Gladiator GAGB54SBJSG, GAGB54SBJG, GAGB54SBJW Owner's Manual

Model / Modèle / Modelo:

GAGB54SBJG: Hammered Granite/Silver /

Ardoise martelée/argenté / Granito forjado/plata GAGB54SBJW: Hammered White/Gray Slate / Blanc martelé/ardoise grise / Blanco forjado/Teja gris GAGB54SBJSG: Hammered Granite/Granite Slate / Ardoisemartelée/ardoise gris / Granito forjado/Teja de granito

HARDWOOD STORAGE/ SHOE BENCH

Assembly Instructions

BANC DE RANGEMENT/ POUR CHAUSSURES ENBOIS DUR

Instructions d’assemblage

BANCO DE MADERA DURA PARA ALMACENAMIENTO/ CALZADO

Instrucciones de ensamblaje

TABLE OF CONTENTS/TABLE DES MATIÈRES/ÍNDICE

STORAGE/SHOE BENCH SAFETY .......... 2

STORAGE/SHOE BENCH PARTS ............ 3

ASSEMBLY INSTRUCTIONS ....................4

Storage/Shoe Bench

Use Requirements ..................................4

Storage/Shoe Bench Parts ..................... 4

Tools and Parts .......................................4

Attach Back Panels ................................4

Attach the Bottom Panel ........................5

Assemble Shelves (Optional) .................. 5

Install Doors (Optional) ...........................5

Registering Your Product ........................5

WARRANTY ............................................... 6

SÉCURITÉ DU BANC DE RANGEMENT/

POURCHAUSSURES ............................... 7

PIÈCES DU BANC DE RANGEMENT/

POURCHAUSSURES ............................... 8

INSTRUCTIONS D’ASSEMBLAGE ........... 9

Exigences pour l’utilisation du banc

derangement/pourchaussures .............. 9

Pièces du banc de rangement/pour

chaussures .............................................. 9

Outils et pièces ....................................... 9

Fixer les panneaux arrière ....................... 9

Fixer le panneau inférieur......................10

Assemblage des étagères (facultatif) .... 10

Installation des portes (facultatif) .......... 10

Enregistrement de votre produit ...........10

GARANTIE ............................................... 11

SEGURIDAD DEL BANCO PARA

ALMACENAMIENTO/CALZADO ............ 12

PIEZAS DEL BANCO PARA

ALMACENAMIENTO/CALZADO ............ 13

INSTRUCCIONES DE ENSAMBLAJE .... 14

Requisitos de uso del banco para

almacenamiento/calzado ...................... 14

Piezas del banco para

almacenamiento/calzado ...................... 14

Herramientas y piezas ..........................14

Fije los paneles traseros .......................14

Cómo añadir el panel inferior ................15

Ensamble los estantes (opcional) .........15

Instale las puertas (opcional) ................15

Cómo registrar el producto ...................15

GARANTÍA ............................................... 16

W11363514A

In U.S.A. call: 1-866-342-4089

Aux États-Unis, composer le: 1866342-4089

En los EE.UU., llame al: 1-866-342-4089

In Canada call: 1-800-807-6777

Au Canada, composer le: 1800807-6777

En Canadá, llame al: 1-800-807-6777

www.gladiatorgarageworks.com

STORAGE/SHOE BENCH SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

You can be killed or seriously injured if you don't immediately

DANGER

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

follow instructions.

You

can be killed or seriously injured if you don't

instructions.

STORAGE/SHOE BENCH PARTS

#10-24 x 1/4" long Phillips-head Screw

Label Nomenclature Qty.

P1 P2

#10-24 x 1/4" long Phillips-head Screw 6

#8 x 1/2" long Phillips-head Screw 4

#10-24 Wing nut

Left Side Panel 1

Hardwood Top 1

Right Side Panel 1

Bottom Panel 1

Back Panel 1

Leveler Feet 4

24" Shelf (Optional) 2

Left Hand Door (Optional) 1

Right Hand Door (Optional) 1

#10-24 Wing Nut 4

#8 x 1/2" long Phillips-head screw

ASSEMBLY INSTRUCTIONS

Storage/Shoe Bench Use

Requirements

■ Intended for use in a garage.

■ Maximum weight limit is 35 lbs (15.9 kg) for each shelf.

■ Maximum weight limit is 500 lbs (227 kg) for the hardwood

storage/shoe bench.

