GIRET GMM-10 Operation Manual
GMM-Series Milling Machine Welding & Cutting accessories
GMM-10 type
Operation Manual
Read the manual carefully before use!
Shanghai GIRET Machinery and Equipment Co., Ltd.
1
GMM-Series Milling Machine Welding & Cutting accessories
Catalog
Preface
1. Note
2. Parameters
2.1 Application Scope
2.2 Parameters
2.3 Cutting Parameters
2.4 Each Cutter Cutting Parameters
3. Operation Instruction
3.1 Electric Voltage Detection
3.2 Detection Cutter
3.3 Bevel Height Adjustment
3.4 Instruction
4. Replace Cutter Head
4.1 General Protection Measures
4.2 Dismantle Milling Tool Head
4.3 Replace Milling Cutter Head
3
3
4
5
7
5. Replace Cutter Blade
5.1 Diagram
5.2 Step
6. Speed Governing Instruction
6.1 Speed Setting Table
6.2 Speed Adjustment Notes
7. Maintenance and Repair
8. Packing List
9. After-sales service
8
9
9
10
10
2
GMM-Series Milling Machine Welding & Cutting accessories
Preface
Dear customer, we are appreciating that your support for our products (GIRET)! Read the manual
carefully to avoid unnecessary losses.
1. Note
Read the manual and notes carefully, follow the technical specification.
Carry out related technical specification provided by country and DIN, VDE, CEE, AFNOR.
Danger!!!
Turn off the power before maintenance!
Check the socket, electric wire and machine before using.
Keep the machine dry, not in the humid environment.
Warning!!!
Please use the thermocutout, 30mA ultimate trip current, to protect the
machine in outdoor.
Do not use the machine beyond the performance
Unusual use will cause damage!
Put on the protective goggles, ear protector, gloves and protective
footwear!
Plug in the socket in switch-off state, and pull out the power wire after use
Notice!!!
Incorrect method will cause machine damage!
Do not lift the machine by the power cord!
Do not put the power wire behind the machine all the time or on sharp
objects!
Testing and maintenance personnel must be professional!
Please use the original accessories!
3
Loading...