Gladiator GAWA45SFTG, GAWA45SFZW, GAGL30WSJG Installation Instructions

GEARLOFT™ SHELF

Assembly Instructions

ESTANTE GEARLOFT™

Instrucciones de ensamblaje

ÉTAGÈRE GEARLOFT™

Instructions d'assemblage

ES TIEMPO DE VOLVER A PENSAR EN EL GARAGE.™

W10159547A

IT'S TIME TO RETHINK THE GARAGE.

LE GARAGE REPENSÉ.™

®

INSTALLATION INSTRUCTIONS

GearLoft™ Shelf Use Requirements

■ Intended to be installed on Gladiator

panels or GearTrack

■ Maximum weight limit is 100 lbs (45.5 kg).

®

channels.

®

Garageworks GearWall®

Unpack the GearLoft™ Shelf Parts

Remove the shelf parts and fasteners, and dispose of/recycle all
packaging materials.

Assemble GearLoft™ Shelf

F1 F2 F11

F1

⁵⁄₁₆

" Allen-head bolt (4)

⁵⁄₁₆

" Flange nut (4)

F2

Gather the required tools before starting assembly.

Tools Needed:

■ ¹⁄₂" Wrench

Tools Supplied:

■ Allen wrench

F11

¹

Wing nut (4)

Mounting Braces Above Shelf

1. With the braces pointing upward, align the braces with the center

and back holes on each side of the shelf.

2. Using Allen-head bolts (F1) and flange nuts (F2), attach a brace

to each side of the shelf. Fully tighten the bolts.

A

A. Brace attached to shelf

Mounting Braces Below Shelf

1. With the braces pointing downward, align the braces with the

center and back holes on each side of the shelf.

2. Using Allen-head bolts (F1) and flange nuts (F2), attach a brace

to each side of the shelf. Fully tighten the bolts.

IMPORTANT: Determine whether you will be mounting the shelf to
the wall with the braces above or below the shelf.

A

A. Brace attached to shelf