Storage/Shoe Bench Parts

1. Remove and verify the contents. Contents include the parts

and fasteners shown in “Parts.”

2. Dispose of/recycle all packaging materials.

Tools and Parts

Gather the required tools before starting installation.

Tools Needed:

■ 1/2" wrench

■ Phillips-head screwdriver

■ Level

WARNING

Excessive Weight Hazard

Use two or more people to move, assemble or install cabinet.

Failure to do so can result in back or other injury.

Attach Back Panels

#10-24 x 1/4"

long Phillips-head Screw (2)

1. Slide in the back panel (P5) so that the tabs in the back

panel are aligned with the slots of the side panels. There are two tabs on each side of the panel (See detail to illustration below).

2. Push in and ensure the four tabs are fully engaged in the slots.

3. Attach the four #8 x 1/2" long Phillips-head screws (F3) to the

hardwood top (P2).

4. Attach the two #10-24 x 1/4" long Phillips-head screws (F1)

between the side panels (P3 and P1) and back panel (P5). Do not fully tighten the screws. This will be done later.

F1 #10-24 x 1/4" long Phillips-head screw (2) F3 #8 x 1/2" long Phillips-head screw (4)

long Phillips-head screw (4)

#8 x 1/2"

IMPORTANT:

■ Two people may be required to complete the assembly.

■ The hardwood top (P2) is intentionally designed so that the

heads of the lag bolts which were pre-assembled on the hardwood top (P2) will match with the key holes on the side panel (P3 and P1) only when it is positioned correctly. If the bolt heads on the hardwood top (P2) do not match with the key holes on the side panel (P3 and P1), turn the hardwood top (P2) around.

1. Place the hardwood top (P2) on oor (upside down, with the

protruding lag bolt heads pointing upward).

2. Assemble the left side panel (P1). Place the panel

perpendicular to workbench top, making sure to align the key holes in the panel with the pre-assembled lag bolts in the top.

3. Use a wrench to tighten the two lag bolts [which were

pre-assembled onto the hardwood top (P2)]. Fully tighten the bolts.

4. Repeat above steps 2 and 3 for the other cabinet side.

Attach the Bottom Panel

Assemble Shelves (Optional)

WARNING

#10-24 x 1/4"

long Phillips-head Screw (4)

1. Place the bottom panel (upside down so the mating edges are

pointing up), and make sure that the four tabs and slots are fully engaged.

2. Attach the #10-24 x 1/4" long Phillips-head screws (F1)

between the back panel (P5) and the bottom panel (P4). Do not fully tighten the Phillips-head screws.

#10-24 wing nut (4)

Excessive Weight Hazard

Use two or more people to move, assemble or install cabinet.

Failure to do so can result in back or other injury.

Use two or more people to turn the storage/shoe bench over to an upright position. Install the shelf (P7) at the desired location. Insert both tabs fully into the slots at an angle, and then straighten shelf to fully engage the slots in the tabs.

Install Doors (Optional)

3. Install and tighten the four #10-24 wing nuts (F2) (hand tight)

onto the protruding screw threads (included on the bottom panel) at each of the four corners.

4. Install the leveler feet (P6) to the bottom panel (P4).

5. Tighten all #10-24 x 1/4" long Phillips-head screws (F1) and

all remaining loose screws from the previous steps.

1. Assemble the right-hand door (P9) rst, as you face the front

of the storage/shoe bench.

2. Engage the door top with the rail by placing the two top pins

into the guides, and then push the pins in (collapse) against the rail.

3. Swing the door bottom down and push in to make the rollers

engage into the bottom rail. Slide the door back and forth several times to ensure the door is engaged completely.

4. Repeat steps 2 and 3 to assemble the left hand door (P8).

Registering Your Product

There are many benets to registering your product. Find out more and register your product online at www.gladiatorgarageworks.com. Consumers in Canada can call 1-800-807-6777.

+ 11 hidden pages

Gladiator GAGB54SBJSG, GAGB54SBJG, GAGB54SBJW Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

STORAGE/SHOE BENCH SAFETY

STORAGE/SHOE BENCH PARTS

ASSEMBLY INSTRUCTIONS

Storage/Shoe Bench Parts

Tools and Parts

Attach Back Panels

Attach the Bottom Panel

Assemble Shelves (Optional)

Install Doors (Optional)

Registering Your Product