Glastender DI-IS24 User Manual
A family company manufacturing in the USA
www.glastender.com
Project:
Item #: Qty:
Model #:
Drop-In
AIA#
SIS#
DI-IS24
DI-IW24
All faucets are NSF/ANSI 61, Annex G
low lead compliant
Units
DI-IS24, DI-IS24-LF, DI-IW24, DI-IW24-LF
Standard Features
• Manufactured with total welded construction to meet all NSF
standards
• Stainless steel top, interior liner, and sink bowl
• Unique hemmed edge for added strength and visual appeal
• 9-1/4″ by 11-1/2″ by 6″ deep sink bowl
• Includes four 1/4-20 x 1-1/2″ studs for mounting to countertop
• Includes 1-1/2″ IPS drain fitting
• PVC plastic breaker strip around ice bin liner: creates 5/16″
raised edge around liner, acts as thermal barrier to prevent heat
transfer, and makes the cover slide easier
• Sliding stainless steel cover
• CFC Free foamed-in-place insulation
• Galvanized steel exterior wrap
• 10-1/2″ deep liner
• Heavy-duty faucet is standard
(available less faucet by adding the
suffix ‘-LF’ to the model number)
4004503
Conforms to NSF/ANSI STD 2
Certied to CSA STD B45.4
®
Specications
Drains
• Sink: 1-1/2″ I.P.S. Threaded drain will fit Dearborn part
#8033 slipnut and part #W-573P washer.
• Ice Bin: 1-1/2″ tail piece
Faucet (not included with -LF models)
• DI-IS24: Deck mount on 4″ centers, accepts 3/8″ sink leads,
hot and cold water connections required
• DI-IW24: Deck mount water filler, accepts 3/8″ sink lead,
cold water connection required
Sink Bowl Dimensions
• 9-1/4″ by 11-1/2″ by 6″ deep
Cover
• Two piece sliding cover, stainless steel, included with all
models
Ice Bin Liner Depth
• 10-1/2″
Ice Capacity
• 33 lbs
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
6.03
Cut-out Dimensions
• 17-1/2″ by 22-1/2″
Materials
• 20 gauge stainless steel parts include: All components
unless otherwise noted
• 16 gauge galvanized steel part include: faucet support
bracket
• 22 gauge galvanized steel parts include: exterior wrap and
bottom
To view cleaning and care instructions, please visit:
http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf
Approval/Notes:
Rev. 11-16-16
Drop-In Units
DI-IS24
DI-IW24
Dimensional Information
24"
SLIDING COVER
8 3/4"
20 3/4"
19"
PLAN VIEW SIDE VIEW FRONT VIEW
24"
SLIDING COVER
9 3/8"
21 3/8"
19"
12"
12"
PLAN VIEW SIDE VIEW FRONT VIEW
CUTOUT INFORMATION
DOTTED LINE
REPRESENTS DROP-IN
WORK SURFACE
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
22-1/2"
CUT
OUT
HOLES FOR MOUNTING
STUDS SHOULD BE
DRILLED IN THE FIELD
17-1/2"
Printed in USA
Loading...