GlacialLight GL-SP15-WW, GL-SP15S-WW, GL-SP15C-WW, GL-SP15CW, GL-SP15S-CW User Manual

User Manual

GL-SP15 Series

1. The “Warranty Period” is two (2) years. We will warrant free repair or replacement services if
the product fails or becomes defective during normal use within the prescribed warrantee
period. Please send back the product to our company or contact your local distributors for
further directions.

2. Do not change or tamper with any internal electric circuits or add in any wires or cables for
any reason.

3. Do not change the mechanical design, circuit specifications, or components; do not add any
other devices as this may cause the product to short circuit or may create other unforeseen
risks.

4. Keep the lamp set in a dry environment in order to avoid any electricity leakage.

5. To avoid electrical shocks and possible malfunction, please do not insert objects of any
nature into the LED product.

6. For further information, please contact us.

CAUTION

Best Position

CAUTION

CLASS 2 LED LIGHT

DO NOT STARE INTO THE BEAM

GL-SP15

100V-240V~ 50-60Hz

Thanks for your choice of LED

SP15 series products. Please

ensure that you install and use the

product according to the below

directions to enable the correct

implementation and normal

functioning of the LED product.

Should you not follow these directions,

you will not be compensated in
accordance with the warrantee. We will not
take any responsibility from the improper
use and implementation of the product, and
for any associated damage caused by such
irresponsible and negligent actions.

1. Before installation,
please turn off the
power switch for the
existing bulb.

2. Please make sure that the specifications
of the power connector and the output
voltage are compatible to the LED
fixture used.

• Pick a vantage point based on the directions of human and car traffic

• Install the sensor at a location within 10 ~ 15 meter radius of the vantage point, 2.5 ~ 3 meter high and at an angel of adjustable
sensor is up / down 10° ~ 30° (best at 90 degree)

• Make sure the sensor is firmly screwed

Worst sensing effects

(Straightline moving forward)

Insufficent range due to low sensing angle

Short sensing range and prone to false detections
due to high sensing angle

4. Screw the LED fixture tight onto a wall
or a stand and adjust the angle in
accordance with individual needs.

5. Please plug the unit into an appropriate
power socket and turn the power on. If the
lamp does not work, please repeat steps
1-4 until it does work.

Installation process

Please get professional installation personnel to set up the fixture.

Indicators on the bottom of
the sensors

1. SENS: The intensity of sensing. + indicates strong sensing.

- indicates weak sensing.

2. LUX: The brightness of the environment. Moon mark (3lux)
indicates night sensing; effective when human
entering the sensing area in low illuminations. Please
avoid strong light resource because it may lead
sensor to false detections. Sun Mark (5lux) indicates
24-hour sensing regardless day or night. It is effective
whenever human entering the sensing area.

3. TIME: The light up time of sensing. From 7 seconds to 12

minutes.

SENS LUX TIME

10 m
15 m

(Lateral Moving)

Best sensing effects , Longest sensing range

2.5 m
3 m

3 m

Installation height and sensing angle are proper

~

~

10 m ~ 15 m

3 ~ 5 m

90° ~ 100°

30° ~ 35°

Ground wire
green

AC wire (N)
white or blue

AC wire (L)
black or brown

AC wire (L)
black or brown

AC wire (N)

white or blue
Ground wire
green

3. At the rear side of the LED fixture, please connect the Live (L)
and Neutral (N) terminal are used for connecting to power
output. Please follow the standard process to connect them
accordingly and do insulation on both terminal respectively.

Optical

Mechanical and Dimension

Electrical

Temperature Condition

Model No.

CCT (Typical)

GL-SP15-WW
(Warm White)

GL-SP15CW
(Cool White)

GL-SP15S-WW /
GL-SP15C-WW

(Warm White)

GL-SP15S-CW /

GL-SP15C-CW

(Cool White)

Luminous Flux (lm)
Typical Luminous Efficacy

CRI (Ra)
Beam Angle

Net. Weight

Power Factor

Cover

3000 K

650 lm

33 lm / W 31 lm / W

> 80

30° / 60° (Optional)

6000 K

950 lm

48 lm / W 46 lm / W

> 75

Outline Dim.

Ψ185 × 175 × 130 (mm) Ψ185 × 260 × 140 (mm) Ψ185 × 175 × 130 (mm) Ψ185 × 260 × 140 (mm)

Specifications

GL-SP15 Series Outlook

All rights reserved. All brand names and trademarks are the properties of their respective owners.
The specifications are subject to change without notice.

17-SP15S000001

» GL-SP15

Sensor Style
Sensing Coverage
Detection Range
Light Up Time
Operating Hours
Protection Device

Image Pick-up Device

Sony 1/3" color CCD

Gamma Characteristic
Lens Furnished
Video Output
S/N Ratio

Automatic infrared heat detector

4-15 meters. Center-horizontal moving

90° – 110°

7 seconds to 12 minutes

24 hrs

Inlaid with 220 V / 10A 5 x 20 mm fuse

Gain Control
Signal
Horizontal Resolution

0.45

Board lens 3.6 mm / 6 mm / 8 mm / f2.0

1 vp-p composite video / 75 ohms

More than 48 dB

Automatically

24H 1Vp-p video signal output

380TVL (optional 480TVL / 540TVL)

Sensor (optional)

CCD (optional)

Lux at 1 M (60°)
Lux at 1 M (30°)

373 450

1025

1.2 (Kgs)

20 W

> 0.9 for 115V AC; > 0.8 for 230V AC

100-240V AC

21 W 20 W 21 W

1.3 (Kgs) 1.2 (Kgs) 1.3 (Kgs)

1265

-20 °C － +40 °C

-40 °C － +85 °C

185.0 mm 130.0 mm

175.0 mm

185.0 mm

140.0 mm

260.0 mm

» Sensor - GL-SP15S

185.0 mm

260.0 mm

140.0 mm

» CCD (Optional) - GL-SP15C

Clear

Typical Power consumption

Input Voltage

Operating Temperature
Storage Temperature

Ø

m

SP-15W-CW 60°

m

1 m

2 m

3 m

4 m

5 m

0.58 m

1.16 m

1.73 m

2.3 m

2.89 m

450

lux

112 .5

56.2

28.1

18

Ø

m

m

1 m

2 m

3 m

4 m

5 m

0.58 m

1.16 m

1.73 m

2.3 m

2.89 m

373

lux

93.3

46.4

23.3

14.9

Ø

m

m

1 m

2 m

3 m

4 m

5 m

1265

lux

316.3

164.7

79.1

50.6

0.27 m

0.54 m

0.8 m

1.07 m

1.34 m

Ø

m

m

1 m

2 m

3 m

4 m

5 m

1025

lux

256.3

130

64.1

41

0.27 m

0.54 m

0.8 m

1.07 m

1.34 m

SP-15W-WW 60° SP-15W-WW 30°

SP-15W-CW 30°

5050 (LUX)0

15°

30

°

45

°

60°

75°

90°

75°

60

°

45°

30°

15°

0°

4030201010203040 150150 (LUX)0

15°

30

°

45°

60°

75°

90°

75°

60

°

45

°

30

°

15

°

0°

120906030306090120

200200 (LUX)0

15°

30°

45°

60°

75°

90°

75°

60°

45

°

30

°

15°

0°

15010050501001506060 (LUX)0

15°

30°

45°

60

°

75°

90°

75°

60

°

45°

30

°

15°

0°

40202040 503010103050

Candle Power Distribution Curve ( 15 W / 3 M)

IP55 IP65 (without sensor type)