Gima XC-2000 CENTRIFUGE User guide

SEDE LEGALE, OPERATIVA E COMMERCIALE InfraTec S.r.l. – Società Benefit

Via Olmo n. 5/A AZIENDA CERTIFICATA ISO 9001:2015 – ISO 13485:2016
44015 Portomaggiore (FE) ITALIA Cod. Fisc. P.iva e Reg. Imprese Ferrara 01850920388
Tel. [phone] Fax [phone] C.C.I.A.A. REA n. 203572
e-mail: [e-mail] - [e-mail] Capitale Sociale € 350.000,00 i.v.
Sito internet: www.infratec.it – www.lattato.it

1

XC-2000 CENTRIFUGE

Instructions’ Manual

OPERATION

1. Open the lid. (The unit is designed to automatically stop, when the lid is open).

2. place supplied plastic tube holder shells into the centrifuge holes. Holders are provided in
two sizes,15ml & 10ml). use the appropriate size holder for your tubes.

3. Insert the centrifuge tubes that you want to spin in a manner to balance out the specimen
tube’s weight. In order to get a smooth running centrifuge, always insert even number of
tubes on opposite sides of centrifuge with approximately the same amount of fluid in ach
tube.

4. Using the one touch swithc panel the “switch” button to get to the time function. Push the +
or – button to ad just the time setting: 1 minute to 60 minutes. Push the “switch button to
get to the speed function. Push the + or – button to ad just the speed setting: 1000 rpm to
4000 rpm in 500 rpm increments.

5. Push the start button to being program. This centrifuge has a memory setting and will run
the previous program.

6. If the tube is too short for the tube holder shell, you may use some of the soft foam
provided by the manufacturer.
Please make sure that specimen tubes are snug into holder before starting centrifuge.

SAFETY INSTRUCTIONS

• This machine is designed for indoor use on a flat surface.

• Make sure the specimen tubes are equal and balanced. Unbalanced tubes will cause the

machine to shake and not provide a smooth spinning motion.

• Make sure specimen tubes are completely sealed before turning on the centrifuge.

• Allow centrifuge to come to a complete and full stop before removing the specimens.

• Disconnect from power source before attempting to clean the inside of this machine.

• never more the centrifuge while it is running.

SEDE LEGALE, OPERATIVA E COMMERCIALE InfraTec S.r.l. – Società Benefit
Via Olmo n. 5/A AZIENDA CERTIFICATA ISO 9001:2015 – ISO 13485:2016
44015 Portomaggiore (FE) ITALIA Cod. Fisc. P.iva e Reg. Imprese Ferrara 01850920388
Tel. [phone] Fax [phone] C.C.I.A.A. REA n. 203572
e-mail: [e-mail] - [e-mail] Capitale Sociale € 350.000,00 i.v.
Sito internet: www.infratec.it – www.lattato.it

2

SPECIFICATIONS

Voltage: 220v – 50hz
Speed: Approx 1000-4000 rpm (accelerate in increment of 500 rpm’s)
Time: 1-60 min.
Capacity: 15ml o 10ml x 6
Max RCF: 1790g
Power: 80w

MAINTENANCE

Always keep the outside and inside of the machine clean. A dustcover is recommended while it is
not in use.

If you have problems operating the centrifuge, please call your dealer or authorized service
provider for help. Do not attempt to fix the machine yourself.

The decontamination of the centrifuge and its accessories falls under the responsibility of the
operator before of service request.

NOTICE

In accordance with paragraph 13 of Decree Law n. 151 (25/07/2005), “2002/95/CE, 2002/96/CE, and 2003/108/CE directives,
implement, concerning hazardous elements in electric and electronic devices and waste disposal as well”

Rubbish bin symbol on the device or on its packaging means, the product must be separately wasted at the end of its life cycle.
Sorted waste collection of the device is organized and managed by the manufacturer. End users willing to dispose the device, must

contact the manufacturer and follow his criteria and instructions in order to make possible a correct sorted wasted collection.
Proper sorted wasted collection and consequent recycling, processing and compatible environment disposal contribute to negative

environment and health effects’ prevention and supports materials’ reuse and recycling of such devices. Device’s unauthorized disposal

brings holders to administrative sanctions in accordance with the law.

Rev. 1/2021 – 01/03/2021