www.choicebyglastender.com
C-TSA-60
4004503
Conforms to NSF/ANSI STD 2
Certied to CSA STD B45.4
All faucets are NSF/ANSI 61, Annex G
low lead compliant
Specications
Drain
• 1-1/2″ I.P.S. Threaded drain will fit Dearborn part #8033
slipnut and part #W-573P washer.
Faucet
• “A” - 19ʺ deep: backsplash mounted on 4ʺ centers, 3/8ʺ
copper leads provided, hot and cold water connections
required
• “B” - 24ʺ deep: deck mounted on 4ʺ centers, accepts 3/8ʺ
sink leads, hot and cold water connections required
Sink Bowl Dimensions
• 11ʺ by 14ʺ by 10-1/4ʺ deep
Legs
• 1-5/8″ diameter, 16 gauge stainless steel
• Thermoplastic bullet feet
Materials
• 20 gauge stainless steel parts include: all components
unless otherwise noted
To view cleaning and care instructions, please visit:
http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf
Project:
®
Item #: Qty:
AIA#
SIS#
Model #:
Two, Three, & Four
Compartment Sinks
See reverse side for model numbers
Standard Features
• All stainless steel construction and adjustable thermoplastic
bullet feet
• One-piece seamless top and backsplash featuring 1/4ʺ radius
corners for easy cleaning
• 20 gauge stainless steel fabricated sink bowls
• 11ʺ by 14ʺ by 10-1/4ʺ deep sink bowl with hot and cold water
faucet
• Extra wide sink bowl easily accommodates brush washer
• Perforated stainless steel inserts are available to cover sinks
when not in use
• One over-flow tube per sink bowl included
Product Information
Multiple Sinks come in three different varieties: two, three, and
four compartment. They feature a one-piece stainless steel top
that is seamless all the way through the backsplash. Each variety
is offered with or without built-in drainboards on one or both
sides of the sink compartment. The corrugated drainboards, where
included, are a seamless and integral part of the work surface. The
seamless welded bowls are 20 gauge fabricated stainless steel.
An ‘L’ or ‘R’ sufx in the model number designates the location
of the sink compartment as left or right when there is only one
drainboard.
Accessories
C-SR-X Single speed rail, where X is specied as the
length in inches
C-DR-X Double speed rail, where X is specied as the
length in inches
NOTE: For 84″ sink specify two 42″ speed rails or for 96″
sink specify two 48″ speed rails.
C-LSA-D Left side splash for 19ʺ (A) deep models
C-RSA-D Right side splash for 19ʺ (A) deep models
C-LSB-D Left side splash for 24ʺ (B) deep models
C-RSB-D Right side splash for 24ʺ (B) deep models
TR Towel ring
LWS Large wet waste strainer, plastic
03002552 Sink cover, perforated, for C-DS models
03002553 Sink cover, perforated, for C-TS models
03002554 Sink cover, perforated, for C-FS models
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
C021
Approval/Notes:
Rev. 03-18-16
Choice Two, Three, & Four Compartment Sinks
Dimensional Information
“A” Depth-19″ Deep Models “B” Depth-24″ Deep Models
ABDC ABDC
24"19"
PLAN VIEW PLAN VIEW
Number of sink bowls and location of sinks will vary according to the model, see the table below for
exact specications. Four bowl sink faucets feature a double joint spout. Three bowl sink model shown.
“A” Depth-19″ Deep Models
19″ Deep
Models
C-DSA-24 C-DSB-24 N/A 24″ N/A 24″ 2 Center
C-DSA-36L C-DSB-36L N/A 24″ 12″ 36″ 2 Left
C-DSA-36R C-DSB-36R 12″ 24″ N/A 36″ 2 Right
C-DSA-48 C-DSB-48 12″ 24″ 12″ 48″ 2 Center
C-TSA-36 C-TSB-36 N/A 36″ N/A 36″ 3 Center
C-TSA-48L C-TSB-48L N/A 36″ 12″ 48″ 3 Left
C-TSA-48R C-TSB-48R 12″ 36″ N/A 48″ 3 Right
C-TSA-60 C-TSB-60 12″ 36″ 12″ 60″ 3 Center
C-TSA-72 C-TSB-72 18″ 36″ 18″ 72″ 3 Center
C-TSA-84 C-TSB-84 24″ 36″ 24″ 84″ 3 Center
C-TSA-96 C-TSB-96 30″ 36″ 30″ 96″ 3 Center
C-FSA-48 C-FSB-48 N/A 48″ N/A 48″ 4 Center
C-FSA-72 C-FSB-72 12″ 48″ 12″ 72″ 4 Center
C-FSA-84 C-FSB-84 18″ 48″ 18″ 84″ 4 Center
C-FSA-96 C-FSB-96 24″ 48″ 24″ 96″ 4 Center
24″ Deep
Models
A B C D No. of
Sink
Bowls
Sink
Location
30"
16"
SIDE ELEVATION
30"
19"
4"
34"
24"
4"
34"
16"
“B” Depth-24″ Deep Models
SIDE ELEVATION
®
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444 • www.choicebyglastender.com
Printed in USA