Gladiator GATR27V5WG User Manual [en, es, fr]

CLASSIC 27" - 5 DRAWER ROLL-AWAY
Assembly Instructions
CAJA DE HERRAMIENTAS CLÁSICA DE 27" CON RUEDECILLAS Y 5 CAJONES
Instrucciones de ensamblaje
ARMOIRE CLASSIQUE DE 27" SUR ROULETTES AVEC 5 TIROIRS
TABLE OF CONTENTS/ÍNDICE/TABLE DES MATIÈRES
CABINET/LOCKER SAFETY .......................2
ASSEMBLY INSTRUCTIONS.......................2
WARRANTY ..................................................4
SEGURIDAD DEL ARMARIO ..................... 5
INSTRUCCIONES DE ENSAMBLAJE ........5
GARANTÍA ....................................................7
SÉCURITÉ DE L’ARMOIRE......................... 8
INSTRUCTIONS D’ASSEMBLAGE ............. 8
GARANTIE .................................................. 11
GATR27V5WG
GATC26V9WG
GATC26V3WG
GATR27V5WG
IT'S TIME TO RETHINK THE GARAGE.
ES TIEMPO DE VOLVER A PENSAR EN EL GARAGE.™
LE GARAGE REPENSÉ.™
®
W10272179A
CABINET/LOCKER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
follow instructions.
can be killed or seriously injured if you don't
You instructions.
follow
ASSEMBLY INSTRUCTIONS
Tools and Parts
Gather the required tools and parts before starting assembly. Tools Needed:
10 mm Wrench 14 mm Wrench
Parts Supplied:
Rigid casters (2)
Swivel brake casters (2)
14 mm bolts (16)
Spacers (16)
Keys (2)
Push handle
10 mm hex head bolts (4)
Washers (4)
Drawer liners (5)
Top pad (1)
Cabinet Use Requirements
WARNING
Excessive Weight Hazard
Use two or more people to move, assemble or install cabinet.
Failure to do so can result in back or other injury.
WARNING
Tip Over Hazard A child or adult can tip the tool chest and be killed. Open only one drawer at a time. Firmly close and lock drawers before moving the tool
chest. Tool chests are designed to fit together. Use tool
chests as listed in your assembly instructions. Failure to do so can result in serious injury or death.
Intended for use in a garage.
Maximum weight limit is 1000 lbs (455 kg) for the cabinet.
Maximum weight limit is 50 lbs (22.7 kg) for each drawer.
Maximum weight limit is 645 lbs (293 kg) for the top of the
cabinet (combined load weight of the 9 drawer and 3 drawer tool chests).
2
The Gladiator
C
D
designed to support a Gladiator Chest and a Gladiator as shown on the cover.
Remove the tools from the drawers before stacking and
unstacking, and use two or more people to lift the tool chests.
While using the tool chests, open only one drawer at a time
to avoid tipping.
Before moving the Roll-Away cabinet or Roll-Away cabinet
stacked with tool chests to a different location, make sure all the drawers are closed and locked. Use the push handle to move the Roll-Away cabinet.
®
Garageworks Classic 5 Drawer Roll-Away is
®
Classic 9 Drawer Chest stacked on top,
®
Classic 3 Drawer Intermediate
Unpack the Cabinet
NOTE: Keep the packing materials to cushion the cabinet during assembly and then dispose of/recycle all packaging materials.
1. Remove the cabinet, parts and fasteners.
2. Verify contents. See “Parts Supplied.”
3. Using four 10 mm hex head bolts and washers, fasten the handle
brackets to the cabinet.
B
A
C
D E
Install the Casters
IMPORTANT:
Both of the swivel casters with brakes must be installed on the
same side of the cabinet.
The swivel casters and the push handle must be installed on the
same side of the cabinet.
1. Using two or more people, place the cabinet on its top so that
the bottom of the cabinet is facing up, as shown.
2. Determine which side of the cabinet you want to install the swivel
casters.
3. Place a spacer over each of the four holes located in a corner of
the bottom of the cabinet.
4. Align the four holes in the caster plate with the spacers and holes
in the corner of the cabinet.
5. Using four 14 mm bolts for each caster, fasten the caster plates
to the bottom of the cabinet.
