Glastender DBGR-18, DBGR-24-RS General Manual
DBGR-18
Project:
Item #: Qty:
Model #:
AIA#
SIS#
Drainboard
Glassracks
DBGR-18, DBGR-24, DBGR-24-RS
Standard Features
• All stainless steel construction
• Adjustable stainless steel bullet feet
• One piece, seamless top and backsplash featuring 1/4″ radius
corners for easy cleaning
• DBGR-18 and DBGR-24 have a bottom shelf and one adjustable intermediate shelf
• DBGR-24-RS has roll-out bottom shelf and one roll-out
intermediate shelf (intermediate shelf is not adjustable)
• Solid shelves are also useable for non-glassrack storage
• Exclusive design drainboard top with drain pan and separate
perforated insert for better air circulation
• Intermediate shelf and floor are still removable after unit is
plumbed and include radius corners for easy cleaning
• Smooth interior walls for easy cleaning and a finished
appearance
• All storage is on a level plane
DBGR-24-RS
(Glassrack not included)
Specications
Drain
• 1/2″ welded tailpiece. Clear vinyl drain line is connected
to the tailpiece at the factory. A 1/2″ by 1/2″ barbed plastic
elbow is provided to make the connection at the bottom of
the unit.
Legs
• 1-5/8″ diameter, 16 gauge stainless steel
• Stainless steel bullet feet
Materials
• 20 gauge stainless steel parts include: all
components unless otherwise noted
• 18 gauge stainless steel parts include: leg pads
Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA Rev. 11-06-08
Product Information
Drainboard Glassracks have a stationary or roll-out bottom
shelf, adjustable or roll-out intermediate shelf, and drainboard
work surface. All models are 24″ deep. The 24″ wide models
hold 20″ by 20″ racks and the 18″ wide model holds the 16″
round racks used with the Glastender GT-18 glasswashers.
Since drainboard glassrack shelves are solid, they can be used
for non-glassrack storage also.
If a 19″ deep drainboard glassrack is required, please see the
19″ deep drainboard cabinets less doors on page 3.16. Also,
see page 1.11 for special glass rack holders for GT-18 glasswashers.
Approval/Notes:
3.15
Drainboard Glassracks
Dimensional Information
24"
PLAN VIEWS
DBGR-18
AND
DBGR-24
18"
DBGR-18
BACKSPLASH
FRONT RAIL
18" or 24"
DRAIN
7"
24"
DBGR-24
24"
ROLL-OUT
SHELF
24"
24"
15 1/4"
DBGR-24-RS
24"
DBGR-24-RS
37"
37"
24"
ADJUSTABLE
SHELF
30"
6"
24"
7"
ROLL-OUT
SHELVES
30"
6"
FRONT ELEVATION
5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
SIDE ELEVATION
Printed in USA
Loading...