Glastender DR-IC90 User Manual
1/2" TAIL PIECE
X
8"
4"
1-1/2"
3/4"
DR-36L
BAR TOP
DRINK RAIL
8"
1"
8"
1"
8"
8"
8"
DR-IC45 DR-OC45
8"
DR-IC90 DR-OC90
Corner Filler Model Numbers and Dimensions
Project:
Item #: Qty:
AIA#
SIS#
Model #:
Drink Rails
DR-12L, DR-12R, DR-18L, DR-18R, DR-24L, DR-24R, DR-30L,
DR-30R, DR-36L, DR-36R, DR-42L, DR-42R, DR-48L, DR-48R
Standard Features
• All stainless steel construction
18 gauge stainless steel pan with removable perforated insert
•
(corner units are flat fillers)
• 30" and 36" models have one gusset and 42" and 48" models
have two gussets for added strength
• Drain consists of 1/2" tailpiece that exits from the back of the
unit
45° and 90° inside and outside corner filler sections available
•
• Installation kit includes: 10' of clear vinyl drain tube, one 4"
Ty-wrap, three #10 x 1/2" stainless steel sheet metal screws,
three cable clamps and one 1/2" x 1/2" x 1/2" plastic tee,
17 #10 x 12 black sheet metal screws
Inside 45° Outside 45° Inside 90° Outside 90°
Dimensional Information
PLAN VIEW
Model Number Key
left to right
dimension
in inches
Installation Detail
DR-__ __
Drain location:
L = Left, R = Right
X = Left to right dimension from 12" to 48", in 6" increments
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
SIDE ELEVATION
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Apply silicone sealant to the rear mounting surface of the drink rail.
Install unit by securing to underside of bar top with wood screws
provided. If installing to material other than wood, use appropriate
screws to secure. Plumb drain once installed.
Approval/Notes:
3.37
Rev. 11-05-07
Loading...