Glasdon Electra Bin Operator Instructions Manual
ELECTRA® BIN
Operator Instruction Leaet
To Secure a Sack in Position (Sack Retention Model).
To Open.
IMPORTANT NOTE: ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE
Using the triangular-shaped
key provided, turn the key
anti-clockwise to unlock the
door.
1.
5.
Pull the sack retention
system forwards.
Pull the rear sack band
upwards.
Drop the sack down
through the sack bands.
1
The door is tted with a
magnetic strip to help retain
the door when unlocked.
2.
Slide the liner out of the
bin by pulling on the liner
handle.
3.
To Empty and Replace Solid Liner.
4.
Lift the liner inside the bin and
rest it on the internal shelf using
the liner handle.
6.
7.
The magnet will take a small
amount of force to override.
The magnet is designed to
keep the door shut whilst
the liner / refuse sack is
emptied.
ELECTRA® BIN
Operator Instruction Leaet
8.
Press the edges of the bag
over the edge of the sack
bands. Press the rear sack band
downwards to add tension and
secure the sack in place.
Push the sack retention
system back inside the bin.
Close the door and lock the
bin using the triangular key,
turning the key clockwise.
9.
10.
2
To Empty and Replace the Ashtray Liner.
Open the bin
(as shown in
diagrams 1-2) and
remove main bin
liner or pull the
sack retention
forwards. Lift
Ashtray from
brackets and
remove from the
bin.
Empty Ashtray
liner and
replace by
hooking back
onto the
brackets.
To Assemble the Freestanding Base (60L Model)
Place the Free Standing
Base on the ground, with the
pre-xed screws protruding
upwards.
Place the Electra Litter Bin on
the Free Standing Base and
align holes in the base of the
bin with the four screws.
Secure in position using
the M10 washer [ITEM
3] and M10 Nut [ITEM 4]
and tighten using an M10
Spanner.
Ensure the base is secured
in position and place in an
appropriate location.
ITEM 1 - Free Standing Base Kit x1
ITEM 2 - M10 Screw x4
ITEM 3 - M10 Washer x4
ITEM 4 - M10 Nut x4
TOOLS REQUIRED
10mm Spanner / Socket x 1
Loading...