Gimbal GS22 User Manual
Gimbal, Inc.
San Diego, California
United States
Gimbal™ Proximity Beacon
Series 22™
Model 900-0007-000
User Manual
360-0077-000 Revision A
Not to be copied, reproduced, or modified in whole or in part, nor its contents revealed
in any manner to others without the express written permission of Gimbal, Inc.
This technical data may be subject to U.S. and international export, re-export or transfer
(“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited.
© 2016 Gimbal, Inc. All Rights Reserved. GimbalTM is a trademark of Gimbal, Inc.
registered in the United States and other countries.
Revision History
Revision
Date
Description
A
February 08, 2015
Initial Release
360-0077-000 Revision A © 2016 Gimbal, Inc. All Rights Reserved. 2
Contents
Revision History 2
Contents 3
Intended Use 4
What is the Gimbal™ Proximity Beacon Series 22™? 4
Important safety instructions for your Beacon 4
Specifications 5
Using Your Beacon 7
Unpacking your Beacon 7
Activating your Beacon 7
Powering on your Beacon 7
Verifying Beacon state 8
(Optional) Create, assign and apply a new configuration to your Beacon 8
Installing your Beacon 10
Replacing the batteries in your Beacon 12
Troubleshooting Tips 13
Status Light Modes 13
Safety and wireless devices 15
Can I minimize my RF exposure? 15
Where can I obtain further information? 15
United States, FCC Information 16
Canada, Industry Canada Information 17
360-0077-000 Revision A © 2016 Gimbal, Inc. All Rights Reserved. 3
Intended Use
What is the Gimbal™ Proximity Beacon Series 22™?
The Gimbal™ Proximity Beacon Series 22™ (the ‘Beacon’) is a small, battery-powered
device that transmits a Bluetooth Smart/low-energy (BLE) signal that can be detected
by other devices (e.g., smartphones or other devices capable of receiving the signal).
This signal enables identifying the Beacon as well as other telemetry information to the
receiving device (e.g., battery level and temperature).
The Beacon works by periodically waking up, transmitting this signal via short-range
radio (Bluetooth Smart/LE) and then returning to a low-power state. The Beacon has no
user interface (UI), cellular or GPS capabilities. The Beacon’s identity is encoded within
the signal it transmits and includes a sub-segment device type.
Important safety instructions for your Beacon
WARNING - CHOKING HAZARD: Small parts. Not for children under 3 years of
age. This product comes with AA alkaline batteries.
CAUTION – Do not connect improperly, charge or dispose of in fire. Battery may
explore or leak.
If the battery leaks:
Do not allow the leaking fluid to come in contact with skin or clothing. If contact
has already occurred, flush the affected area immediately with clean water and
seek medical advice.
Do not allow the leaking fluid to come in contact with eyes. If contact has already
occurred, DO NOT rub; rinse with clean water immediately and seek medical
advice. Take extra precautions to keep a leaking battery away from fire, as there
is a danger of ignition or explosion.
Vapor generated from burning batteries may irritate eyes, skin, and throat. If
inhalation occurs, move to a well-ventilated area immediately and seek medical
advice.
360-0077-000 Revision A © 2016 Gimbal, Inc. All Rights Reserved. 4
Specifications
General
Dimensions
( L x W x H)
3.4 in x 3.0 in x 1.0 in
(86 mm x 77 mm x 25 mm)
Weight
6oz (170g) including batteries
Color /
Enclosure
White; opens by depressing both tabs simultaneously
Temperature
Sensor
Can sense temperatures from -4° F to 140° F (-20° C to 60° C) with an accuracy from +/-
3.6° - 7.7° F (2° - 4° C) depending on temperature; temperature is sensed/transmitted every
30 seconds; app requires use of the Gimbal SDK in order to receive temperature data
Antenna
Omni-directional (default) or Directional; Software selectable
Buttons /
LEDs
Internal power switch; External Power/Battery Status Button with LED Feedback
Terms /
Warranty /
Pricing
Terms https://manager.gimbal.com/beacon-supply-agreement
Warranty https://manager.gimbal.com/beacon-warranty
Pricing https://store.gimbal.com
Transmission
Beacon
Transmission
Type
Bluetooth® Smart (AKA Bluetooth 4.0 Low Energy); 2.4GHz Channels 37 (2400MHz), 38
(2426 MHz), and 39 (2480 MHz); non-connectable advertisements. Compatible with
iBeacon™ technology. Note: These advertising channels are allocated in different parts of
the 2.4GHz spectrum and are designed to coexist with 802.11 / Wi-Fi
Transmission
Interval
Configurable via Gimbal Manager/Gimbal Beacon Manager App
Transmission
Power
Configurable via Gimbal Manager/Gimbal Beacon Manager App from -20 dBm (Low) up to 0
dBm (Full Power)
Transmission
Typically up to ~160 ft (~50 Meters) though can often be seen at further distances in ideal,
clear line-of-sight conditions at full transmit power
Mounting
Options
Double-Sided
Adhesive
Tape
3M 4496W Tape: 2.5 in x 1.5 in (included); Manufacturer recommends a clean, dry and well
unified bonding surface for optimum adhesion and notes that the ideal application
temperature range is 70° F to 100° F (21° C to 38° C) - initial application at temperatures
below 50° F (10° C) is not recommended
http://multimedia.3m.com/mws/mediawebserver?mwsId=66666UF6EVsSyXTtnxfynxz6EVtQ
EVs6EVs6EVs6E666666--&fn=70070737427.PDF
Physical
Security
Screw
1 Torx 4-40 5/16" screw included inside back housing;
Difficult to open the device when installed
Battery
Battery Type
4 - AA Alkaline (pre-installed, ready to activate); user replaceable
Battery
Operating
Temperature
Varta/powerone: -4° F to 130° F (-20°C to 54°C)
Battery
Disposal
See Manufacturer / Manufacturer's Data Sheet
Battery Data
Sheet
http://www.vartamicrobattery.com/applications/mb_data/documents/data_sheets/DS4106.pdf
Battery Life
Typical battery life of 36 months transmitting every 100ms running 24 hours/day
Battery Level
Measurement
Measured when the Beacon is first powered and every 6 hours thereafter; app requires use
of the Gimbal SDK in order to receive battery level data from the Beacon
Environmental
Operational
Temperature
-40° F to 140° F (-40° C to 60° C) (Note: lower and upper temperature ranges may be limited
by battery type; see above)
Humidity
Survival
95% RH non-condensing
360-0077-000 Revision A © 2016 Gimbal, Inc. All Rights Reserved. 5
Compliance
Statement
RoHS/REACH Compliant
Certifications
and Safety
Country
Supported
Please visit https://manager.gimbal.com/supported-countries for the list of countries
supported by Gimbal
Safety
General Safety Requirements: UL 60950-1;
Canada, Identical to UL 60950: CAN/CSA-22.2 No. 60950-1
European Norm (Per IEC 60950-1 2nd Ed): EN 60950-1
The Beacon is not FDA certified. Any use by customer in an environment requiring such
certification is at customer’s risk and Customer is responsible for any liability resulting from
such use.
360-0077-000 Revision A © 2016 Gimbal, Inc. All Rights Reserved. 6
Loading...