Gima WHEEL STRETCHER User guide

ITALIANO

PROFESSIONAL MEDICAL PRODUCTS

BARELLA CON RUOTE
WHEEL STRETCHER

ENGLISH

All serious accidents concerning the medical device supplied by us must be reported to the manufacturer
and competent authority of the member state where your registered ofce is located.

II. Technical Features

1. Product size (L x W x H): 188 x 53 x 21 cm

2. Folded size (L x W x H): 92 x 50 x 11 cm

3. Packing size (2pcs/carton): 96 x 54 x 21 cm

4. Net Weight: 8 kg Gross Weight: 9 kg

5. Load bearing: less than 159 kg

II. How to use

This separable rst‐aid folding stretcher is mainly used for transporting patients with fractures. Both ends of the
stretcher have hinge‐type clutches to separate the stretcher into a right and left part. This allows for the patient to be
quickly and gently placed onto the stretcher, operation table or bed.

III. Applied for

Approved by clinic practice, this item is suitable for ambulance, hospital battleeld gym, to carry the wounded & pa­tients. It also can be used in general operation.

IV. Cautions

1. When carrying patients with this stretcher, be sure lock tightly the fender locking device & fasten the safety belt for
safety sake.

2. In general operation, be careful not to out torn the stretcher surface.

V. Maintenance

1. Keep clean as routine (incl. sterilization).

2. Often check if any parts loose or not.

VI. Storage & transportation

1. Store this product in the place of damp proof & non-corrosion.

2. Common transporting vehicle can carry this product.

VII. Package

1. Packed in high durable carton with wooden base.

2. Packing: certicate of inspection & user’s manual & packing list.

Manufacturer

Product code Keep away from sunlight

Lot number Medical Device

Consult instructions
for use

GIMA WARRANTY TERMS

The Gima 12-month standard B2B warranty applies.

Keep in a cool, dry

place

Date of manufacture

Medical Device compliant with

Regulation (EU) 2017/745
Caution: read instructions

(warnings) carefully

Authorized representative

in the European community

TD010112 (GIMA 34077)

Zhangjiagang Tengda Machinery Manufacturer Co.,Ltd
No.999 Hongqi Road, Changyinsha

Modern Agricultural Demonstration Area,

Zhangjiagang City, Jiangsu, 215623, China

Made in China

SUNGO Europe B.V.

Olympisch Stadion 24, 1076DE, Amsterdam, Netherlands

Importato da / Imported by:

Gima S.p.A.

Via Marconi, 1 - 20060 Gessate (MI) Italy
[e-mail] - [e-mail]

www.gimaitaly.com

M34077-M-Rev.5-03.23