Glastender DBSA-12 User Manual

A family company manufacturing in the USA

www.glastender.com

Project:

Item #: Qty:

Model #:

Drainboard

Blender Stations

DBSA-12, DBSA-14, DBSA-18, DBSA-24, DBSA-12-RF, DBSA-14-RF, DBSA-18-RF,

DBSB-12, DBSB-14, DBSB-18,

AIA#

SIS#

Power cord access hole in front skirt, behind blender

NOTE: “-RF” models include rinser

DBSB-18

(Blender not included)

4004503

Conforms to ANSI/NSF STD 2

faucet for rinsing blender cups..

03012383

Rinser Faucet

Assembly

Conforms to NSF/ANSI STD 372

4004503

Standard Features

• All stainless steel construction

• One-piece,seamlesstopandbacksplashfeaturing1/4″radius

corners for easy cleaning

• CFC free foamed-in-place blender shelf for sound deadening

• Adjustable stainless steel bullet feet

• Drainboard work surface consists of drain pan with separate removable perforated insert

• Blender shelf features radius interior corners for easy cleaning

• Power cord access hole with grommet located on front skirt, behind the blender

• Junction box for duplex GFI outlet mounted underneath blender shelf (outlet not included)

• “-RF” models include a convenient rinser faucet for rinsing blender cups.

NOTE:

Blender stations cannot have a speed rail mounted to them. Since speed rails are so common on underbar, blender stations come in 24″ and 29″ depths to align with underbar that has a speed rail.

Specications

Rinser Faucet (models with “-RF” suffix)

• Accepts 3/8″coldwaterlead

• 30 psi water pressure regulator included

Drain

• 1-1/2″ I.P.S. Threaded drain will fit Dearborn part #8033 slipnut and part #W-573P washer.

Legs

• 1-5/8″ diameter, 16 gauge stainless steel

• Stainless steel bullet feet

Materials

• 20 gauge stainless steel

Rinser Faucet Installation Notes

• Important: Unit must be installed in conformance with applicable federal, state, and local plumbing codes, including adequate backflow when required.

DBSA-12-RF

• Install in-line water regulator (included).

• A separate shut-off valve is recommended (not included).

To view underbar installation instructions, please visit: http://www.glastender.com/PDF/F-750-165_Underbar_Installation_Instructions.pdf

To view cleaning and care instructions, please visit: http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf

Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Specications subject to change without notice. For current specications please visit our website.

Printed in USA Rev. 12-08-15

3.06

Approval/Notes:

DRAIN

21"

DRAIN

Drainboard Blender Stations

Dimensional Information

24″ Deep Models

15"

24"

REMOVABLE PERFORATED INSERT

PLAN VIEW

19"

16"

WITH RINSER FAUCET

15"

30"

REMOVABLE PERFORATED INSERT

RINSER FAUCET Specify “-RF” suffix in the model number

ACCESS HOLE FOR BLENDER POWER CORD

37"

Model #

DBSA-12 DBSA-14 DBSA-18 DBSA-24 DBSA-12-RF DBSA-14-RF DBSA-18-RF

12″ 14″ 18″ 24″ 12″ 14″ 18″

SIDE VIEW

29″ Deep Models

19"

21"

29"

REMOVABLE PERFORATED INSERT

10"

PLAN VIEW

19"

16"

FRONT VIEW

30"

Model #

DBSB-12 DBSB-14 DBSB-18

ACCESS HOLE FOR BLENDER POWER CORDS

37"

12″ 14″ 18″

SIDE VIEW FRONT VIEW

5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Printed in USA