Glastender DSRC-24 User Manual

Download

Page 1

A family company manufacturing in the USA

www.glastender.com

SSR-24

4004503

Conforms to ANSI/NSF STD 2

DSR-24

Project:

Item #: Qty:

AIA#

SIS#

Model #:

Speed Rails &

Locking Covers

(model numbers on reverse side)

Standard Features

• All stainless steel construction

• Open step-and-rail design for easy cleaning and better view of bottles

• Radius corners on steps and rails for easy cleaning

• PVC sound deadening covers

• Long underbar skirt allows speed rails to mount low enough that bottles do not rise above deck surface and inhibit workflow

• Single and double step models

• Locking covers are available (see reverse side for model

numbers)

• Locking covers for single speed rails include built-in storage hangers when ordered with original equipment

• Availableincustomlengthsupto84″

• Rails have a clear snap-on liquor identification label cover

To view cleaning and care instructions, please visit: http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf

Specications

Materials

• 20 gauge stainless steel parts include: steps, rails, and locking covers

• 14 gauge stainless steel parts include: ends

• PVC step and rail covers

SSR-36 with

SSRC-36 installed

SSR-36 with SSRC-36

in storage below

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Specications subject to change without notice. For current specications please visit our website.

Printed in USA

3.32

Approval/Notes:

Rev.12-07-16

Page 2

Speed Rails and Locking Covers

Dimensional Information

Single Speed Rails are available in one inch increments from 12" to 84" in length. The model number designation is SSR- X , where X = the length of the unit in inches. Speed rails over 48" also have a center support.

PLAN VIEW

8 1/4"

FRONT ELEVATION

PVC PLASTIC COVER OVER STAINLESS STEEL "C" CHANNEL

8 1/4"

SIDE ELEVATION

Single Speed Rail Locking covers are available in one inch increments from 12" to 48". The model number designation is SSRC- X , where X = the length of the unit in inches. Use multiple covers for speed rails longer than 48". (NOTE: 24" and 29" deep Liquor Displays require multiples of four and five locking covers, respectively)

3 3/8"

LOCKING COVER

6 13/16"

13 7/8"

J-HOOK

SPEED RAIL

LOCKING SPEED RAIL COVER HANGER AVAILABLE WITH SINGLE SPEED RAIL ONLY

SSR-__ SSRC-__

Double Speed Rails are available in one inch increments from 12" to 84" in length. The model number designation is DSR- X , where X = the length of the unit in inches. Double speed rails over 48" also have a center support.

18"

10"