Page 1
A family company manufacturing in the USA
www.glastender.com
CSR-24-SR
Project:
Item #: Qty:
AIA#
SIS#
Model #:
Clip-On Speed Rails
(model numbers on reverse side)
Standard Features
• All stainless steel construction
• Open channel-and-rail design for easy cleaning and better
view of bottles
• PVC sound deadening covers
• Single and double tier models
• Three types for clipping to glasswashers, vertical surfaces,
and other Glastender speed rails
• Retaining rails have a clear lift-off liquor identification cover
4004503
Conforms to ANSI/NSF STD 2
To view cleaning and care instructions, please visit: http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf
Specications
Materials
• 20 gauge stainless steel parts include: liquor steps
and front rails
• 18 gauge stainless steel parts include: one piece
Product Information
Clip-on speed rails come in three different styles based on the
particular mounting situation. The CSR- X -SR models, where
X = the length of the unit in inches from 12″ to 48″, are designed
to clip to an existing Glastender single or double speed rail.
ends, back and clip on glasswasher and cocktail
station models
• 16 gauge stainless steel parts include: clip on speed
rail models
• 14 gauge stainless steel parts include: ends on
speed rail models
The CSR-16 and CSR-22 are 16″ and 22″ clip-on single speed
rails for use with the GT-24 and GT-30 glasswashers, respectively. The CDSR-16 and CDSR-22 are double versions used for
the same purpose.
The CS-35-CS is a 35″ clip-on single speed rail used to clip to the
front panel of a pass thru style cocktail station.
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
3.33
Approval/Notes:
Rev. 12-07-16
Page 2
Clip-On Speed Rails
Dimensional Information
FOR CLIPPING TO EXISTING GLASTENDER
SPEED RAILS
X
5"
PLAN VIEW
PVC PLASTIC COVER
OVER STAINLESS STEEL
"C" CHANNEL
8 1/4"
FRONT ELEVATION
X = LENGTH FROM 12" TO 48"
6"
SIDE ELEVATION
FOR CLIPPING TO THE FRONT PANEL OF A
GLASTENDER PASS THRU COCKTAIL STATION
35"
PLAN VIEW
BACK IS KEY HOLED TO
ATTACH TO A FRONT PANEL
OF A COCKTAIL STATION.
4"
8 1/4"
5"
FRONT ELEVATION
SIDE ELEVATION
4"
13"
6"
5"
CSR- X
FOR CLIPPING TO A GLASTENDER GT-24
OR GT-30 GLASSWASHER
X
-SR
PLAN VIEW
FRONT ELEVATION
X = 16" FOR GT-24
22" FOR GT-30
SIDE ELEVATION
PVC PLASTIC COVER
OVER STAINLESS STEEL
"C" CHANNEL
4"
14"
6"
5"
CSR-35-CS
FOR CLIPPING TO A GLASTENDER GT-24
OR GT-30 GLASSWASHER
X
PLAN VIEW
6"
FRONT ELEVATION
X = 16" FOR GT-24
22" FOR GT-30
SIDE ELEVATION
4"
4"
14"
2"
10"
CSR-16 or CSR-22
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
CDSR-16 or CDSR-22
Printed in USA
Loading...