Glacial 8LDIECHK-SC-WFC-VW-SSP User Manual
If you have a question or problem, please contact
info@eastwestintl.com for assistance.
Self cleaning
Hot & Cold Hidden
Bottle Water Cooler
with Display
Model :
8LDIECHK-SC-WFC-VW-SSP
TO REDUCE THE RISK OF INJURY AND
PROPERTY DAMAGE, USER MUST READ
THIS MANUAL BEFORE ASSEMBLING,
INSTALLING & OPERATING DISPENSER.
SAVE THIS MANUAL FOR
FUTURE USE
USER MANUAL
8LDIECHK-SC-WFC-VW-SSP © 2012 Electrotemp Technologies Inc. PN: 5M009363X1
2
SAFETY PRECAUTIONS
To reduce risk of injury and property damage, user must read this entire manual
before assembling, installing & operating dispenser.
Failure to execute the instructions in this manual can cause personal injury or
property damage.
This product dispenses water at very high temperatures. Failure to use properly
can cause personal injury.
When operating this dispenser, always exercise basic safety precautions,
including the following:
• Prior to use, this dispenser must be properly assembled and installed in
accordance with this manual.
• This dispenser is intended for water dispensing only. Do NOT use other liquids. Do
NOT use for other purposes. Never use any other liquid in the dispenser other than
known and microbiologically safe bottled water. Warranty is void if used for any
other liquids including coffee, tea, juices, beer or wine.
• For indoor use only. Keep water dispenser in a dry place away from direct sunlight.
Do NOT use outdoors.
• Install and use only on a hard, flat and level surface.
• Do NOT place dispenser into an enclosed space or cabinet.
• Do NOT operate dispenser in the presence of explosive fumes.
• Position back of dispenser no closer than 4 inches from wall and permit free airflow
between wall and dispenser. There must be at least 4 inches clearance on the
sides of the dispenser to permit airflow.
• Use only properly grounded outlets.
• Do not use an extension cord with your water dispenser.
• Always grasp plug and pull straight out from outlet. Never unplug by pulling on
power cord.
• Do NOT use dispenser if cord becomes frayed or otherwise damaged.
• To protect against electric shock, do NOT immerse cord, plug, or any other part of
cooler in water or other liquids.
• Ensure dispenser is unplugged prior to cleaning.
• Never allow children to dispense hot water without proper and direct supervision.
Unplug unit to prevent unsupervised use by children.
• Service should be performed only by a certified technician. Please contact us at
888-828-1426 for assistance.
WARNING
3
SAFETY PRECAUTIONS - Electrical Requirements
WARNING
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
A 120 volt, 60 Hz., AC only, 15- amp, fused electrical supply is required. A time-delay
fuse or circuit breaker is recommended. Do not overload the ciruit, provide separate
circuit, if required, to serve only this appliance.
This water cooler is equipped with a power supply cord having a 3 prong grounding plug.
To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong,
grounding-type outlet, grounded in accordance with local codes and ordinances,a mating
outlet is not available, it is the personal responsibility and obligation of the customer to
have the properly grounded outlet installed by a qualified electrician.
If codes permit and a separate ground wire is used, it is recommended that a qualified
electrician determine that the ground path is adequate.
Do not ground to a gas pipe.
Check with a qualified electrician if you are not sure the water cooler is properly grounded.
Do not have a fuse in the neutral or ground circuit.
GROUNDING INSTRUCTIONS
For a grounded, cord-connected water cooler:
This water cooler must be grounded. In the event of a malfunction or breakdown, grounding
will reduce the risk of electrical shock by providing a path of least resistance for electric
current. This water cooler is equipped with a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the
appliance is properly grounded.
Do not modify the plug provided with the appliance-if it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
“Please make sure that ELECTRICAL OUTLET IS PROPERLY WIRED
TO CORRECT SIZED CIRCUIT BREAKER OR FUSE AND PROPERLY
GROUNDED. MUST BE WIRED TO HAVE CORRECT POLARITY.”
4
IMPORTANT: Do NOT Return Dispenser To Store.
TABLE OF CONTENTS
KEY INFORMATION FOR FUTURE USE
Please register your dispenser immediately at
www.electrotemp.com
For future support please record your serial number (located on
label on back of dispenser) and date purchased. Staple your
receipt to manual.
You will need this information to obtain warranty service.
Product Self Cleaning Hot & Cold Hidden
Bottle Water Cooler With Display
Model Number 8LDIECHK-SC-WFC-VW-SSP
Serial ID Number
Date of Purchase
Safety Precautions ........................................................................
Safety Precautions-Electrical Requirements..................................
Key Information for Future Use .....................................................
Specifications .............................................................................
Parts & Features ........................................................................
Assembly ......................................................................................
Installation ..................................................................................
Operation ......................................................................................
Self Cleaning ................................................................................
Guide for installation and use of ALKALINE FILTER ....................
Proper Care & Cleaning ...........................................................
Display’s Operation explanation .................................................
Troubleshooting .........................................................................
2
3
4
5
5
6
6
7
10
11
13
14
16
5
SPECIFICATIONS
PARTS & FEATURES
Power Supply
Refrigerant Type
Max Cold Water Power
Cold Capacity / Hour
Cold Temp Range
Hot Water Power
Hot Capacity / Hour
Hot Temp Range
Dimensions
Net Weight
Control: Hot Water
Hot Water Release
Control: Cook Water
Control: Cold Water
LCD display
Tap: Hot Water
Tap: Cook Water
Tap: Cold Water
Drip Tray
Door
Bottle Tray (Inside)
Heating System Priority Switch
Power Cord
LED Night lights
Carry Handle
Bottle Probe
Door Switch
Water Pump
Filter
Drain Plug
120V~/60Hz / 6.5A
R-134A
100W
≥5 L/H
3°C – 10°C / 37.40F- 500F
650W
≥5 L/H
80°C – 92°C / 1760F - 197.60F
102.8 H x 32 W x 38.2 D(cm)
40.8 H × 12.6 W x 15 D (inch)
16.9kg / 37.3Ibs
1
2
4
3
6
7
8
14
9
10
11
15
20
21
16
17
18
13
19
1
2
3 4 5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
5
12
LIGHTS
ON/OFF
ON/OFF
HEAT
6
WARNING
ASSEMBLY
Keep plastic bags away from children.
1. Remove dispenser from packaging.
2. Unpack drip tray and insert into dispenser.
3. Remove protective packaging from around probe.
4. Properly dispose all of packaging.
1. Place dispenser upright.
2. Locate water cooler on a hard and level surface in a cool shaded location
near a grounded wall outlet.
Notice: Do NOT plug in power cord yet.
3. Position water cooler so the back is at least 4 inches from wall and there
are at least 4 inches of clearance on both sides.
4. To minimize vibration and noise, make sure dispenser is level.
Notice: Do NOT plug in power cord yet.
INSTALLATION
Loading...