Glastender BSA-14 User Manual
A family company manufacturing in the USA
www.glastender.com
Project:
Item #: Qty:
Model #:
Blender Stations
AIA#
SIS#
4004503
Conforms to ANSI/NSF STD 2
Certied to CSA/CAN STD B45.4
BSB-18
(Blender not included)
Power cord access
hole in front skirt,
behind blender
Standard Features
• All stainless steel construction
• One-piece, seamless top and backsplash
• CFC free foamed-in-place blender shelf for sound deadening
• Adjustable stainless steel bullet feet
• 9-1/4″ by 11-1/2″ by 6″ deep sink bowl with hot and cold
BSA-12, BSA-14, BSA-18L, BSA-18R,
BSA-18-RF, BSB-12, BSB-14, BSB-18
water gooseneck faucet
• Lift-out plastic perforated sink strainer
• 1″ recessed work surface on ‘BSB-__’ models
• Blender shelf features radius interior corners for easy cleaning
• Power cord access hole with grommet located on front skirt,
behind the blender
• Junction box for duplex GFI outlet mounted underneath
blender shelf (outlet not included)
• BSA-18-RF model includes a convenient rinser faucet to rinse
out the blender cup.
NOTE: Blender stations cannot have a speed rail mounted to them.
Since speed rails are so common on underbar, blender stations
come in 24″ and 29″ depths to align with underbar that has a
speed rail.
Rinser faucet
03012383
Rinser Faucet
Assembly
Specications
Drain
• 1-1/2″ I.P.S. Threaded drain will fit Dearborn part #8033
slipnut and part #W-573P washer.
Faucet
• Models BSA-14, BSA-18, BSA-18R, BSB-14, and
BSA-18: Deck mounted on 4″ centers, accepts 3/8″ sink
leads, hot and cold water connections required
4004503
BSA-18-RF
Conforms to NSF/ANSI STD 372
All faucets are NSF/ANSI 61, Annex G
low lead compliant
• Models BSA-12 , BSB-12, and BSA-18-RF: Backsplash
mounted on 4″ centers, hot and cold water connections
required
Rinser Faucet (BSA-18-RF model only)
• Accepts 3/8″ cold water lead
• 30 psi water pressure regulator included
Sink Bowl Dimensions
Rinser Faucet Installation Notes
• 9-1/4″ by 11-1/2″ by 6″ deep
Sink Strainer
• Important: Unit must be installed in conformance with
applicable federal, state, and local plumbing codes,
including adequate backflow when required.
• Install in-line water regulator (included).
• A separate shut-off valve is recommended (not included).
• Perforated plastic
Legs
• 1-5/8″ diameter, 16 gauge stainless steel
• Stainless steel bullet feet
Materials
• 20 gauge stainless steel
To view underbar installation instructions, please visit: http://www.glastender.com/PDF/F-750-165_Underbar_Installation_Instructions.pdf
To view cleaning and care instructions, please visit: http://www.glastender.com/PDF/F-423-011_ss_clean_care.pdf
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
3.05
Approval/Notes:
Rev. 12-08-15
18"
Blender Stations
Dimensional Information
24"
PLAN VIEWS
30"
12"
24"
9"
15" 15"
37"
19"
14"
9"
*NOTE: The BSA-18L model has
the faucet mounted Left.
Specify BSA-18R for
faucet mounted Right.
24"
37"
16"
18"
15"
37"
9"
BLENDER STATION
WITH RINSER FAUCET
24"
9"
PLAN VIEW
15"
37"
30"
24" 24"
24"
24"
SIDE ELEVATIONS SIDE ELEVATION
18"
18"
30"
10"
29"
*Note: BSB-12 faucet is mounted to backsplash.
SIDE ELEVATION
29"
PLAN VIEWS
12"
10"
29"
14"
29"
10"
37"
29"
5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
Loading...