GitUp GIT2 User Manual

GitUp Git2 User Manual dashcamscentral.com.au

The Basic

Structure

GitUp Git2 User Manual dashcamscentral.com.au

Powering Camera On and Off

1. To power on:Press the Power/Mode button for two seconds;

2. To power off:Press and hold the Power/Mode button for four seconds.

Selecting Camera Modes

Press the Power/Mode button repeatedly to cycle through the camera modes,there are four
modes for Git2: Video;Photo;Playback;SetUp

Adjusting Camera Settings

1. Press the Power/Mode button to cycle to your desired mode;

2. Press the Setting/WiFi button to enter the setting menu for that mode;

3. Press the Power/Mode button to cycle through the options;

4. Press the Shutter/Select button to select your desired option;

5. Press the Setting/WiFi button to exit the setting menu

The Icons

GitUp Git2 User Manual dashcamscentral.com.au

GitUp Git2 User Manual dashcamscentral.com.au

Settings

Video Mode

Video Resolution

GitUp Git2 includes the video resolutions listed below.

Video Resolution

Screen Resolution

FPS

2160P

2880*2160

24

GitUp Git2 User Manual dashcamscentral.com.au

1440P 16:9

2560*1440

30

1440P 4:3

1920*1440

30

1296P

2304*1296

30

1080P 16:9

1920*1080

60/30

1080P 4:3

1440*1080

60

720P

1080*720

120/60/30

WVGA

800*480

30

VGA

640*480

240

GitUp Git2 User Manual dashcamscentral.com.au

Default Setting: 1080P/60fps

Loop Recording

Available Intervals for Loop Recording are 2,3,5,10 minutes. For example, if you set the looping
interval into 2 minutes, when you record 10 minutes video, the video will be saved into 5 files that
each file lasts 2 minutes. What's more, the last file will be covered by the latest file when SD card
will be full.

Default Setting: off

GitUp Git2 User Manual dashcamscentral.com.au

Record Audio Level

Available options for Record Audio Level are high, medium, low and mute, you can choose the
appropriate level in different conditions.

Default Setting: medium

Date Stamp

Turn the Date Stamp on, then the date mark will be shown on the screen. Otherwise, there's
nothing on it.

Default Setting: on

Time Lapse

GitUp Git2 User Manual dashcamscentral.com.au

Available Intervals for Time Lapse Video range from 200 ms to 10 minutes. The details are
below: 1F/200ms; 1F/1Sec; 1F/5Sec; 1F/10Sec; 1F/30Sec; 1F/1Min; 1F/5Min; 1F/10Min

Default Setting: off

Video Snapshot Timer

This function helps your camera snapshot a photo while recording in every interval. Available
Intervals for snapshot are: 5/10/20/30/60 secends.

Default Setting: off

White Balance

This function can help your camera work well in reduction of the color, available options for White
Balance Setting are: Auto/Cloudy/Daylight/Tungsten/Fluorescent/Blue/Light Blue/Red/Light
Red/Custom

Default Setting: auto

GitUp Git2 User Manual dashcamscentral.com.au

Custom White Balance Set

Menu Button Function

Available options for Menu Button Function are: Exposure Lock/White Balance Lock/EV and WB
Lock/Audio Recording/Gyro Stabilization. For example, once you choose the Gyro Stabilization
as the function for menu button, your camera can realize gyro stabilization while recording with
simply pressing the menu button.

Default Setting: off

EV

Exposure Value compensation affects the brightness of your video. Adjusting this setting can
improve video quality when shooting in environments with contrasting lighting conditions. Setting
Options -2.0/-1.5/-1.0/-0.5/+0/+0.5/+1.0/+1.5/+2.0

GitUp Git2 User Manual dashcamscentral.com.au

Default Setting: +0.0

ISO

ISO adjust the camera's sensitivity in low-light environments, and creates a balance between
brightness and resulting image noise. Image noise refers to the degree of graininess in the
image. Setting Options auto/50/100/200/400/800/1600

Default Setting: auto

Color

Color allows you to adjust the color profile of your video footage. Setting Options Normal/Black &
White/Sepia/Vivid

Default Setting: Normal

GitUp Git2 User Manual dashcamscentral.com.au

Gyro Stabilization

With Gyro ON, a stabilization icon will appear on the right-down screen.When the camera is in
the move, the icon is in orange color, otherwise it would be in white color.

Default Setting: Off

WDR

This feature can help your video looks clearly in the contrast between light and dark.
Default Setting: Off

Slow Motion

This feature can make the video slower than the normal. Setting Options Off/-2X/-4X/-8X
Default Setting: Off

GitUp Git2 User Manual dashcamscentral.com.au

Sharpness

Sharpness controls the sharpness of your video footage Setting Options Strong/Normal/Soft
Default Setting: Normal

Metering

Available options for Metering are: Center/Spot/Average
Default Setting: Center

FOV

FOV controls the angle of your video footage Setting Options Wide Angle/Narrow Angle
Default Setting: Wide Angle

GitUp Git2 User Manual dashcamscentral.com.au

Motion Detection

The camera will start to record when it detects motion if you enable the "motion detection"
feature, and it will stop recording after one minute if the camera doesn't detect motion.

Default Setting: Off

G-Sensor

This is a dashcam feature, its main purpose is to lock the current files while recording as soon as
it detects shake. You can set G-sensor sensitivity as from high to low. High means camera will
start recording at slightest shock, low does quite opposite.

