G LAB Smooth Delay SD-1 User Manual [en, fr, pl, de]

Version 2.2

Table of contents

Structure ___________________________________________________ 4
Power supply _______________________________________________ 8
Way of connecting ___________________________________________ 8
Setting INPUT GAIN and EFFECT LEVEL regulators ______________ 10
Tone parameters setting _____________________________________ 10
Effect switching off _________________________________________ 12
CTRL OUT output___________________________________________ 12
MIDI channel setting ________________________________________ 14
Controlling via MIDI commands _______________________________ 14
Technical parameters _______________________________________ 17
FCC Compliance____________________________________________ 18
Declaration of Conformity____________________________________ 19

1

2

Dear Customer!

Thank you for choosing our product.

SMOOTH DELAY SD-1 is a classic delay effect with applied MAX ANALOG
technology. Its full signal path contains discrete components with exception of single
delay realized by 24 bits DSP processor. Its analog voice circuit with characteristics
accordant to the guitar tone enables to achieve natural sound of repeats with
adjustable attenuation of the high and low frequencies. Its SMOOTH function enables
to enlarge attenuation of the high and low frequencies for successive delay repeats.
That allows SD-1 to emulate the analog and tape delay effect.

Basic characteristics:

- Delay is set by TIME knob in two ranges (from 50 ms to 640 ms and from 100 ms
to 1280 ms) or is defined by TAP TEMPO footswitch

- Backlighted FEEDBACK and LEVEL foot knobs

- BASS and TREBLE (with FREQuencies range switch) knobs and SMOOTH switch
for repeats voicing

- Two switching off modes: HARD and SOFT

- KILL DRY function

- MIDI IN input and MIDI THRU output

- CTRL OUT output for controlling external devices

3

- INPUT GAIN signal level and EFFECT LEVEL regulators

- Clickless TRUE BYPASS

- 9V DC power supply

Structure

4

1 - Effect ON/OFF footswitch

2 - HARD/SOFT OFF mode switch

3 - TREBLE – high tones setting knob

4 - BASS - low tones setting knob

5 - FEEDBACK – repeats quantity setting foot knob

6 - SMOOTH L/H switch

7 - FREQ. L/H switch of TREBLE regulator functionality range

8 - PEAK indicator

9 - ACTIV – effect ON indicator

10 - TIME – delay time indicator

11 - RANGE L/H switch of delay TIME knob range

12 - LEVEL – effect volume foot knob

13 - TIME – delay time knob

14 - MODE 1/1 / ½ switch of TAP TAMPO switch functionality mode

15 - TAP TEMPO footswitch

5

16 - IN signal connector

17 - KILL DRY switch – dry signal OFF switch

18 - OUT signal connector

19 - CTRL OUT output to control DUAL REVERB

20 - MIDI IN input

21 - MIDI THRU output

22 - 9V power supply connector

6