6. Repeat steps 2 through 4 to install the remaining casters.
7. Completely tighten the bolts. Using two or more people, stand
the cabinet upright.
A
B
A. Push handle B. Handle bracket C. Slot
D. 10 mm hex head bolt
E. Washer
Complete the Installation
1. Unroll the drawer liners and place a liner in each of the drawers.
2. Place the pad on the top of the cabinet.
Use, Remove and Replace the Drawers
NOTES:
The key locks the roll-away cabinet and all of the drawers.
Use the drawer liners to avoid scratching or damaging the
drawer finish.
Removing the Drawer
1. Unload the contents from the drawer.
2. Slide out the drawer as far as it will go.
3. Press the lever down on the right-hand track and lift the lever up
on the left track to release the drawer. Pull the drawer out the rest of the way.
A. 14 mm bolts B. Swivel caster with
brake
C. Caster plate D. Spacer
Install the Push Handle
IMPORTANT: Install the push handle to the cabinet so that the handle is on the same side as the swivel casters.
1. Insert the brackets on each end of the push handle into the slots
on the cabinet side.
2. Align the holes in the cabinet side with the holes in the brackets.
A
A. Lever
Replacing the Drawer
1. Align the drawer guides with the receiving glides.
2. Hold the receiving glides firmly and insert the drawer guide. NOTE: It is normal for the drawer to close tightly the first time
after it has been removed.
3. Push the drawer in completely.
3
GLADIATOR® GARAGEWORKS
PREMIER MODULAR CABINET WARRANTY
LIFETIME LIMITED WARRANTY
For the life of the product, when the Modular GearBox, GearBin or GearDrawer cabinet is used and maintained according to the instructions attached to or furnished with the product, Gladiator® GarageWorks will pay for replacement or repair of the defective product or parts to correct defects in materials or workmanship.
Gladiator® GarageWorks will not pay for:
1. Service calls to correct the installation of any Gladiator
®
GarageWorks products or to instruct you on how to use or install them.
2. Damage resulting from improper handling or shipping of products, or products damaged by accident, misuse, abuse, fire, flood,
improper installation, acts of God, neglect, corrosion, modification or mishandling.
3. Shipping or freight fees to deliver replacement products or to return defective products.
4. Repairs or replacement when your product is used in other than normal, single-family household use, such as a commercial
environment or handled in any way inconsistent with the installation instructions included with the product.
5. Cosmetic damage including scratches, dings, dents or cracks that do not affect the structural or functional capability of the
product.
6. Replacement parts or product for Gladiator
®
GarageWorks products operated outside the United States or Canada.
7. In Canada, travel or transportation expenses for customers who reside in remote areas.
8. Any labor costs during the limited warranty period.
9. Damage resulting from improper loading beyond the specified maximum weight capacity outlined in the assembly instructions
provided with the product, including overloading of hooks, baskets, shelves, cabinets, and other Gladiator
®
GarageWorks
accessories used with the product.
10. Surfaces damaged due to chemical interaction resulting in corrosion of paint or metal.
11. Replacement keys or locking mechanism.
12. Loss of product contents due to theft, fire, flood, accident or acts of God.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR, OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized Gladiator® GarageWorks dealer to determine if another warranty applies.
If you need service, call the Gladiator
®
GarageWorks Customer eXperience Center, 1-866-342-4089 (toll-free), from anywhere in the
U.S.A. In Canada, contact your Whirlpool Canada LP designated service company or call 1-800-807-6777. In the United States, Gladiator
®
GarageWorks means Whirlpool Corporation, Benton Harbor, Michigan 49022. In Canada, Gladiator®
GarageWorks means Whirlpool Canada LP, Mississauga, ON L5N 3A7. 9/07
Keep this book and your sales slip together for future reference. You must provide proof of purchase or installation date for in-warranty service.
Write down the following information about your Modular GearBox, GearBin or GearDrawer cabinet to better help you obtain assistance or service if you ever need it. You will need to know your complete model number and serial number. You can find this information on the model and serial label located on the back of the product.
4
Dealer name____________________________________________________ Address ________________________________________________________ Phone number __________________________________________________ Model number __________________________________________________ Serial number __________________________________________________ Purchase date __________________________________________________
Loading...
+ 8 hidden pages