Glastender BR4 User Manual

A family company manufacturing in the USA

www.glastender.com

BW3

(Positioned Right)

BW3

(Positioned Left)

BW4

(Positioned Left)

BW4

(Positioned Right)

Project:

Item #: Qty:

AIA#

SIS#

Model #:

Bottle Wells

for Potable Ice

Product Information

Bottle Wells are PVC plastic molded bottle holders that are
placed in a potable ice bin to hold ice chilled mix ingredient
pour and store bottles. The plastic well keeps the bottles out of
direct contact with the ice. There are two sizes of wells: 3-bottle,

model number BW3, for 19″ deep ice bins and 4-bottle, model
number BW4, for 24″ deep ice bins. The 3-bottle version is also

used with the IB-38X24 pass thru ice bin.

A bottle well may be placed on one or both sides of an ice bin
and it is designed with a special ledge on one side to hold a slid­ing ice bin cover. When bottle wells are ordered with an original
ice bin, the correct, smaller sliding ice bin cover is automatically
provided.

For three bottles stored on one side of a 19″ deep ice bin, spec­ify one model number BW3. For three bottles stored on both
sides of a 19″ deep ice bin, specify a quantity of two BW3.

For four bottles stored on one side of a 24″ deep ice bin, specify
one model number BW4. For four bottles stored on both sides of
a 24″ deep ice bin, specify a quantity of two BW4.

BR4

(Bottles not included)

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax [phone]
www.glastender.com

Specications subject to change without notice. For current specications please visit our website.

Printed in USA

BR3

3.03

Bottle Racks

for Non-Potable Ice

Product Information

Bottle Racks are vinyl-coated wire racks that are placed in an
ice bin to hold ice chilled mix ingredient pour and store bottles.
There are two sizes of wire racks: 3-bottle, model number BR3,
for 19″ deep ice bins and 4-bottle, model number BR4, for 24″
deep ice bins.

Bottle Racks are intended for use with smaller ice bins, where
the sole purpose of the ice bin is to provide insulated storage for
pour and store bottles. Since bottle racks allow the ice to touch
the bottles, they are not recommended for bottle storage inside
potable ice bins used to make cocktails (use bottle wells shown

above for potable ice). Bottle racks are most often used with 6″
or 12″ wide ice bins, which hold one or two racks, respectively.

For example an IBA-6 ice bin holds one BR3, while an IBA-12
ice bin holds two BR3.

Approval/Notes:

Rev. 12-07-16