Gladiator GAMT28KDFG Assembly Instructions
PREMIER 2-DRAWER -
UTILITY CART
Assembly Instructions
CHARIOT UTILITAIRE À
2 TIROIRS DE GRANDE QUALITÉ
Instructions d’assemblage
CARRO DE SERVICIO
PREMIER DE 2 CAJONES
Instrucciones de ensamblaje
TABLE OF CONTENTS/TABLE DES MATIÈRES/ÍNDICE
CART SAFETY ........................................ 2
ASSEMBLY INSTRUCTIONS ................. 3
WARRANTY ............................................ 6
SÉCURITÉ DU CHARIOT
INSTRUCTIONS D’ASSEMBLAGE ........ 8
GARANTIE ............................................ 11
......................... 7
SEGURIDAD DEL CARRO DE
SERVICIO
INSTRUCCIONES DE
ENSAMBLAJE. ..................................... 13
GARANTÍA ............................................ 16
............................................... 12
W10866931A
IT’S TIME TO RETHINK THE GARAGE.®
LE GARAGE REPENSÉ.™
ES TIEMPO DE VOLVER A PENSAR EN EL GARAJE.™
In U.S.A. call: 1-866-342-4089
Aux É.-U. : 1 866 342-4089
En EE.UU. Ilame al: 1-866-342-4089
In Canada call: 1-800-807-6777
Au Canada : 1 800 807-6777
En Canadá Ilame al: 1-800-807-6777
www.GladiatorGW.com
www.gladiatorgarageworks.ca
UTILITY CART SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Cart Use Requirement
follow instructions.
You
can be killed or seriously injured if you don't
instructions.
follow
WARNING
Excessive Weight Hazard
Use two or more people to move or assemble utility
cart.
Failure to do so can result in back or other injury.
■ Maximum weight limit is 500 lbs (226.8 kg) for the cabinet.
■ Maximum weight limit is 50 lbs (22.7 kg) for the drawer.
■ Maximum weight limit is 150 lbs (68 kg) for the tray.
2
ASSEMBLY INSTRUCTIONS
A
CC
AA
C
B
F
E
D
BB
Assembly Diagram
Tools and Parts
Gather the required tools and parts before starting assembly.
Tools Needed:
■ 10-mm Wrench
■ 12-mm Wrench
Parts Supplied:
Part Description and Quantity
M6x12 bolt (30)
AA
M6x16 bolt (2)
BB
M6 nut (32)
CC
M8x20 bolt (16)
DD
■ Slotted or Phillips screwdriver
■ #5 Allen Wrench
DD
Part Description and Quantity
Drawer body (1)
A
Bottom tray (1)
B
Upright support (4)
C
Side handle (1)
D
Caster without brake (2)
E
Swivel caster with brake (2)
F
3
Unpacking Utility Cart
NOTE: Keep the packing materials to cushion the cabinet during
assembly and then dispose of/recycle all packaging materials.
1. Remove the cabinet, parts, and fasteners.
2. Verify contents. See “Parts Supplied.”
Install Upright Supports to Tray
and Drawer and Side Handle
1. Attach upright supports (C) to bottom tray (B), using 4 sets of
bolts (AA) and nuts (CC) for each upright support.
4. Install side handle (D) at the same time on preferred side by
inserting bolts (BB) through side handle (D), upright supports
(C) and drawer body (A) and tighten with nuts (CC).
CC
A
BB
D
CC
AA
2. Lay cart on its back.
3. Attach drawer body (A) on the other end of upright supports (C)
using 4 sets of bolts (AA) and nuts (CC).
CC
AA
C
A
C
5. Square up cart and tighten securely. See assembly diagram.
Attaching Casters
1. Be sure drawers are locked and lay cart on top of packing
material.
2. Attach swivel brake plastic casters (F) to the cart on the same
side as the handle, inserting bolts (DD) through bottom tray
(B).
B
F
DD
C
4
3. Repeat this process for the caster without brake (E) on the
opposite side of the cart.
4. Return the cart to its upright position.
Complete the Installation
1. Unroll the drawer liners and place a liner in each of the drawers.
2. Place the pad on the top of the cabinet.
Use, Remove, and
Replace the Drawers
NOTES:
■ The key locks the roll-away cabinet and all of the drawers.
■ Use the drawer liners to avoid scratching or damaging the
drawer finish.
Removing the Drawer
1. Unload the contents from the drawer.
2. Slide out the drawer as far as it will go.
3. Lift the lever up on the right-hand track and press the lever down
on the left track to release the drawer. Pull the drawer out the
rest of the way.
Replacing the Drawer
1. Align the drawer guides with the receiving glides.
2. Hold the receiving glides firmly and insert the drawer guide, being
careful that they are properly positioned.
NOTE: It is normal for the drawer to close tightly the first time
after it has been removed.
3. Once properly insterted, push the drawer in completely to
set the glides in their proper positions.
Care and Cleaning
■ Periodically clean the drawer fronts, drawer trim, and other
surfaces with a mild detergent and water.
5
Loading...