Glastender C-IBA-18 User Manual
BY GLASTENDER
www.choicebyglastender.com
C-IBA-36-CP10
NOTE: Ice bins intended to store potable
ice must be ordered with an ice bin cover
to maintain the sanitation listing.
®
4004503
Conforms to ANSI/NSF STD 2
Project:
Item #: Qty:
AIA#
SIS#
Model #:
Ice Bins
See reverse side for model number key
Standard Features
• All stainless steel construction
• PVC plastic breaker strip around ice bin liner acts as a thermal
barrier to prevent heat transfer
• 24″ deep version provides larger ice bin not just a deck
extension on the back of the 19″ deep model
• CFC free foamed-in-place insulation
• Adjustable thermoplastic bullet feet
• Ten circuit available with all 24″ and wider models (add
suffix ‘-CP10’ to model number)
• Backsplash is an open channel to provide access for beverage
lines
Specications Accessories
Drain
• Non-cold plate model: 1-1/2″ tailpiece
• Ten circuit cold plate model ‘-CP10’: 3/4″ MPT
Cold Plate (models with ‘-CP10-ED’ suffix)
• Ten circuit available with all 24″ and wider models
• Connection is 5/16″ O.D. stainless steel tubing with
swaged end
Liner Depth
• 10-1/2″
Legs
• 1-5/8″ diameter, 16 gauge stainless steel
• Thermoplastic bullet feet
Materials
• 20 gauge stainless steel
• PVC plastic breaker strip around ice bin liner
To view cleaning and care instructions, please visit:
http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf
C-SR-X Single speed rail, where X is specied as the
C-DR-X Double speed rail, where X is specied as the
C-IBCA-X or
C-IBCB-X
BW3 or BW4 3 or 4 bottle well for potable ice for 19ʺ (A)
BR3 or BR4 3 or 4 bottle rack for non-potable ice for 19ʺ
CCD Condiment dispenser
IBD-H-A or
IBD-H-B
length in inches.
length in inches.
Two-piece, sliding stainless steel cover for
19ʺ (A) or 24ʺ (B) deep models, respectively,
where X is specied as the length of the ice
bin in inches. Deduct 6ʺ from cover length for
one bottle well and 12ʺ for two bottle wells.
or 24ʺ (B) deep models, respectively. May be
positioned left or right. If two are ordered,
they are positioned one at each side.
(A) or 24ʺ (B) deep models, respectively. One
rack may be ordered for each 6ʺ of ice bin
length. Not for use with sliding cover. Not for
use with 6ʺ ice bins.
Ice bin divider for 19ʺ (A) or 24ʺ (B) deep
models, respectively.
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
C001
Approval/Notes:
Rev. 06-01-16
BY GLASTENDER
OVERALL LENGTH
Choice Ice Bins
Dimensional Information
“A” Depth-19″ Deep Models
15"
PLAN VIEW
19"
SLIDING COVER
ACCESSORY
30"
16"
19"
10-1/2"
Model Number Overall
Length
C-IBA-6* 6" 17 lbs
C-IBA-12 12" 33 lbs
C-IBA-18 18" 50 lbs
C-IBA-24 24" 67 lbs
C-IBA-30 30" 84 lbs
C-IBA-36 36" 100 lbs
4"
34"
C-IBA-42 42" 117 lbs
C-IBA-48 48" 134 lbs
With 10-Circuit Cold Plate
C-IBA-24-CP10 24” 67 lbs
C-IBA-30-CP10 30” 84 lbs
C-IBA-36-CP10 36” 100 lbs
C-IBA-42-CP10 42” 117 lbs
C-IBA-48-CP10 48” 134 lbs
Ice Capacity
SIDE ELEVATION FRONT ELEVATION
“B” Depth-24″ Deep Models
OVERALL LENGTH
24"
PLAN VIEW
20"
SLIDING COVER
ACCESSORY
30"
16"
24"
10-1/2"
* Note: 6" unit cannot be free standing
Model Number Overall
Ice Capacity
Length
C-IBB-6* 6" 21 lbs
C-IBB-12 12" 42 lbs
C-IBB-18 18" 64 lbs
C-IBB-24 24" 85 lbs
C-IBB-30 30" 106 lbs
C-IBB-36 36" 127 lbs
C-IBB-42 42" 149 lbs
4"
34"
C-IBB-48 48" 170 lbs
With 10-Circuit Cold Plate
C-IBB-24-CP10
C-IBB-30-CP10
C-IBB-36-CP10
C-IBB-42-CP10
C-IBB-48-CP10
* Note: 6" unit cannot be free standing
24” 85 lbs
30” 106 lbs
36” 127 lbs
42” 149 lbs
48” 170 lbs
SIDE ELEVATION FRONT ELEVATION
®
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444 • www.choicebyglastender.com
Printed in USA
Loading...