRINGEMENT.
LIMITATION OF REMEDIES AND DAMAGES
If Buyer makes a valid and timely claim as outlined above, Glastender’s
liability and Buyer’s remedies under this agreement will be limited solely
to labor charges authorized and/or replacement or credit, at Glastender’s
option, with respect to Products returned at Buyer’s expense within thirty (30) days after warranty repair. GLASTENDER’S LIABILITY WILL
IN NO EVENT BE GREATER IN AMOUNT THAN THE PURCHASE
PRICE OF THE RETURNED PRODUCTS. GLASTENDER
WILL NOT BE LIABLE UNDER ANY CIRCUMSTANCE FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING,
BUT NOT LIMITED TO, LABOR COSTS EXCEPT AS COVERED
UNDER OUR WARRANTY, LOST PROFITS OR THE LOSS OF
PERISHABLE PRODUCTS RESULTING FROM THE USE OF OR
INABILITY TO USE OUR PRODUCTS OR FROM OUR PRODUCTS’
INCORPORATION INTO OR BECOMING A COMPONENT OF
ANY OTHER PRODUCT. NEITHER PARTY WILL HAVE ANY
NEGLIGENCE OR OTHER TORT LIABILITY TO THE OTHER, OR
TO ANY THIRD PARTY, ARISING FROM ANY BREACH OF THIS
AGREEMENT.
GOVERNING LAW - JURISDICTION
The terms and conditions of an order are to be governed and construed
according to the laws of the State of Michigan, without regard to conflict
of laws principles. Buyer hereby consents to the jurisdiction and venue
of the courts located in Saginaw County, Michigan.
No representative, distributor, dealer, or any other person is authorized
to modify this warranty. This warranty replaces all other written or
verbal warranties.
NOTE: Glastender, Inc.’s policy of constant quality improvement
means that prices, specifications, and policies are subject to change
without notice. Questions regarding this warranty should be directed to
Glastender’s Warranty Administrator.
04-19-17
IMPORTANT!!
Attention Service Companies
Please review the important warranty information on this page. If you
believe a service call should be covered by the factory, please call
the factory for authorization between 8AM and 5PM EST, Monday
through Friday.
2
InTerIor anD exTerIor ComPonenTs
1
5
6
3
2
7
9
12
8
10
4
16
22
21
13
14
15
11
17
19
18
23
20
3
Front View
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
Front View
InTerIor anD exTerIor ComPonenTs
ParT no. oLD ParT no. DesCrIPTIon PrICe
1. 01000567 GT-034404 Drive wheel $66.00
2. 01000532 GT-032900 Rack, glass 52.00
3. 01000533 GT-032901 Rack, dish 96.00
4. 01000536 GT-032911 Glass rack insert for stemware 135.00
5. 01000667 GT-036509 Spray box 156.00
6. 01000472 GT-031306 Gasket, spray box 6.00
7. 01000530 GT-032305 Guard, splash, GT-18, GT-18+1, GT-18+2 48.00
01000319 Guard, splash, GT-18+1L, GT-18+1R 48.00
8. 01000683 GT-037109 Drain tank 270.00
9. 01000479 GT-031510 Bracket, front tank mounting 4.00
10. 00000041 GT-038746 Bolt, drain tank mounting, 1/4”-20 x 5/8”, hex head .50
(4 required)
06001545 GT-037008 Washer, flat, drain tank mounting, 1/4”-20 (8 required) .50
01000643 GT-036003 Lockwasher, split, drain tank mounting, 1/4” (8 required) .50
11. 01000620 GT-035711 Nut, drain tank mounting, overflow channel cover mounting, .50
1/4”-20, zinc
12. 01000646 GT-036145 Cover, overflow channel 15.00
13. 01000647 GT-036146 Cover, drain tank mist 12.00
14. 00000030 GT-038728 Screw, drain tank mist cover, drill kwik, 10 x 1/2” 1.00