Available options for G-Sensor are: Off/Low Sensitivity/Middle Sensitivity/High Sensitivity
Default Setting: Off

Photo Mode

Image Size

GitUp Git2 captures photos at 16MP/12MP/8MP/5MP/3MP
Default Setting:16MP

GitUp Git2 User Manual dashcamscentral.com.au

Shutter Speed

Setting Options Auto；1/30Sec；2 Sec；5 Sec；10 Sec；15 Sec；20 Sec；30 Sec；1 Min
Default Setting: Auto

Date Stamp

Turn on the Date Stamp on, then the date will show on the photo.
Default Setting: On

Time Lapse

Available Intervals for Time Lapse photo range from 200 ms to 10 minutes. The details are
below: 1F/200ms；1F/1Sec；1F/5Sec；1F/10Sec；1F/30Sec；1F/1Min；1F/5Min；1F/10Min

Default Setting: Off

GitUp Git2 User Manual dashcamscentral.com.au

Self-Timer Mode
EV

Exposure Value compensation affects the brightness of your photo. Adjusting this setting can
improve photo quality when shooting in environments with contrasting lighting conditions. Setting
Options -2.0/-1.5/-1.0/-0.5/+0/+0.5/+1.0/+1.5/+2.0

Default Setting: +0.0

ISO

ISO adjust the camera's sensitivity in low-light environments, and creates a balance between
brightness and resulting image noise. Image noise refers to the degree of graininess in the
image. Setting Options auto/50/100/200/400/800/1600

Default Setting: Auto

GitUp Git2 User Manual dashcamscentral.com.au

Color

Color allows you to adjust the color profile of your photo footage. Setting Options Normal/Black &
White/Sepia/Vivid

Default Setting: Normal

White Balance

This function can help your camera work well in reduction of the color, available options for White
Balance Setting are: Auto/Cloudy/Daylight/Tungsten/Fluorescent/Blue/Light Blue/Red/Light
Red/Custom

Default Setting: Auto

Custom White Balance

GitUp Git2 User Manual dashcamscentral.com.au

Capture Mode

Available options for capture mode are: Single/3 Sequence/10 Sequence
Default Setting: Single

Sharpness

Sharpness controls the sharpness of your photo footage Sharpness Setting Strong/Normal/Soft
Default Setting: Normal

Metering

Available options for Metering are: Center/Spot/Average
Default Setting: Center

GitUp Git2 User Manual dashcamscentral.com.au

RAW Photo Mode

GitUp Git2 can provide original photo format.
Default Setting: Off

Playback Mode

When there exists file in the camera, then you can do the operations below:

Play Current File

Delete Current File

Lock/Unlock File

GitUp Git2 User Manual dashcamscentral.com.au

Slideshow

System Setting

Quick Capture

With Quick Capture, you can quickly turn your camera on and begin capturing video or photo.
The options for this setting are on and off(default). A.To capture video with Quick Capture: With
the camera powered off, just press the Shutter/Select button for once. Your camera automatically
powers on and begins capturing video.

B.To capture photo with Quick Capture: With the camera powered off, just press the
Shutter/Select button for several seconds. Your camera automatically powers on and begins
capturing photo.

C.To stop Recording Press the Shutter/Select button again to stop recording and power off
camera.

Default Setting: Off

GitUp Git2 User Manual dashcamscentral.com.au

Beep

You can set the volume for the sound indicators to be on or off.
Default Setting: On

OSD Info

The OSD(on-screen display) setting determines whether the recording icons and file information
on video and on the viewing screen appear during playback. The options for this setting are on
and off.

Default Setting: On

Car Mode Auto-Start

GitUp Git2 User Manual dashcamscentral.com.au

GitUp action cameras can also be used as dash cameras, turn on the Car Mode Auto-Start, the
camera will start recording once it's charged/powered on and stop recording once it's uncharged
and power off.

Default Setting: Off

Custom Text Stamp

If you want to customize text stamp, you need to turn on this feature first.(Details can be seen in
FAQ)

Default Setting: On

LED Status

GitUp Git2 has added a new feature of Controlling Led Status: a) All LED On (Turn on all LED) b)
All LED Off (Turn off all LED) c) Front LED Off (Turn off front LED) d) Side LED Off (Turn off top
LED and Wi-Fi LED) e) Back LED On (Only turn on the back LED)

Default Setting: All LED On

GitUp Git2 User Manual dashcamscentral.com.au

Screen Auto Sleep

To save the battery, the screen of the Git2 can sleep automatically once it is set the Auto Sleep
time. Available settings are: off/1/3/5 minutes

Default Setting: 1 minute

Auto Power Off

When the Git2 is in non-working status , it will power off automatically after the setting time.
Available settings are: off/1/3(default)/5/10/15/30/60 minutes

Default Setting: 3 minutes

Date&Time Setting

GitUp Git2 User Manual dashcamscentral.com.au

The date &time will back to original once the camera is upgraded or defaulted, so this setting can
help your camera back to correct time.

System Language

Available options of system language for Git2 are:
English/France/Spanish/Portuguese/Dutch/Italian/Russian/Japanese/ simplified
Chinese/Traditional Chinese/Czech

Default Setting: English

Frequency

Git2 support two kinds of frequency: 50/60 Hz
Default Setting: 50Hz

GitUp Git2 User Manual dashcamscentral.com.au

TV Mode

Git2 support two kinds of TV mode: PAL/NTSC
Default Setting: PAL

RC Pairing

The interface of matching RC watch with camera, the detail is below the FAQ.

RC Working Mode
USB Mode
Format

You can remove all the files in the SD card through Format, so this feature should be used
carefully.

GitUp Git2 User Manual dashcamscentral.com.au

Default Setting

The camera will back to factory setting through the Default Setting

Version

The place which you can check the version of the firmware, especially after the upgrading to
ensure whether the upgrading is successful.