Glastender C-MFS-12 User Manual

BY GLASTENDER

www.choicebyglastender.com

Project:

®

Item #: Qty:

Model #:

AIA#

SIS#

C-MTS-14

C-MFT-20

4004503

Conforms to ANSI/NSF STD 2

Certied to CSA/CAN STD B45.4

Backsplash faucets are NSF/ANSI 61,

Annex G low lead compliant

Standard Features

• Manufactured with total welded construction to meet NSF®
standards.

• All stainless steel construction.

• One-piece seamless top and backsplash featuring 1/4″ radius
corners for easy cleaning.

• Adjustable thermoplastic bullet feet (does not include
C-MFT-8).

• C-MRS-12 model - Includes backsplash faucet, push-down

rinser faucet to rinse shaker cans, and a lift-out perforated
plastic sink strainer.

• C-MTS-14 model - Includes backsplash faucet, push-down
rinser faucet to rinse shaker cans, a lift-out perforated plastic
sink strainer, and a 6″ diameter seamless welded draining

dipper well and faucet for mixology tools.

• C-MFT-8 model - includes push-down rinser faucet to rinse
shaker cans, a 6″ diameter seamless welded draining dipper
well and faucet for mixology tools, and a 7-1/2″ x 7-1/2″ cut­ting board that is securely mounted but easily removable for
cleaning. NOTE: No legs. Must mount to adjacent underbar.

• C-MFS-12 model - Includes backsplash faucet, a lift-out
perforated plastic sink strainer, and an 8″ x 11″ cutting board
that is securely mounted but easily removable for cleaning.

• C-MFT-20 model - Includes backsplash faucet, push-down

rinser faucet to rinse shaker cans, a lift-out perforated plastic
sink strainer, a 6″ diameter seamless welded draining dipper

well and faucet for mixology tools, an 8″ x 11″ cutting board
that is securely
an ice scoop well.

mounted but easily removable for cleaning, and

Mixology Units

C-MRS-12, C-MTS-14, C-MFT-8, C-MFS-12, C-MFT-20

C-MFS-12

C-MRS-12

C-MFT-8

NOTE: C-MFT-8 model has no accommodation for legs and
must be mounted to at least one adjacent piece of underbar.

Specications

Drain for sinks and dipper wells

• 1-1/2″ I.P.S. Threaded drain will fit Dearborn part #8033
slipnut and part #W-573P washer.

Backsplash Faucet

• Backsplash mounted on 4″ centers, accepts 3/8″ sink
leads, hot and cold water connections required

Dipper Well Faucet (on C-MFT-8, C-MTS-14, & C-MFT-20

models)

• Accepts 3/8″ cold water lead

Rinser Faucet (on C-MRS-12, C-MTS-14, C-MFT-8, &

C-MFT-20 models)

• Accepts 3/8″ cold water lead

• 30 psi water pressure regulator included

Sink Bowl Dimensions (C-MFT-8 does not include a sink)

• 9-1/4″ by 11-1/2″ by 6″ deep

Legs (C-MFT-8 has no legs, must mount to adjacent

underbar)

• 1-5/8″ diameter, 16 gauge stainless steel

• Thermoplastic bullet feet

Materials

• 20 gauge stainless steel parts include: all components
unless otherwise noted

To view cleaning and care instructions, please visit:
http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax [phone]
www.glastender.com

Specications subject to change without notice. For current specications please visit our website.

Printed in USA

C030

Approval/Notes:

Rev. 09-13-16

BY GLASTENDER

34"

8"

24"

8"

34"

Choice Mixology Units

Dimensional Information

C-MFT-8

24"

14"

7-1/2″ x 7-1/2″ CUTTING BOARD

PLAN VIEW

NOTE: MFT-8 model has no accommodation for legs and
must be mounted to at least one adjacent piece of underbar.

FRONT
ELEVATION

SIDE
ELEVATION

C-MFS-12

Rinser Faucet

Installation Notes

• Important: Unit must be installed
in conformance with applicable
federal, state, and local plumbing
codes, including adequate

backflow when required.

• Install in-line water regulator
(included).

• A separate shut-off valve is
recommended (not included).

12"

8″ x 11 ″ CUTTING BOARD

C-MTS-14

03012383

Rinser Faucet

Assembly

Conforms to NSF/ANSI STD 372

4004503

14"

18"

24"

PLAN VIEW

FRONT
ELEVATION

8"

24"

C-MRS-12

12"

PLAN VIEW

14"

16"

30"

14"

16"

FRONT
ELEVATION

30"

SIDE
ELEVATION

SIDE
ELEVATION

34"

30"

14"

34"

16"

C-MFT-20

PLAN VIEW

20"

8″ x 11 ″ CUTTING BOARDICE SCOOP WELL

PLAN VIEW

FRONT ELEVATION

FRONT ELEVATION

SIDE ELEVATION

SIDE ELEVATION

14"

24"

30"

16"

®

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax [phone] • www.choicebyglastender.com

Printed in USA