Glastender BT-12-MF User Manual
A family company manufacturing in the USA
www.glastender.com
Project:
Item #: Qty:
Model #:
Tee Towers
AIA#
SIS#
NOTE: Faucet handles
not included.
Conforms to NSF/ANSI STD 18
BT-5-SSR with optional Rinser Faucet Extension
BT-10-MFR
4004503
BT- -
Size:
Specify the number of
faucets from 4, 5, 6, 8, 10, 12
Standard Features
• All stainless steel construction (brass is optional)
• Integral surface mount drain pan with lift-out perforated insert
• 1/4″ shanks with 3/16″ restriction lines
• Available in grainline stainless, mirror finish stainless, or
polished brass
• Available with insulated cold plate assembly for
recirculating system
• Available without drain pan (specify suffix ‘-LD’ on the
model number)
• Available in 4, 5, 6, 8, 10, and 12 faucet sizes
• All models include all stainless steel faucets and shanks
• Foamed-in-place insulated column for extra rigidity
• Unique internal support system for solid mounting
• Base plate serves as template for hole cutting
• Available with rinser faucet extension to the left or right
of the drain pan. Specify accessory model number RFSS,
RFMF, or RFPB for stainless steel, mirror finish, or
polished brass respectively.
Finish:
SS = Stainless steel
MF = Mirror finish
PB = Polished brass
Specications
Drains
• Drain pan models - 1/2″ tailpiece
Materials
• 20 gauge stainless steel or brass parts include: head,
column, drain pan, and perforated inserts
• 16 gauge galvanized steel parts include: subsurface head
stiffener and base plate
• 11 gauge stainless steel parts include: inner column base
and top plate and tower head mounting plate
Shank Sizes
• 1/4″ I.D. with 3/16″ fittings
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
5.04
Rinser Faucet (optional)
• Accepts 3/8″ cold water lead
• 30 psi water pressure regulator included
NOTE: Rinser faucets are not intended for use with towers
mounted to a refrigerator due to risk of water line freeze up.
Rinser Faucet Installation Notes
• Important: Unit must be installed in
conformance with applicable federal,
state, and local plumbing codes, including
adequate backflow when required.
• Install in-line water regulator (included).
• A separate shut-off valve is recommended
(not included).
Approval/Notes:
03012383
Rinser Faucet Assembly
Conforms to NSF/ANSI STD 372
4004503
Rev. 05-31-16
A
B
12"
"
"
"
Tee Towers
Dimensional Information
4-3/4"
5"
9-3/4"
1-1/4"
FRONT ELEVATION
SINGLE COLUMN TEE TOWER
NUMBER OF FAUCETS “A” WIDTH
4 14″
5 17″
6 20″
NOTE: Faucet handles not included.
D
A
4-3/4"
B
C
5"
12"
9-3/4"
1-1/4"
FRONT ELEVATION
PLAN VIEWPLAN VIEW
5"
DOUBLE COLUMN TEE TOWER
NUMBER OF FAUCETS “B” WIDTH “C” WIDTH
8 26″ 12″
10-1/4"
15-1/2"
1/2"
12"
DRAIN
SIDE ELEVATION
10 32″ 15″
12 38″ 18″
NOTE: Faucet handles not included.
F
4-3/4"
5"
5"
5"
9-3/4"
15-1/2"10-1/4"
1-1/4"
FRONT ELEVATION FRONT ELEVATION
E
12"
PLAN VIEW PLAN VIEW
SIDE ELEVATION
12"
SINGLE COLUMN TEE TOWER
WITH RINSER FAUCET EXTENSION
NUMBER OF FAUCETS “D” WIDTH “E” WIDTH
4 14″ 19″
5 17″ 22″
6 20″ 25″
1/2" DRAIN
G
H
DOUBLE COLUMN TEE TOWER
WITH RINSER FAUCET EXTENSION
NUMBER OF FAUCETS “F” WIDTH “G” WIDTH “H” WIDTH
8 26″ 31″ 12″
10 32″ 37″ 15″
12 38″ 43″ 18″
4-3/4
9-3/4
1-1/4
12"
NOTE: Faucet handles not included.
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
NOTE: Faucet handles not included.
Printed in USA
Loading...