Gispen ZINN User Manual

2015.3D

USER MANUAL

ZINN

2015.3D

Move the lever up to activate
the gas spring.

SEAT HEIGHT ADJUSTMENT

Adjust the seat height with your

upper and lower leg angled at 90° to

100°. This position will result in the

least possible pressure on the upper

legs which allows for a better blood

circulation.

SEAT DEPTH ADJUSTMENT

Adjust the seat depth to a space

approximately the size of a fi st

between the seat and the backs of the

knees. This position will result in the

least possible pressure on the upper

legs which allows for a better blood

circulation.

Push the button to move the
seat forward or backward
for a longer or shorter seat
surface.

LUMBAR SUPPORT

ADJUSTMENT

Adjust in height to where the lumbar

support is on the same level as your

belt (just slightly below the hollow of

your back and just above your pelvis).

This ensures the right support of the

lower back.

Move the lumbar support on
the rear of the backrest up
or down for the right lumbar
support.

SYNCHRONOUS MECHANISM

The use of the synchronous mechanism stimulates sitting in a dynamic way. It prevents static

strain and helps to prevent complaints which are caused by sitting for long periods of time.

Therefore we recommend always setting the chair in active mode.

Starting point: Back is fi xed (turn lever fully backwards)

• Activate synchronous mechanism: Turn lever one position forward.

• Activate synchronous mechanism with active tilting mechanism:

Turn lever two positions forward.

• Fix backrest: Turn lever fully backwards.

Turn this lever backwards
or forwards to decrease or
increase the resistance.

ZINN