Glastender DI-MW30 User Manual

A family company manufacturing in the USA

4-7/8

5-1/2"

X

www.glastender.com

Project:

Item #: Qty:

Model #:

Drop-In

Mixology Wells

DI-MW24, DI-MW30, DI-MW36

AIA#

SIS#

4004503

Conforms to ANSI/NSF STD 2

DI-MW30

Top View

DI-MW30

Front View

DI-MW30

Shown dressed

(1/9th pans and bottles not included)

Standard Features

• Stainless steel top and interior liner

• PVC plastic breaker strip around well liner: creates 5/16ʺ

raised edge around liner and acts as thermal barrier to prevent
heat transfer

• CFC-free foamed-in-place insulation

• Galvanized steel exterior wrap

• 4ʺ deep well liner is 3-3/4ʺ front-to-back

• Designed to hold up to 3-1/2ʺ wide bottles or 1/9th pans

• Installation kit includes: 10ʹ of clear vinyl drain tube, five - 4ʺ

Ty-wraps, one - 1/2ʺ PVC elbow, one - 1/2″ nylon elbow, and
one drainline splicer

• Install by making cut-out in work surface (see Cut-Out

Dimensions under Specifications). Make initial drain
connection, especially if access to drain is limited once the
unit is in place. Apply silicone sealant to underside of flange.
Set in place and finish plumbing the drain line.

Dimensional Information

X = Left to right dimension is 24ʺ, 30", or 36"

Specications

Drains

• 1/2ʺ welded tailpiece

Liner

• 4ʺ deep and 3-3/4″ front-to-back

Cut-out Dimensions

• Model DI-MW24 - 6-1/2ʺ by 22-1/2ʺ

• Model DI-MW30 - 6-1/2ʺ by 28-1/2ʺ

• Model DI-MW36 - 6-1/2ʺ by 34-1/2ʺ

Materials

• 22 gauge galvanized steel parts include: exterior

wrap and bottom

• 20 gauge stainless steel parts include: interior liner

• 18 gauge stainless steel parts include: top

To view cleaning and care instructions, please visit:
http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

Specications subject to change without notice. For current specications please visit our website.

Printed in USA

989.752.4275 • 800.748.0423 • Fax [phone]
www.glastender.com

3.51

8"

PLAN VIEW

"

FRONT VIEW

SIDE ELEVATION

Approval/Notes:

4-1/16"

3/4"

Rev. 02-08-16