Glastender DI-DP12X30, DI-DP12X36, DI-DP12X42, DI-DP12X48, DI-DP18X24 General Manual

Project:

Item #: Qty:

Model #:

Drop-In Drain Pans

DI-DP12X24, DI-DP12X30, DI-DP12X36,

DI-DP12X42, DI-DP12X48,

DI-DP18X24, DI-DP18X30, DI-DP18X36,

DI-DP18X42, DI-DP18X48

AIA#

SIS#

DI-DP12X24

Model Number Key

DI-DP__X__

Front to back
dimension in
inches

Dimensional Information

X = Left to right dimension from 24" to 48", in 6" increments
Y = Front to back dimension of 12" or 18"

X

Left to right
dimension in
inches

Standard Features

• All stainless steel construction

• 18 gauge stainless steel pan with removable perforated inserts

• Available in standard widths of 12" or 18" and lengths from
24" to 48". Custom sizes also available

• Drain consists of 1/2" tailpiece that exits from the bottom of
the unit

• Drain pan flange includes self-rimming edge for tight fit to
work surface

• Installation kit includes: 10' of clear vinyl drain tube, one 4"
Ty-wrap, three #10 x 1/2" stainless steel sheet metal screws,
three #10 x 1/2" black sheet metal screws, three cable clamps,
two 1/2" x 1/2" plastic elbows

• Install by making cut-out in work surface (see details below),
apply silicone sealant to underside of drain pan flange, set in
place and plumb drain line.

Cut-Out Details

Make cut-out 1-3/4" smaller than the outer flange dimensions.
This will leave approximately 1/8" gap between edge of cut-out
and the drain pan sides for a snug fit.

Overall Length
Minus 1-3/4"

Y

DRAIN LOCATION

2-1/2"

2-1/2"

PLAN VIEW

3/4"

SIDE ELEVATION (not to scale)

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax [phone]
www.glastender.com

Specications subject to change without notice. For current specications please visit our website.

Printed in USA

3.38

Overall Depth
Minus 1-3/4"

CUT-OUT

EXAMPLE: A DI-DP12X24 which measures 12" x 24"
would require a cut-out size of 10-1/4" x 22-1/4"

Approval/Notes:

Rev. 06-02-10