Page 1
A family company manufacturing in the USA
www.glastender.com
4004503
Conforms to NSF/ANSI STD 18
NOTE: Faucet handles
not included.
CT-3-SS
CT-3-SS with optional Rinser Faucet Extension
Project:
Item #: Qty:
AIA#
SIS#
Model #:
Column Towers
CT- -
Size:
Specify the number of
faucets from 1 to 3.
Standard Features
• All stainless steel construction (brass is optional)
• Integral surface mount drain pan with lift-out perforated insert
• 1/4″ shanks with 3/16″ restriction lines
• Available in grainline stainless, mirror finish stainless, or
polished brass
• Available with foamed-in-place cold plate assembly for
recirculating system
• Available without drain pan (specify suffix ‘-LD’ on the
model number)
• Available with one, two, or three faucets
• All models include all stainless steel faucets and shanks
• Unique internal support system for solid mounting
• Base plate serves as template for hole cutting
• Available with rinser faucet extension to the left or right
of the drain pan. Specify accessory model number RFSS,
RFMF, or RFPB for stainless steel, mirror finish, or
polished brass respectively.
Finish:
SS = Stainless steel
MF = Mirror finish
PB = Polished brass
Specications
Drains
• Drain pan models - 1/2″ tailpiece
Materials
• 20 gauge stainless steel or brass parts include: head,
column, drain pan, and perforated inserts
• 16 gauge stainless steel parts include: inner column
stiffener brackets
• 16 gauge galvanized steel parts include: base plate
and faucet stiffeners
• 11 gauge stainless steel parts include: inner column
base plate
Shank Sizes
• 1/4″ I.D. with 3/16″ fittings
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
5.03
Rinser Faucet (optional)
• Accepts 3/8″ cold water lead
• 30 psi water pressure regulator included
NOTE: Rinser faucets are not intended for use with towers
mounted to a refrigerator due to risk of water line freeze up.
Rinser Faucet Installation Notes
• Important: Unit must be installed in
conformance with applicable federal,
state, and local plumbing codes, including
adequate backflow when required.
• Install in-line water regulator (included).
• A separate shut-off valve is recommended
(not included).
Approval/Notes:
03012383
Rinser Faucet Assembly
Conforms to NSF/ANSI STD 372
4004503
Rev. 05-31-16
Page 2
DRAIN
DRAIN
4"
Column Towers
Dimensional Information
FRONT ELEVATIONS
ONE FAUCET TOWER
5"
14"
TWO FAUCET TOWER
5" 5"
1-1/4"
14" 14"
12"
NOTE: Faucet handles not included.
THREE FAUCET TOWER
1-1/4"
12"
SIDE ELEVATIONS
10"
ALL COLUMN TOWERS
10"
15-1/4"
1/2"
12"
4"
15-1/4"
PLAN VIEWS
COLUMN TOWERS WITH OPTIONAL RINSER FAUCET EXTENSION
FRONT ELEVATIONS
5" 5" 5"
ONE FAUCET
TOWER
19" 19" 19"
TWO FAUCET
TOWER
1-1/4"
12"
1/2"
12"
W/RINSER FAUCET
NOTE: Faucet handles not included.
THREE FAUCET
TOWER
1-1/4"
12"
PLAN VIEWS
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
Loading...