Glastender DI-DP12X24 User Manual
A family company manufacturing in the USA
Overall Depth
Minus 1-3/4"
Overall Length
X
2-1/2"
2-1/2"
www.glastender.com
DI-DP12X24
Model Number Key
DI-DP__X__
Front to back
dimension in
inches
Left to right
dimension in
inches
4004503
Conforms to ANSI/NSF STD 2
Project:
Item #: Qty:
AIA#
SIS#
Model #:
Drop-In Drain Pans
DI-DP12X24, DI-DP12X30, DI-DP12X36,
DI-DP12X42, DI-DP12X48,
DI-DP18X24, DI-DP18X30, DI-DP18X36,
DI-DP18X42, DI-DP18X48
Standard Features
• All stainless steel construction
• 18 gauge stainless steel pan with removable perforated inserts
• Available in standard widths of 12" or 18" and lengths from
24" to 48". Custom sizes also available
• Drain consists of 1/2" tailpiece that exits from the bottom of
the unit
• Drain pan flange includes self-rimming edge for tight fit to
work surface
• Installation kit includes: 10' of clear vinyl drain tube, one 4"
Ty-wrap, three #10 x 1/2" stainless steel sheet metal screws,
three #10 x 1/2" black sheet metal screws, three cable clamps,
two 1/2" x 1/2" plastic elbows
• Install by making cut-out in work surface (see details below),
apply silicone sealant to underside of drain pan flange, set in
place and plumb drain line.
To view cleaning and care instructions, please visit: http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf
Dimensional Information
X = Left to right dimension from 24" to 48", in 6" increments
Y = Front to back dimension of 12" or 18"
Cut-Out Details
Make cut-out 1-3/4" smaller than the outer flange dimensions.
This will leave approximately 1/8" gap between edge of cut-out
and the drain pan sides for a snug fit.
Minus 1-3/4"
Y
DRAIN LOCATION
PLAN VIEW
3/4"
EXAMPLE: A DI-DP12X24 which measures 12" x 24"
would require a cut-out size of 10-1/4" x 22-1/4"
SIDE ELEVATION (not to scale)
CUT-OUT
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
3.38
Approval/Notes:
Rev. 11-09-15
Loading...