PREMIER 10 DRAWER 41" TOOL CHEST
Assembly Instructions
CAJA DE HERRAMIENTAS DE CALIDAD SUPERIOR DE 41"
CON 10 CAJONES
Instrucciones de ensamblaje
COFFRE À OUTILS DE HAUTE QUALITÉ DE 41"
AVEC 10 TIROIRS
Instructions d'assemblage
TABLE OF CONTENTS/ÍNDICE/TABLE DES MATIÈRES
CABINET/LOCKER SAFETY .......................2
ASSEMBLY INSTRUCTIONS.......................2
WARRANTY ..................................................4
SEGURIDAD DEL ARMARIO ..................... 6
INSTRUCCIONES DE ENSAMBLAJE ........6
GARANTÍA ....................................................8
SÉCURITÉ DE L’ARMOIRE......................... 9
INSTRUCTIONS D’ASSEMBLAGE ............. 9
GARANTIE .................................................. 11
GATC4110WG
GATC4110WG
GATR4112WG
IT'S TIME TO RETHINK THE GARAGE.
ES TIEMPO DE VOLVER A PENSAR EN EL GARAGE.™
LE GARAGE REPENSÉ.™
®
W10270361A
CABINET/LOCKER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
follow instructions.
can be killed or seriously injured if you don't
You
instructions.
follow
ASSEMBLY INSTRUCTIONS
Parts
Gather the required parts before starting installation.
Parts Supplied:
■ Drawer liners (10)
■ Top tray l i n er (1)
■ Keys (2)
Cabinet Use Requirements
WARNING
Excessive Weight Hazard
Use two or more people to move, assemble or install
cabinet.
Failure to do so can result in back or other injury.
WARNING
Tip Over Hazard
A child or adult can tip the tool chest and be killed.
Open only one drawer at a time.
Firmly close and lock drawers before moving the tool
chest.
Tool chests are designed to fit together. Use tool
chests as listed in your assembly instructions.
Failure to do so can result in serious injury or death.
■ Intended for use in a garage.
■ Maximum weight limit is 50 lbs (22.7 kg) for each of the 22.2"
(56.4 cm) wide drawers.
2
■ Maximum weight limit is 35 lbs (15.9 kg) for each of the 6.6"
A
(16.8 cm) wide drawers.
■ Maximum weight limit is 500 lbs (227.3 kg) for the tool chest.
■ The Gladiator
is designed to be stacked on top of a Gladiator
12 Drawer - 41" Roll-Away, as shown on the cover.
■ Remove the tools from the drawers before stacking and
unstacking, and use two or more people to lift the tool
chests.
■ While using the tool chests, open only one drawer at a time
to avoid tipping.
■ Before moving the Roll-Away cabinet or Roll-Away cabinet
stacked with a tool chest to a different location, make sure all
the drawers are closed and locked. Use the push handle to
move the Roll-Away cabinet.
®
Garageworks Premier 10 Drawer - 41" Tool Chest
®
Premier
Unpack the Cabinet
NOTE: Keep the packing materials to cushion the cabinet during
assembly and then dispose of/recycle all packaging materials.
1. Locate the keys and unlock the door and drawers.
2. Verify contents. See “Parts Supplied.”
Use, Remove and Replace the Drawers
NOTES:
■ Make sure all the drawers are fully closed before closing the lid.
The drawers will not open when the lid is closed.
■ The key locks the lid and all of the drawers.
■ Use the drawer liners to avoid scratching or damaging the
drawers.
Remove and Replace the Shelf
The shelf is supported by the metal loops on the side walls of the
cabinet. You can adjust the height of the shelf to accommodate your
storage needs.
1. Determine where you want to place the shelf.
2. Tilt the shelf so that one end is higher than the other as shown.
3. Insert the shelf into the cabinet so that the higher end is directly
above the desired slots and push the shelf down in place behind
the side slots.
B
A. Push down
B. Lift up
4. Raise the lower end so it is directly above the desired slots and
push the shelf down.
NOTE: Make sure the shelf tabs are in place behind all the slots,
as shown.
Removing the Drawer
1. Unload the contents from the drawer.
2. Slide out the drawer as far as it will go.
3. Press the lever down on the right-hand track and lift the lever up
on the left track to release the drawer. Pull the drawer out the rest
of the way.
A
A. Lever
Replacing the Drawer
1. Align the drawer guides with the receiving glides.
2. Hold the receiving glides firmly and insert the drawer guide.
NOTE: It is normal for the drawer to close tightly the first time
after it has been removed.
3. Push the drawer in completely.
A
B
A. Slot
B. Shelf tab
3
GLADIATOR® GARAGEWORKS
PREMIER MODULAR CABINET WARRANTY
LIFETIME LIMITED WARRANTY
For the life of the product, when the Modular GearBox, GearBin or GearDrawer cabinet is used and maintained according to the
instructions attached to or furnished with the product, Gladiator® GarageWorks will pay for replacement or repair of the defective
product or parts to correct defects in materials or workmanship.
Gladiator® GarageWorks will not pay for:
1. Service calls to correct the installation of any Gladiator
®
GarageWorks products or to instruct you on how to use or install them.
2. Damage resulting from improper handling or shipping of products, or products damaged by accident, misuse, abuse, fire, flood,
improper installation, acts of God, neglect, corrosion, modification or mishandling.
3. Shipping or freight fees to deliver replacement products or to return defective products.
4. Repairs or replacement when your product is used in other than normal, single-family household use, such as a commercial
environment or handled in any way inconsistent with the installation instructions included with the product.
5. Cosmetic damage including scratches, dings, dents or cracks that do not affect the structural or functional capability of the
product.
6. Replacement parts or product for Gladiator
®
GarageWorks products operated outside the United States or Canada.
7. In Canada, travel or transportation expenses for customers who reside in remote areas.
8. Any labor costs during the limited warranty period.
9. Damage resulting from improper loading beyond the specified maximum weight capacity outlined in the assembly instructions
provided with the product, including overloading of hooks, baskets, shelves, cabinets, and other Gladiator
®
GarageWorks
accessories used with the product.
10. Surfaces damaged due to chemical interaction resulting in corrosion of paint or metal.
11. Replacement keys or locking mechanism.
12. Loss of product contents due to theft, fire, flood, accident or acts of God.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE
IMPOSED BY LAW ARE LIMITED TO ONE YEAR, OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES
DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized Gladiator® GarageWorks dealer to
determine if another warranty applies.
If you need service, call the Gladiator
®
GarageWorks Customer eXperience Center, 1-866-342-4089 (toll-free), from anywhere in the
U.S.A. In Canada, contact your Whirlpool Canada LP designated service company or call 1-800-807-6777.
In the United States, Gladiator
®
GarageWorks means Whirlpool Corporation, Benton Harbor, Michigan 49022. In Canada, Gladiator®
GarageWorks means Whirlpool Canada LP, Mississauga, ON L5N 3A7. 9/07
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Write down the following information about your Modular
GearBox, GearBin or GearDrawer cabinet to better help you
obtain assistance or service if you ever need it. You will need to
know your complete model number and serial number. You can
find this information on the model and serial label located on the
back of the product.
4
Dealer name____________________________________________________
Address ________________________________________________________
Phone number __________________________________________________
Model number __________________________________________________
Serial number __________________________________________________
Purchase date __________________________________________________
Loading...