Gladiator GAWBM008LG01, GAWB06MTMG Owner’s Manual

MODULARWORKBENCH

Assembly instructions

MESADETRABAJOMODULAR

Insfruccionesde ensamblaje

ETABUMODULAIRE

Instructionsd'assemblage

6' (182.88cm) Workbench

6' (182,88cm) Mesa de lrabajo

#tab, de 6pi (182,88 cm)

TABLEOF CONTENTSIINDICE[rABLE DESMATIERES

WORKBENCH SAFETY ...................................... 2

ASSEMBLY INSTRUCTIONS ............................2

Too_sand Parts................................................ 2

Workbench Use Requirements .......................2

Unpack the Workbench...................................2

InstallLegs and Back Panel ............................ 2

Complete the Assembly .................................. 3

Workbench Care .............................................. 3

WARRANTY ......................................................... 3

8' (243,88cm) Mesa de trabajo

SEGURIDAD DE LA MESA DE TRABAJO .,.,...4

INSTRUCCIONES DE ENSAMBLAJE ...............4

Piezas y Herramientas......................................4

Requisitos para el uso de la mesade trabajo,4

Desempaque la mesa de trabajo .....................4

Instale ]aspatas y el panel posterior...............4

Complete el ensamblaje ..................................5

Culdado de la mesa de trabajo .......................5

_T_ ........................................................... 5

8' (243.88cm) Workbench

_abli de 8 pi (243,88cm)

SI_CURITI_DE L'_-rABU ................................... 6

INSTRUCTIONS D'ASSEM BLAGE...................6

Outlllageet pi_ces n_cessaires....................... 6

Sp6cificetionsd'utilisation de 1'6tabli.............. 6

D6ballage de I'etabli ........................................ 6

Installation des pieds et du panneauartiste,., 6

Fin de I'assemblage......................................... 7

Entretien de 1'6tabli.......................................... 7

GARANTIE ........................................................... 7

WORKBENCHSAFETY

Your safety and the safety of others are very important.

We have provided many importantsafety messages inthis manual and on yourappliance, Always read and obey all

safety messages,

This symbol alerts you topotential hazards that can killor hurt you and others,

1_ his is the safety alert symbol,

Allsafety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING," These words mean:

You can be killed or seriously injured if you don't
immediately follow instructions.

You can be killed or seriously injured if you don't
follow instructions.

All safety messages willtell you what the potential hazard is,tellyou howto reduce the chance of injury,and tell you
what can happen ifthe instructions are not followed.

ASSEMBLYINSTRUCTIONS

Toolsand Paffs

Check that you have everything necessary for correct assembly. Proper

assembly is your responsibility.

Tools Needed:

m %6in.Socket wrench • Adjustable wrench
I 7A6in.Wrench

Parts Supplied:
6 ft. (182.88 cm) Workbench

i Workbench top
m Workbench legs (2 welded sets)

m Leveling legs (4)
m % in. - 20 x3/4in. Back panel

bolts (4)

m % in. x 1_ in. Lag

screws (11)

m % in. Back panel washers (4)
m Back panel

¼in.-2Ox¾in. BackPanelBolts _'_in.xl_in. LagScrews

8 ft. (243.88 cm) Workbench

• Workbench top

• Workbench legs (2 welded sets)

• Leveling legs (4)
m 1/4in. - 20 x ¾ in. Back panel

bolts (4)

• %"x 1V2in. Lag screws (12)

• 1/4in. Back panel washers (4)

• Back panel

V¢orkbench Use Requirements

I intended for use in a garage.
m Maximum weight limitis 1,000 Ibs (453.5 kg) for the workbench.

Unpack the Workbench

1. Unpack the legs and hardware from the box. Verify contents (see
"parts Supplied'_.

2. Remove the back paneland set it aside.
NOTE: Leave the workbench top on the cardboard during

assembly.

3. Remove the protective corners from the workbench top. The bolt
holes should be visible.

Install Legs and Back Panel

1. Place each set of legs onthe workbench underside and match the

bolt holes.

