Glastender DR-18L User Manual
A family company manufacturing in the USA
DRINK RAIL
DR-IC45 DR-OC45
DR-IC90 DR-OC90
www.glastender.com
Project:
Item #: Qty:
Model #:
Drink Rails
AIA#
SIS#
DR-36L
DR-12L, DR-12R, DR-18L, DR-18R, DR-24L, DR-24R, DR-30L,
DR-30R, DR-36L, DR-36R, DR-42L, DR-42R, DR-48L, DR-48R
Standard Features
• All stainless steel construction
• 18 gauge stainless steel pan with removable perforated insert
(corner units are flat fillers)
• 30" and 36" models have one gusset and 42" and 48" models
have two gussets for added strength
4004503
Conforms to ANSI/NSF STD 2
Corner Filler Model Numbers and Dimensions
1"
8"
8"
8"
1"
Inside 45° Outside 45° Inside 90° Outside 90°
To view cleaning and care instructions, please visit: http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf
8"
8"
8"
• Drain consists of 1/2" tailpiece that exits from the back of the
unit
• 45° and 90° inside and outside corner filler sections available
• Installation kit includes: 10' of clear vinyl drain tube, one
4" Ty-wrap, three #10 x 1/2 stainless steel sheet metal
screws, three cable clamps and one 1/2" x 1/2" x 1/2"
plastic tee, 17 #10 x 1/2 black sheet metal screws
Model Number Key
DR-__ __
left to right
dimension
in inches
Drain location:
L = Left, R = Right
Dimensional Information
8"
X = Left to right dimension from 12" to 48", in 6" increments
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
X
4"
1/2" TAIL PIECE
PLAN VIEW
3/4"
SIDE ELEVATION
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
1-1/2"
Installation Detail
BAR TOP
Apply silicone sealant to the rear mounting surface of the drink rail.
Install unit by securing to underside of bar top with wood screws
provided. If installing to material other than wood, use appropriate
screws to secure. Plumb drain once installed.
Approval/Notes:
3.37
Rev. 11-09-15
Loading...