Glacial 75IECHK-SC-SP User Manual

IMPORTANT: Do NOT Return Dispe nser T o Store.
If you have a question or proble m, please contact 888-92 5 -2259 for
TO REDUCE THE RISK OF INJURY AND PROPERTY DAMAGE, USER MUST READ THIS MANUAL BEFORE ASSEMBLING, INSTALLING & OPERATING DISPENSER.
SAVE FOR FUTURE USE
Hot, Room a nd Cold Bottled Water Cooler
Model # 75 IECHK-S C-SP
USER MANUAL
PN 75 IE CHK-S C- SP © 2012 E le ctrotemp T echnologies I nc. BF 5 M000023XW VA
Model # 75IECHK-SC-SP :Page 2
SAFETY PRECAUTIONS
To reduce risk of injury and property damage, user must rea d this entire manual before assembling, installing & operating dispe nser.
Failure to e xecute the instructions in this ma nual can cause personal injury or property damage.
This product dispense s water a t ve ry high temperatures. F ailure to use properly can cause personal injury.
When ope ra ting this dispense r, alwa ys e xe rcise basic safety pre cautions, including the following:
Prior to use, this dispenser must be properly assembled and installed in accordance with this manual.
This dispenser is intended for water dispensing only. Do NOT use other liquids. Do NOT use
for other purposes. Never use any other liquid in the dispenser other than known and microbiologically safe bottled water. Warranty is void if used for any other liquids including coffee, tea, juices, beer or wine.
For indoor use only. Keep water dispenser in a dry place away from direct sunlight. Do NOT
use outdoors.
Install and use only on a hard, flat and level surface.
Do NOT place dispenser into an enclosed space or cabinet.
Do NOT operate dispenser in the presence of explosive fumes.
Position back of dispenser no closer than 4 inches from wall and permit free airflow between
wall and dispenser. There must be at least 4 inches clearance on the sides of the dispenser to permit airflow.
Use only properly grounded outlets.
Do not use an extension cord with your water dispenser.
Always grasp plug and pull straight out from outlet. Never unplug by pulling on power cord.
Do NOT use dispenser if cord becomes frayed or otherwise damaged.
To protect against electric shock, do NOT immerse cord, plug, or any other part of cooler in
water or other liquids.
Ensure dispenser is unplugged prior to cleaning.
Never allow children to dispense hot water without proper and direct supervision. Unplug unit
to prevent unsupervised use by children.
Service should be performed only by a certified technician.please contact us at 888-828-1426
for assistance.
Turn power switch(es) ON after cooler is plugged in and fill with water.
Model # 75IECHK-SC-SP :Page 3
SAFETY PRECAUTIONS ---Electrical Requirements
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock.
GROUNDING INSTRUCTIONS
For a grounded, cord-connected water cooler: This water cooler must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resistance for electric current. This water cooler is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded.
Do not modify the plug provided with the appliance-if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
A 120 volt, 60 Hz., AC only, 15 amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. Do not overload the ciruit, provide separate circuit, if required, to serve only this appliance.
This water cooler is equipped with a power supply cord having a 3 prong grounding plug.
To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong, grounding-type outlet, grounded in accordance with local codes and ordinances,a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician.
If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.
Do not ground to a gas pipe.
Check with a qualified electrician if you are not sure the water cooler is properly grounded.
Do not have a fuse in the neutral or ground circuit.
“Please make sure that ELECTRICAL OUTLET IS PROPERLY WIRED  TO CORRECT SIZED CIRCUIT BREAKER OR FUSE AND PROPERLY GROUNDED. MUST BE WIRED TO HAVE CORRECT POLARITY.
Model # 75IECHK-SC-SP :Page 4
TABLE O F CONTENTS
KEY INF ORMATION FOR FUTURE USE
Please register your dispenser immediately at www.electrotemp.com
For future support please record your serial number (located on label on back of dispenser) and date purchased. Staple your receipt to manual.
You will need this information to obtain warranty service.
Product Hot, Room a nd Cold Bottled Water Cooler
Model Number 75IECHK-SC-SP
Serial ID Number
Date of Purchase
Safety Precautions ………......…………………… 2
Safety Precautions-Electrical Requirements … 3
Specifications ……….............................………… 5
Key information for future use..................……… 4
Parts & Features ……….......................………….. 5
Assembly ……………......................……………… 6
Cleaning prior to initial use ………..................…. 6
Installation …………………......................………. 7
Operation …………………….......................…….. 7
Proper Care & Cleaning ...................................... 9
Troubleshooting .................................................. 11
Limited warranty....................................................12
Loading...
+ 9 hidden pages