2. Attach the back panel first usingthe 4 back panel bolts and washers

provided, Do not tighten the boltscompletely at this time,

3. Attach the legs to the workbench top using the 8 lag screws. The bolt

holesinthe legsare ovalto ellow space for minor adjustments asyou

work, Tighten the lag screws using a _s in. socket wrench,

4. Use the remaining lag screws to attach the beck panel to the

workbench top.

5. Using a _6 in. wrench, completely tighten the bolts attaching the legs

to the back panel.

6. Screw inthe levelinglegs. The leveling legs have a flat side designed
for use with an adjustable wrench ifneeded. The legs should be at

least V4in. (0.635 cm) engaged inthe workbench leg.
IMPORTANT= Screw the leveling legs in at least V4in. (0.635 cm)

or a minimum of 5 full turns.

1. Using 2 or more people, stand the workbench upright and place it in
itsfinallocation.

2. Adjust the leveling legsas needed.
NOTE: When adjusting the leveling legs, be sure they are at least

V4in. (0,635 cm) engaged in the workbench leg.

Workbench Care

1. Wash theworkbench withamilddstergentand warm water.Do net

allowwatertoremainon theworkbenchforany lengthoftime.

2, Rinsecompletelyanddrythoroughly.

GLADIATORTMGARAGEWORKSMODULARWORKBENCH

WARRANTY

For one year from the date of purchase, when this product isop_erated and maintained according to the instructionsattached to or furnished with the
product, GladiatorTM GarageWorks will replace or repair the defective product or parts to correct defects in materials orworkmanship.

For the life of the product when the Modular Workbench is used and maintained accordingto the instructions attached to or furnished with the product
G adistorTM GarageWorks will pay for repair or replacement of the defective product or parts to correct defects n mater a s or workmanship.

Gladiator TM GarageWorks will not pay for:

1. Service calls to correct the installation of any GladiatorTM GarageWorks products or to instruct you on how to use or install them.

2. Damage resulting from improper handling or shipping of products, or products damaged by accident, misuse, abuse, fire, flood, improper
installation,acts of God, neglect, corrosion, modification or mishandling.

3. Shipping or freight fees to deliv_" replacement products or to return defective products.

4. Repairs or replacement when your product is used in other than normal, single-family household use, such as a commercial environment or handled
inany way inconsistent with the installationinstructionsincluded withthe product.

5. Cosmetic damage including scratches, dings, dents or cracks that do not affect the structural or functional capability of the product.

6. Replacement parts or product for GladietorTM GarageWorks products operated outside the United States and Canada.

7. In Canada, travel or transportation expenses for customers who reside in remote areas.

8. Any labor costs during the limitedwarranty period.

9. Damage resulting from improper loading beyond the specified maximum weight capacity outlined inthe assembly instructions provided with the

product.

10. Surfaces damaged due to chemical interaction resulting In corrosion of paint or metal.

11. Any damage, splitting, checking, cracking orwarping of the wooden top past thefirst year.

Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so this exctualon or limitation may not apply to
you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Outside the 50 United States and Canada, this warranty does not apply, Contact your authorized Gladiator TM GarageWorks dealer to determine
if another warranty applies.

If you need service, call the GladiatorTM GarageWorks Customer Care Center, 1-866-342-4089 (toll-free) from anywhere in the U.S.A. in Canada, contact
your Whirlpool Canada Inc. designated service company or ca 1-800-807-6777.

GLADIATOR TM GARAGEWORKS SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES

ONE-YEAR LIMITED WARRANTY ON WORKBENCH TOP

LIFETIME LIMITED WARRANTY ON WORKBENCH METAL SECTIONS

2/03

Keep this book and your sales slip together for future reference. You
must provide proof of purchase or installation date for In-warranty

service.
Write down the following information about your Modular Workbench to

better help you obtain assistance or se_ice ifyou ever need it. You will
need to know your complete model number and serial number. Youcan

findthis information on the model and serial label located on the back of
the product.

Dealer name
Address
Phone number

Model number.
Serial number

Purchase date

3