Page 1
DI-IW24
DI-DIW42
DI-IS24
Project:
Item #: Qty:
AIA#
SIS#
Model #:
Drop-In
Units
DI-IS24, DI-IW24, DI-DIS42, DI-DIW42
Standard Features
• Manufactured with total welded construction to meet all NSF
standards
• Stainless steel top, interior liner, and sink bowl
• Unique hemmed edge for added strength and visual appeal
• 9-1/4″ by 11-1/2″ by 6″ deep sink bowl
• Includes four 1/4-20 x 1-1/2″ studs for mounting to countertop
• Includes 1-1/2″ IPS drain fitting
• ABS plastic breaker strip around ice bin liner: creates 5/16″
raised edge around liner, acts as thermal barrier to prevent
heat transfer, and makes the cover slide easier
• Sliding stainless steel cover
• 42
″ models include a seamless welded drainboard with lift-out
perforated insert
• CFC Free foamed-in-place insulation
• Galvanized steel exterior wrap
• 10-1/2″ deep liner
®
Specications
Drains
• Sink and Drainboards: 1-1/2″ I.P.S. Threaded drain will
fit Dearborn part #8033 slipnut and part #W-573P washer.
• Ice Bin: 1-1/2″ tail piece
Faucet
• DI-IS24 and DI-DIS42: Deck mount on 4″ centers,
accepts 3/8″ sink leads, hot and cold water connections
required
• DI-IW24 and DI-DIW42: Deck mount water filler,
accepts 3/8″ sink lead, cold water connection required
Sink Bowl Dimensions
• 9-1/4″ by 11-1/2″ by 6″ deep
Cover
• Two piece sliding cover, stainless steel, included with
all models
Ice Bin Liner Depth
• 10-1/2″
Ice Capacity
• 33 lbs
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
6.03
Cut-out Dimensions
• 24
″ models:
• 42
″ models: 17-1/2″ by 40-1/2″
Materials
• 20 gauge stainless steel parts include: All components
unless otherwise noted
• 16 gauge galvanized steel part include: faucet support
bracket
• 22 gauge galvanized steel parts include: exterior
wrap and bottom
Approval/Notes:
17-1/2″ by 22-1/2″
Rev.08-25-09
Page 2
Drop-In Units
Dimensional Information
PLAN VIEW
PLAN VIEW
24"
24"
19"
19"
20 3/4"
SIDE VIEW
21 3/8"
SIDE VIEW
8 3/4"
9 3/8"
SLIDING COVER
SLIDING COVER
DI-IS24
12"
FRONT VIEW
DI-IW24
12"
FRONT VIEW
PLAN VIEW
FRONT VIEW
42"
SLIDING COVER
42"
19"
SLIDING COVER
12"
SIDE VIEW
CUT-OUT INFORMATION
HOLES FOR
MOUNTING STUDS
SHOULD BE
DRILLED
IN THE FIELD
DOTTED LINE
REPRESENTS
DROP-IN
WORK SURFACE
9 3/8"
21 3/8"
22-1/2" (24" models)
40-1/2" (42" models)
CUT
OUT
DI-DIW42
17-1/2"
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
Loading...