Glastender CSR-16, CSR-22, CDSR-22 General Manual
CSR-24-SR
Project:
Item #: Qty:
AIA#
SIS#
Model #:
Clip-On Speed Rails
(model numbers on reverse side)
Standard Features
• All stainless steel construction
• Open channel-and-rail design for easy cleaning and better
view of bottles
• ABS sound deadening covers
• Single and double tier models
• Three types for clipping to glasswashers, vertical surfaces,
and other Glastender speed rails
• Retaining rails have a clear lift-off liquor identification cover
Specications
Materials
• 20 gauge stainless steel parts include: liquor steps
and front rails
• 18 gauge stainless steel parts include: one piece
ends, back and clip on glasswasher and cocktail
station models
• 16 gauge stainless steel parts include: clip on speed
rail models
• 14 gauge stainless steel parts include: ends on
speed rail models
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
3.33
Product Information
Clip-on speed rails come in three different styles based on the
particular mounting situation. The CSR- X -SR models, where
X = the length of the unit in inches from 12″ to 42″, are designed
to clip to an existing Glastender single or double speed rail.
The CSR-16 and CSR-22 are 16″ and 22″ clip-on single speed
rails for use with the GT-24 and GT-30 glasswashers, respectively. The CDSR-16 and CDSR-22 are double versions used for
the same purpose.
The CS-35-CS is a 35″ clip-on single speed rail used to clip to the
front panel of a pass thru style cocktail station.
Approval/Notes:
Rev. 11-05-07
CSR-35-CS
CSR- X
X = LENGTH FROM 12" TO 42"
FOR CLIPPING TO THE FRONT PANEL OF A
GLASTENDER PASS THRU COCKTAIL STATION
SPEED RAILS
FOR CLIPPING TO EXISTING GLASTENDER
-SR
22" FOR GT-30
X = 16" FOR GT-24
FOR CLIPPING TO A GLASTENDER GT-24
OR GT-30 GLASSWASHER
CSR-16 or CSR-22
X = 16" FOR GT-24
22" FOR GT-30
CDSR-16 or CDSR-22
OR GT-30 GLASSWASHER
FOR CLIPPING TO A GLASTENDER GT-24
35"
BACK IS KEY HOLED TO
ATTACH TO A FRONT PANEL
OF A COCKTAIL STATION.
PLAN VIEW
FRONT ELEVATION
SIDE ELEVATION
6"
4"
13"
5"
4"
4"
2"
10"
6"
X
PLAN VIEW
FRONT ELEVATION
SIDE ELEVATION
PLAN VIEW
FRONT ELEVATION
SIDE ELEVATION
ABS PLASTIC COVER
OVER STAINLESS STEEL
"C" CHANNEL
6"
4"
8 1/4"
5"
5"
X
8 1/4"
PLAN VIEW
FRONT ELEVATION
SIDE ELEVATION
ABS PLASTIC COVER
OVER STAINLESS STEEL
"C" CHANNEL
6"
4"
14"
5"
X
14"
Clip-On Speed Rails
Dimensional Information
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
Loading...