Glacier bay HD67496-1027D, HD67496-1008D2, HD67496-1001 User Manual

Internet# 305514644 305514649 305188341

Model#

HD67496-1001

HD67496-1027D

HD67496-1008D2

SKU# 1003252883 1003252885 1003228365

INSTALLATION AND CARE GUIDE

PULL-DOWN KITCHEN FAUCET

Questions, problems, missing parts?

Before returning to the store, call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER (1-855-434-5224)

HOMEDEPOT.COM

THANK YOU

We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this kitchen

faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see

our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

4/2018 REV.01HOMEDEPOT.COM

Table of Contents

Important Information ..............................2

Warranty ...................................................2

Pre-Installation .........................................2

Planning Installation ..............................2

Tools and Hardware Required ...............2

Installation ................................................4

Operation...................................................7

Care and Cleaning ....................................8

Troubleshooting ........................................8

Service Parts

...........................................

Package Contents ..................................3

Important Information

□ Observe all local plumbing and building codes. □ Cover the sink drain to avoid losing any parts. □ Review the care and cleaning section included in this guide.

Warranty

LIMITED LIFETIME WARRANTY

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective. Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-

5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer purchaser must be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and tear. This warranty excludes all industrial, commercial and business usage, whose purchasers are hereby extended a ve year limited warranty from the date of purchase, with all other terms of this warranty applying except the duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for more details.

Contact the Customer Service Team at 1-855-434-5224 or visit www.HomeDepot.com.

Pre-Installation

PLANNING INSTALLATION

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package Contents list. If any part is missing or damaged, do not attempt to install the product. Contact Customer Service for replacement parts..

TOOLS AND HARDWARE REQUIRED

Adjustable wrench

Safety goggles

SILICONE

Silicone sealant

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

A 1

Faucet assembly

B FastMount™ 1 C 1

Quick connector

D Escutcheon 1 E 1Gasket

F Weight 1 G Weight clip 1

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Installation

Installing the faucet assembly

CAUTION: Always shut off the water supply before removing an existing faucet or replacing any part of a faucet. Open the faucet handle to relieve water pressure and ensure that the water is completely shut off.

NOTE: This step is for no escutcheon installation (optional). If the escutcheon will be used, install the faucet assembly as described in step 2.

□ Shut off the water supply. □ Insert the faucet body through the hole in the

sink.

Installing the faucet assembly

NOTE: This step is for escutcheon installation (optional). If the escutcheon will not be used, install the faucet assembly as described in step 1.

□ Place the escutcheon (D) and the gasket (E) on

the bottom of the new faucet assembly (A).

□ Insert the faucet assembly (A) through the hole

in the escutcheon (D).

NOTE: A silicone is required under the gasket (E).

D E

SILICONE

Installation (continued)

Securing the faucet assembly

□ From underneath the sink, secure the faucet

assembly to the sink with the FastMount™ system (B). Push the FastMount™ system (B) up over the threads until it stops against the bottom of the sink, then hand turn (clockwise) to tighten (Fig 1).

Attaching the quick connector

to the receiving block

□ Push the quick connector (C) rmly upward and

attach it to the receiving block (1). Pull down moderately to ensure the connection has been made.

Push

Sink

Fig 1

Push

Screw

Sink

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Installation (continued)

Installing the weight

□ Install the weight clip (G) at the point of the

hose marking “weight here”.

□ Insert the weight (F) onto the clip (G) by sliding

it down onto the clip (G).

Making the water supply

connections

NOTE: The hot side inlet tube is indicated by a label. Avoid twisting wires together or placing the wires close to each other and damaging.

□ Thread the nut (1) on the supply line onto the

outlet of the water supply valve (2) and tighten with a wrench. Do not overtighten.

Weight here

Weight

here

Operation

Flushing and checking for leaks

IMPORTANT: After installation is completed, turn on the hot and cold water supplies. Check for leaks. Do not lose the gasket (1) in the hose.

□ Pull the hose assembly out of the spout and

remove the spray head by unscrewing it from the hose in a counterclockwise direction. Be sure to hold the end of the hose down into the sink and turn the faucet to the warm position where it mixes hot and cold water.

□ Flush the water lines for one minute. This ushes

away any debris that could cause damage to internal parts. Check for leaks.

□ Re-tighten any connections if necessary, but do

not overtighten. Reinstall the spray head by hand tightening it back onto the spray hose in a clockwise direction.

Removing the quick connector

□ If it is necessary to remove the quick connector

(1), squeeze the tabs (2) on the quick connector and then pull down to disconnect.

Squeeze

7 HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Pull down

Care and Cleaning

□ To clean, wipe down with a damp cloth and dry with a towel. □ Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will

be voided.

Troubleshooting

NOTE: Refer to the service parts section in this manual for

a detailed drawing showing the location of the parts listed below.

Problem Possible Cause Solution

There are leaks underneath the handle.

The bonnet nut has come loose and the o-ring on the cartridge is dirty or damaged.

□ Tighten the bonnet nut. Clean

or replace the o-ring.

The aerator leaks or has an inconsistent water ow pattern.

There are leaks from the hose underneath the deck.

The hose does not retract. The weight is not installed in the

The water pressure is low. The connector underneath the deck is

There is no hot or cold water.

There is a low ow of water.

The aerator is dirty or mistted.

The cartridge may be clogged.

The hose and discharge tube connection may be loose.

appropriate position.

clogged with debris.

The aerator is clogged.

The water inlet hose was acccidentally kinked during installation and is limiting the water ow through.

The screen lter in the spray head is dirty. □ Turn off the water supply at

□ Remove the aerator and check

for debris in the aerator screens.

□ Remove the cartridge and check

for debris.

□ Ensure the aerator is properly

installed.

□ Tighten the connection between

the discharge tube and hose.

□ Reinstall or readjust the weight.

□ Turn off the water supply and

disconnect the connector / aerator.

□ Unscrew the connector / aerator

and clean under running water.

□ Screw the connector / aerator

back.

□ Test water ow. If water

pressure is still low then replace the connnector / aerator.

□ Reinstall the water inlet hose.

angle stop and unscrew the spray head from spray hose.

□ Clean the screen lter in the

spray head under running water.

Service Parts

10 11

Faucet ID tags can be found on the hot water inlet

Part Description Part Number

Spray head and Hose

1 RP38407* 2 O-ring RP60006 3 Wearable ring RP64220 4 Cartridge RP20044 5 Bonnet nut RP70528 6 Cap RP80503* 7 Screw RP50015 8 Handle 9 Set screw RP50002

10 Block RP70421

*Specify Finish

Many replacement cartridges, aerators, and drain assemblies can be purchased at your local The Home Depot store or online at HOMEDEPOT.COM

RP13433*

Part Description Part Number

11 O-ring RP60002

13 O-ring RP60089 14 Weight RP70441 15 Weight clip RP64204 16 Escutcheon RP80544* 17 Gasket RP80545 18 FastMount™ RP56096

Quick connect assembly

RP70429

+ 21 hidden pages