www.choicebyglastender.com
Project:
®
Item #: Qty:
AIA#
SIS#
Model #:
Modular Bar Die
C-MD-41, C-MD-38
Standard Features
• 16 gauge galvanized steel structure with stainless steel
bartender side nishing
• GFI outlets built into bar die wall based on customer
preference (wiring not provided)
• LED lights built into bar die wall above underbar equipment
(wiring not provided)
• Built-in chaseways for beer, soda, plumbing, and electrical
lines
C-MD-41 modular bar die
shown with underbar line-up
The total Number of feet required is calculated by
determining the overall outside dimension of the bar
die wall. Please round up to the nearest whole foot.
Benets Product Information
• Stainless steel from oor to bar top on bartender side
• Floor can be sealed to the bar die to prevent moisture from
seeping from the bartender side to the customer side of the
bar
• Galvanized steel structure will not rot
• Built-in chaseways hide beer, soda, plumbing, and
electrical lines for a cleaner, more attractive bar
• Arrives pre-assembled from factory in sections up to 10
feet for easy installation - lowers installation costs. Just
bolt the sections together, level, and attach to oor.
• Pre-engineered to exact dimensions to ensure a precise t
• Can be used in conjunction with removable front millwork
nishing panels to provide easy access to soda, beer,
plumbing, and electrical lines for future modication,
maintenance, or repair
• Millwork bar top and front panels can be pre-fabricated
and easily attached
• Eliminates all underbar legs for easy cleaning
With the Choice Modular Bar Die, underbar equipment is
mounted to and supported on the bar die. All the underbar
equipment is pre-assembled and mounted to the bar die at the
factory, then broken down into shippable sections. Installation
of the bar die is very simple - easier than a conventional style
underbar with a millwork bar die. The result is a beautiful,
innovative underbar line up that is sealed to the oor, stainless
from oor to bar top, eliminates all underbar leg sets, and hides
the soda, beer, electrical, and plumbing lines.
Model number C-MD-41 Choice modular bar die has an overall
height of 41″, which provides the appropriate overall height for
most bar applications. However, some interior designs require an
extra thick bar top, so Choice modular bar die is also available
with an overall height of 38″. See model C-MD-38.
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
To view cleaning and care instructions, please visit:
http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf
Approval/Notes:
C029
Rev. 05-26-16
Choice Modular Bar Die
Dimensional Information
MODULAR BAR DIE
C-MD-41
TYPICAL UNDERBAR
30"
16"
MODULAR BAR DIE
FRONT
FINISHING
BY OTHERS
41"
PEDESTAL
BASE
BAR TOP BY OTHERS
C-MD-38
TYPICAL UNDERBAR
28-1/2"
14-1/2"
®
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444 • www.choicebyglastender.com
FRONT
FINISHING
BY OTHERS
38"
PEDESTAL
BASE
Printed in USA