Glastender GDU-12X, GDU-16X, GDU-18X, GDU-24X General Manual
Project:
Item #: Qty:
AIA#
SIS#
Model #:
Glass Ice Display
Units
GDU-12X * , GDU-16X * , GDU-18X * , GDU-24X *
* Reflects length of unit in inches from the following options:
24, 30, 36, 42, 48, 54, 60, 66, 72, 78, 84, 90, 96, 102, or 108
Standard Features
Factory mounted on cooler cabinet
GDU-18x42
Field Installed Version
GDU-16x48
Specications
Drains
• 1″ tailpiece - exits through the bottom.
• For factory mounted units on self-contained coolers
the plumbing is ran through the cooler and stubs
out beneath the compressor compartment. Field
connections must be made at that point.
• For factory mounted units on remote coolers or dry
storage cabinets, the factory supplies a 1
and two elbows for running the drain line out of the
cabinet. If the desired location for the drain line
exit is specified, it will be hooked-up at the factory.
Field connections must be made at that point.
″ drain line
• Stainless steel foamed-in-place insulated end panels (units
larger than 54″ include center partition)
• Field installed units include a stainless steel foamed-in-place
insulated drain pan to mount to existing counter top
• Factory installed units include a special stainless steel
foamed-in-place insulated cooler top with built-in drain pan
Double pane glass front and back panels with stainless steel trim
•
• 1/2″ tall perforated stainless steel bottom inserts
NOTE: Glass ice display units merchandise bottled beverages and may be
factory mounted to the top of Glastender Back Bar, Narrow Door,
Low Pofile, Pass Thru, Front Venting, and Rear Feed Coolers,
and Dry Storage Cabinets. Glass Ice Display Units ordered for
field installation include a special insulated stainless drain pan
that mounts to a countertop.
Materials
• 20 gauge stainless steel parts include: sides, center
partition, bottom inserts, glass trim pieces, and
cooler top or field installed drain pan
• 1/2″ thick double pane glass parts include: front
and back panels
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
4.22
Approval/Notes:
Rev. 05-23-05
Glass Ice Display Units
SIDE VIEWS
FRONT VIEWS
COOLER CABINET
COOLER CABINET
COOLER CABINET
COOLER CABINET
1 1/2"
11 1/2"
12 1/4"
9"
8 1/4"
1 1/2"
15 1/2"
9"
6 1/4"
17 1/2"
1 1/2"
9"
1 1/4"
22 1/2"
1 1/2"
9"
1 1/2"
1 1/2"
1 1/2"
1 1/2"
1"
11 1/2"
1"
2"
13 1/2"
15 1/2"
1" 1"
2"
17 1/2"
17 1/2"
1" 1"
2"
19 1/2"
22 1/2"
1" 1"
2"
24 1/2"
12" Deep GDU
Mounted on
Cooler at Factory
12" Deep GDU
with Field Installed
Drain Pan
16" Deep GDU
Mounted on
Cooler at Factory
16" Deep GDU
with Field Installed
Drain Pan
18" Deep GDU
with Field Installed
Drain Pan
18" Deep GDU
Mounted on
Cooler at Factory
24" Deep GDU
Mounted on
Cooler at Factory
24" Deep GDU
with Field Installed
Drain Pan
24" to 54" 60" to 108"
2"
9
11"
2"
11"
9"
1"
1" 2"
STAINLESS FRAME
ON GLASS PANEL
FIELD INSTALLED
DRAIN PAN
STAINLESS CENTER
PARTITION
FIELD INSTALLED
DRAIN PAN
STAINLESS
END PANEL
6"
1" DRAIN
1" DRAIN
6"
The front views below apply to GDU models that have a field installed drain pan. The stainless steel ends and
glass front and rear panels for each Glass Display Unit can be broken down for cleaning. The stainless steel
panels and the field installed drain pan are foamed-in-place insulated. Models larger than 54" wide have a 2"
wide stainless steel center partition that breaks up the front and rear glass panels.
Dimensional Information
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
Loading...