GlassOuse V1.3 User Manual

GlassOuse V1.3

USER MANUAL

W A R N I N G !

Keep GlassOuse V1.3 away from magnets.
GlassOuse V1.3 is foldable as regular glasses. Please fold it carefully.
Use GlassOuse charging cable only with GlassOuse device.
Keep away from wet surfaces and water.
Charge and calibrate GlassOuse before first use.

B L U E T O O T H C O N N E C T I O N

GlassOuse V1.3 supports connection to Bluetooth 4.0 and below.

Activate Bluetooth on your device (for iOS and iPadOS, also activate Accessibility > Touch > Assistive
Touch).

Press and hold the “Connect” button on the GlassOuse. The LED light will blink.
Find and link to “GlassOuse V1.3” using your device’s Bluetooth scan screen.
To use GlassOuse with other devices, press the “Connect” button again, or dismiss GlassOuse
connection from your device or turn off previously connected device’s Bluetooth function.

M O U S E U S E

After you wear GlassOuse like regular glasses, the cursor will move according to your head movements.
To move the cursor around the screen, move your head accordingly. Use your switch for clicking actions
or the “dwell” feature of your device. When your head is in a centered and comfortable position towards
the screen, the cursor should be in the middle.

NOTE: You can bring back the mouse cursor to the centre by pushing it to the edge of your device’s
screen with your head and retrieving it back.

C A L I B R A T I O N

We suggest doing the calibration before the first use or when connected with the new device. If the cursor
moves abnormally (i.e. vibration, sliding etc.) calibration is recommended.

Connect GlassOuse with your device via Bluetooth. Wait until the LED is continuously blue.
Keep the Glassouse in an inverted position on a flat solid surface to start automatic

calibration.

During calibration, you will notice LED blinking red and blue alternatively. Once the LED is
continuously blue again, calibration is finished.

NOTE: Calibration should be performed within 3 minutes of successful connection with the device.

[e-mail]

[e-mail]

www.glassouse.com

[e-mail]

[e-mail]

www.glassouse.com

US ER MAN U AL

M O U S E S E N S I T I V I T Y

Go to “Cursor Speed” options of the device.
Select the desired speed.

1.

2.

You can adjust your GlassOuse V1.3 mouse sensitivity via two ways:

To set your cursor speed on your device (PC, tablet, phone, TV):

To set the cursor speed via GlassOuse:

Connect GlassOuse to a G-switch through mono 3.5mm jack plug. Press your G-switch and “Reset”
buttons simultaneously (use the pin to press the reset button). If you are using a Puff Switch, press
“Reset” button of your GlassOuse while you are puffing towards the switch.
While pressing, release “Reset” button first and then release G-switch button. The LED should blink
red. If you are using a Puff Switch, release “Reset” button first and stop puffing after.

1.

2.

As option to GlassOuse V1.3 compatible parts, G-Switch Series adaptive switches come with a 3.5mm jack
plug connector to combine perfectly with GlassOuse V1.3. Alternatively, you can use it with the “dwell”
feature of your device instead. Offering short circuit low signals, all G-Switch options are specially
designed for GlassOuse V1.3 but if you have any other switch devices using 3.5mm connector, you can
connect those to your GlassOuse too.

G - S W I T C H O P T I O N S

L E D I N D I C A T O R

Charging: Red LED is seen continuously on the device
Charging is complete: No LED light on the device
Bluetooth is searching for a connection: LED bli nks Blue
Bluetooth connection is active: LED is continuously Blue
Low battery: LED bl inks Red

O S C O M P A T I B I L I T Y

Computer (Windows, Linux, MacOS, Chrome OS)
Tablet (Android, iPadOS13, Windows, Chrome OS)
Mobile (Android, iOS13, Windows, Chrome OS)
SmartTV (Android)

B A T T E R Y

GlassOuse V1.3 comes with CEBA .7V 360mAh Li-Po battery. The battery life can go up to 150 hours of use
on single charge. Please charge the battery once every three months at least when you do not use your
GlassOuse.

A N G L E O F U S E

GlassOuse V1.3 can be used in a 180° horizontal or 160° vertical angle. Please do not use it while reclining
fully or looking at the ground.