15. 01000682 GT-037108 Tank, complete (includes all welded components) 1,215.00
16. 01000705 GT-037706 Floor 240.00
17. 01000625 GT-035800 Panel, back 90.00
18. 01000626 GT-035801 Panel, right side 90.00
19. 01000627 GT-035802 Panel, left side 90.00
20. 01000640 GT-035819 Panel, front 72.00
21. 01000639 GT-035818 Panel, switch (decal not included) 36.00
22. 01001233 Decal, switch panel (after 09/14) 15.00
01000499 GT-031636 Decal, switch panel (prior to 09/14) 15.00
23. 00000031 GT-038729 Screw, exterior, back and side panels, 10-24 x 1/2”, 1.00
PPH, SMS, 410 SS (9 required)
00000039 GT-038744 Screw, exterior, switch and front panel, 10-32 x 3/8”, .50
phillips, TH, MS (4 required)
01000641 GT-036000 Washer, star, #6 .50
00000026 GT-035701 Nut, switch panel mounting, 8-32 .50
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
4
ToPs anD CurTaIns
12
4
10
6
1
14
9
17
8
13
5
18
3
10
11
GT-18+1 Top Shown Above
16
10
2
7
15
19
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
5
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
ToPs anD CurTaIns
ParT no. oLD ParT no. DesCrIPTIon PrICe
1. 01000721 GT-038110 Top, GT-18, LESS door $648.00
2. 01000722 GT-038111 Top, GT-18+1, LESS door and curtains 1,080.00
3. 01000724 GT-038118 Top, GT-18+1L, with drain table, LESS door, curtain and legs 1,308.00
01000725 GT-038119 Top, GT-18+1R, with drain table, LESS door, curtain and legs 1,308.00
4. 01000723 GT-038112 Top, GT-18+2, LESS curtains and drain table 780.00
5. 01000726 GT-038120 Top, GT-18+2-IC, LESS curtains and drain table 900.00
6. 01000649 GT-036200 Door, GT-18 168.00
7. 01000651 GT-036247 Door, GT-18+1L 180.00
01000652 GT-036248 Door, GT-18+1R 180.00
8. 00000027 GT-038723 Screw, door, 10-32 x 1/2” (2 required) .50
06001485 GT-036012 Washer, flat, door screw, white nylon (2 required) 1.00
01000873 GT-035709 Locknut, door screw 10-32, (2 required) 1.00
9. 01000495 GT-031627 Decal, operation 10.00
10. 01000657 GT-036310 Curtain, end, GT-18+1, GT-18+1L, GT-18–1R, 35.00
(1 required), GT-18+2, and GT-18+2-IC (2 required)
11. 01000658 GT-036311 Curtain, inside, GT-18+1 30.00
12. 01000707 GT-037802 Drain table, GT-18+2 (no leg sets required) 1,164.00
13. 01000712 GT-037810 Drain table, LESS leg set, GT-18+2-IC 1,338.00
14. 06001545 GT-037008 Washer, flat, hand screw, 1/4” (4 required) .50
00000028 GT-038724 Screw, hand, drain table mounting, 1/4”-20 x 3/4”, GT-18+2, 5.00
and GT-18+2-IC (2 required)
15. 01000258 GT-031511 Bracket, GT-18+1, left, top support (viewing from back) 24.00
01000309 Bracket, GT-18+1, right, top support (viewing from back) 24.00
00000041 GT-038746 Bolt, top support bracket mounting, 1/4”-20 x 5/8” HWH .50
16. 01000686 GT-037316 Leg set, drain table support, GT-18+1L, GT-18+1R, 123.00
and GT-18+2-IC
aCCessorIes
17. 01000710 GT-037805 Clip-on chemical rail (holds 3 one-gallon containers) 215.00
01000706 GT-037801 Glass rack holder for GT-18+1 271.00
18. 01000709 GT-037804 Glass rack holder with shelf for GT-18+1L, GT-18+1R, 708.00
and GT-18+2
01000708 GT-037803 Glass rack holder LESS shelf for GT-18+1L, GT-18+1R, 549.00
and GT-18+2
19. GT-CA3 GT-CA3 Three product chemical alarm (for remote installation) 375.00
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
6
Loading...