Glastender DI-HS12-LF, DI-HS14, DI-HS14-LF General Manual
Project:
Item #: Qty:
Model #:
Drop-In
Hand Sinks
AIA#
SIS#
DI-HS14
Specications
DI-HS12
DI-HS12, DI-HS12-LF, DI-HS14, DI-HS14-LF
Standard Features
• Manufactured with total welded construction to meet all NSF
standards
• All stainless steel construction
• Unique hemmed edge for added strength and visual appeal
• 9-1/4″ by 11-1/2″ by 6″ deep sink bowl
• Includes four 1/4-20 x 1-1/2″ studs for mounting to countertop
• Includes 1-1/2″ IPS drain fitting
• Heavy-duty faucet is standard (available less faucet by adding
the suffix ‘-LF’ to the model number)
®
Drains
• 1-1/2″ I.P.S. Threaded drain will fit Dearborn part
#8033 slipnut and part #W-573P washer.
Faucet
• Deck mount on 4″ centers, accepts 3/8″ sink leads,
hot and cold water connections required
Sink Bowl Dimensions
• 9-1/4″ by 11-1/2″ by 6″ deep
Materials
• 20 gauge stainless steel
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
6.02
Approval/Notes:
Rev.07-15-10
Drop-In Hand Sinks
Dimensional Information
12"
17"
11 1/2"
6 5/16"
9 1/4"
PLAN VIEW SIDE VIEW FRONT VIEW
DI-HS12
14"
15"
9 1/4"
PLAN VIEW SIDE VIEW FRONT VIEW
6 5/16"
11 1/2"
6 5/16"
6 5/16"
DOTTED LINE
REPRESENTS SINK
WORK SURFACE
12 1/2"
1 1/2"
DI-HS14
CUT-OUT DIMENSIONS:
10-1/2" x 12-1/2" FOR SINK BOWL
TWO 1-1/8" DIAMETER HOLES FOR SINK
CUT-OUT
10 1/2"
DI-HS12 DI-HS14
LEADS AND FOUR 5/16" DIAMETER HOLES FOR
MOUNTING STUDS MUST BE DRILLED AT
TIME OF SINK INSTALLATION.
1 3/8"
CUT-OUT
12 1/2"
INSTALLATION INFORMATION
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
DOTTED LINE
REPRESENTS SINK
WORK SURFACE
10 1/2"
Printed in USA
Loading...